I am doing financial ratio analysis of a company for five years and I need to show the ratios in a trendline. I have generated seperate line charts for each ratio, but I want to combine the charts and have multiple trendlines for multiple data series in a chart.
View 3 RepliesI am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I have a set of data with 5 columns. The first column is ID. Now I have the same ID recorded several times with different data (in the other 4 columns) against the ID. I want to concatenate the data with the same ID into the same row. The data has already been sorted by ID. If it is the first time this ID appears, record the whole 5 columns. If the ID appears again, then record only the 3rd, 4th and 5th column. When I run my code, I got error 'subscript out of range (Error 9)' . It seems that the array I use has only 5 columns. But I don't know how to modify this.
VB:
Sub Patient_Detail()
Dim n As Integer 'index of rows to record to
Dim i As Integer 'index of column to record from
[Code].....
I am trying to combine ~300 workbooks into one single workbook. All 300 workbooks have the exact same header. I tried using the code from thread http://www.excelforum.com/showthread.php?p=696435 but nothing is being copied over. The only difference between my example and the other is I only need to take data from the first sheet in each data workbook. All the workbooks are located in following directory .....
View 9 Replies View RelatedI'm looking for a way for Excel to combine formulas together into a more compact form for me.
Attached is a very simple version of what I want, my actual formulas are very complex but I'd still like a way to have them automatically combined into a single cell.
Alternatively, what is a good way to break down a very complicated one-cell formula and still keep things organized?
Here is the one-cell version of a formula I work with.
[Code] .......
That formula is difficult to work with in one cell, so on another sheet I have it broken down into parts so that if one part isn't doing what I want I can change it. This takes up a LOT of space because of the other steps I do (the above formula is just one step) and I'd like to combine it together.
Attached File : Excel Formula Combination Question.xlsx‎
I've pieced together code from a number of solutions on the forum and figured out how to find the files I need to process, but can't seem to figure out the code to actually combine/append each worksheet into a single one. I've searched the "sea of options" on this forum and managed to do one thing well. Pardon all my notes embedded in the code below, but if I don't do it that way, I'll only confuse myself further (which is easily accomplished) ... or lose my notes!
I’m going to run this code from an add-in menu, which is already created and working (yeaah!) … so (I think) I need to have the code either create a file named "Master (Combined).xls" in the target folder ... or ... have a file already created in MYFOLDER and have this code delete all but the header row when the file is opened(???) The "Master (Combined).xls" workbook needs to consist of one worksheet named "Master". I want it to open the current workbook (.foundfiles(i)), select all the data, and append it to the master workbook on the "Master" worksheet (sheet 1). The Master Worksheet in the Master Workbook needs to start out as a blank sheet ... except for the header row. I can add code to put the headers in at the start, if necessary
Sub g_CombineMultWB_AllXLSFiles()
' This Will combine all XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
'
' LOCATION OF FILES (ACTUAL):
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
Dim i As Integer
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
' Application.CutCopyMode = False ' DO I HAVE THIS HERE FOR A REASON???
On Error Resume Next
Set wbCodeBook = ThisWorkbook
Const MYFOLDER = "S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder"
With Application.FileSearch
.NewSearch
' Change path To suit.............................
I have a data set where the rows contain monthly sales data (from January to December) and the columns contain the names of employees (joe, bob, sue, etc.) and a single "group average" column:
I would like to create a chart for each employee showing the employee's monthly sales vs. group average. For example, the first chart would be for joe...
Then the next chart will be for bob and so forth...
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
I want to combine each row in column A that contains data (so stop process when the next cell is blank) into one single cell. However, each time a row is added I want it to have a new line, except for the last one. I don't know vba that well. I came up with something.
Basically I want to do this:
=A1&char(10)&A2
VBA
Dim i As Integer
i = 0
Do While Not IsEmpty(ActiveCell.Offset(0, -1))
If (i = 0) Then
ActiveCell.FormulaR1C1 = "=RC[-1]"
i = i + 1
Else
ActiveCell.FormulaR1C1 = "&CHAR(10)&R[i]C[-1]"
i = i + 1
End If
Loop
I have a column of data that will vary in length and I'm trying to write a macro to combine it all into one cell. Basically I need to do the equivalent of entering "=A1&A2&A3..." for the entire column. I started by creating an array string variable and have the data in grp() but now I'm stuck trying to figure out some sort of loop to keep adding onto the same cell or something
View 6 Replies View RelatedI have 100 columns in 1 worksheet, each column has 200 rows, I want to combine all these columns into a single column.
Therefore, Column 101 or a new worksheet Column 1, will have 20000 names.
I want to combine both an 'if' and a 'vlookup' within a single cell. So I want to say if the value in cell a1 can be found in columns c1:d100 then return a 'yes' if not return a 'no'. How do I do this
View 7 Replies View RelatedI have a sheet that I need to combine data from three cells into one and then get rid of original data.
Data to be combined:
A1=650
B1=1234567
C1=1998
D1=Desired Output
Desired Output:
A1=
B1=
C1=
D1=650-1234567-1XXX
Excel Chart can fit various trendlines in a given set of data. For example we can get linear, as well as exponential trend line for same data set.
How do I decide which trendline best represents the trend in data? Shoud R Sq be used as parameter to see the best fit?
Is it possible to produce one unique list from two, and preferably in alphabetical order, without resorting to VBA? i.e. a formula solution.
I've attached a sample.
I have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount)
I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
Sheet1
A..100
C..200
E..400
Sheet2
A..200
B..100
D..200
Sheet3
A..100..200
B.....0..100
C..200..0
D.....0..200
E..400..0
how can you combine all data from different workbooks in to one workbook. i have 544 workbooks to combine. here is a sample screenshot of the table i need to combine.
it consists of 9 columns. rows are not consistent in number and sheets are named with numbers starting from 001 to 999 ....
I'm importing some data from an HTML table into excel, it all formats pretty well except that some of the data appears on multiple rows.
A B C
1 01.02.06 John
2 Bob
3 Sam
4 02.03.06 Jim
What I need:
a b c
1 01.02.06 John, Bob, Sam 3
2 02.03.06 Jim 1
What I need to do is get all the items in the colum B which are listed under the same item in column a, in the first case John Bob and Sam and put them all into the same cell. I then want to delete the empty rows. It's important that this is done by testing to see if column A is blank, rather than using the date.
then in column C I want to count the items in column B,
ideally then repeat the script for the whole sheet.
Not a clue of the type of syntax I should be using though!
In fact there's probably a better way of importing the data from the HTML so it doesn't even need to be done this way! of course I'm oblivious to it. Auto Merged Post Until 24 Hrs Passes;Thinking maybe I didn't make myself properly clear....
If a cell in column a is empty then it means the item in column b needs adding to the end of the item in the row above in column b.
I then want to count the items in column b.
I want to combine all data in a single graphic. It must be like a coordinate system.
The file is in that address: [URL] .......
I basically need to grab all the numbers going down in a row and get them into one cell in Text format with a comma between them.
A1
5293
5294
5295
5296
5299
5300
5301
5302
5303
5304
5305
B1
What I need in Text format
5293,5294,5295……
I noticed that if I have data that trends downward a straight line trendline will suddenly create a negative vertical axis. But if my data is only positive, how would I prevent that negative vertical axis from appearing?
yer.xlsx
I've got problem with combining 3 cells into one. First cell contains text, second have date yyyy-mm-dd and last one is as previous. I'm using formula .
[Code] .....
And I'm getting: TEXT_41694_41701. How can that be corrected to use formatting for date format to get TEXT_yyyy-mm-dd_yyyy-mm-dd?
I have 2 pivot tables in an Excel Sheet (Pivot A and Pivot B). They have different structures i.e. the table headings are different. I need to sum the "Grand Total" values from each of these pivots. Can anyone explain if the following is possibe:
1. Can you combine 2 pivots with different structures in order to acheive a single Grant Total value?
2. Can I create a formula which adds the 2 separate Grand Total Values?
I need to combine around 20 columns into one single column, then I also need to insert open and close html tag for each column moved. See attachment example or information below
BULLET 1, BULLET 2, BULLET 3, BULLET 4, BULLET 5 ====> DESCRIPTION:
DESCRIPTION COLUMN
<ul>
<li>BULLET 1</li>
<li>BULLET 2</li>
<li>BULLET 3</li>
<li>BULLET 4</li>
<li>BULLET 5</li>
</ul>
How to Collate and combine lab daily assay data into a single easily manageable file.
Currently i have a spreadsheet for every days assay results. Now this should be combined into monthly and yearly data.
i am looking at creating a combine chart for 3 variables.how to achieve that?
TeamSubTeamsScore
A X 20
Y 25
B X 10
Y 20
C X 15
Y 10
Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.
NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.
Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario:
Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.
I need to add small trendlines next to some data in a score card and also working out the calculating Compounded Annual Growth Rate.
1) how do i just extract the treadline, i have created the graph but don't know how to just extract the trendline
2) is there a simple calculation on excel to work out the CAGR?
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedI have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View Related