Last Occurrence Of A Particular Value
Oct 14, 2006
I would like to lookup the last occurence of a particular cell value in a worksheet and use the cell value in the column immediately adjacent to this one in a calculation.
For example, The text "Run #" occurs several times in a sheet with a numerical value in the next column over. I would like to use the last occurence - or as far as that goes, the largest occurence of the numerical value. Unfortunately, there is additional data in between the "Run #" occurences, so a simple max() for the column will not work.
View 9 Replies
ADVERTISEMENT
Dec 24, 2013
I'm getting an export from a CDR. This export contains the date and times people log on and off from a queue. For logging in they dial 511, for logging out they dial 512. They get a voice prompt and type their password. I need to know how much time they daily spend in this queue
At first this looks pretty easy. I just make a sum of all the times they called to 511, then a sum of all time they called to 512 and finally I substract those values and I end up with the correct time spend in the queue.
The problem comes when they call multiple times to 512 without actually logging off. For example, they type the wrong password or simply hang up.
Result is this in the CDR
FROM TO DATE TIME
101 511 23/12 08:34
101 512 23/12 11:58
101 511 23/12 12:34
101 512 23/12 14:45
101 512 23/12 14:47
101 512 23/12 15:00
The actual time spend in the queue is 5 hours and 50 minutes. But Excel calculates this as 35 hours and 22 minutes, because it counts the 512 values no matter what.
How can I make sure that Excel only calculates the values of they are either the last value in the row OR if they are preceded by 511?
View 2 Replies
View Related
Jan 9, 2007
I am trying to extract the last occurence of ppp (4th column). So as long as 4th column is "ppp", i would want to extract the row wher the the last "ppp" occurence start and display in sheet2 "108-Jan-07vcdppp4". If data in 4th column is detected to be "ppp1", it would also extract the row wher the last "ppp1" occurence start and display in sheet2.
Note that the number of ocurrence is random and do not follow specific pattern. Pls see the attached for the example.
View 9 Replies
View Related
Feb 20, 2014
I have two sheets:
Sheet 1
Col A
A
B
C
D
Sheet 2
Col ACol B
AXX
BYY
AXX
AZ
DD
DD
I want to count the number of unique occurance of value in Col B in Sheet 2 as per value in Col A in sheet 1 and Sheet2.
My output result should be like following:
Result
Col ACount of col B value in Sheet 2
A2
B1
C 0
D1
View 3 Replies
View Related
May 26, 2014
I need to find out last occurrence of price (Last Date of Occurrence). Column A contains Date; Column B contains Highest Price of Equity Stock in that date. Reference price (Price we want to look up) is calculated in Cell E1, Cell E2 contains start of evaluation period (date), Cell E3 contains end of evaluation period (date). I want to find out the date on which "last" occurrence of Reference price in Column B "during the evaluation period" was found.
I have tried using array formula
{=MATCH(E1,IF(A2:A21>=E2,IF(A2:A21=E2,IF(A2:A21
View 5 Replies
View Related
Jun 13, 2002
I am trying to find a way to return an second answer for a second occurance using a VLOOKUP function. (maybe it can be done with something else?)
ex. range= A1:C3,
A1 = 40CA B1 = 30R2 C1 = TRUCK
A2 = 40CB B2 = 30A1 C2 = CAR
A3 = 40CA C2 = 30B3 C3 = TRAILER
VLOOKUP("40CA",A1:C3,3,FALSE) Returns "TRUCK"
How can I get a formula like this to return "TRAILER" the
second occurance of "40CA"?
View 9 Replies
View Related
Sep 16, 2008
[data] ....
I'm having a problem seperating the prices in Colomn H into three seperate cells C,E & G
The first figure in c is easy enough if a little long (any possible tidier solutions?)
The second Im not happy with it is clumsy using the fixed lenght figure "5"
The last I cant figure out probably because Ive done the second incorrectly!
Finally I can not see why figures apear in away team.
View 9 Replies
View Related
Feb 20, 2011
I have tried using the 'arbitrary lookup' function as listed here but can't seem to get it to work. [URL] .....
I have a list of all football fixtures and results in the premier league this season and I have a separate worksheet with a drop down menu to load each team.
What I am struggling to do is to get a function that will obtain the data corresponding to each of the home fixtures and the away fixtures of the team selected in the drop down menu.
I have managed to get the first result but do not know how to get the 2nd occurrence, the 3rd etc.
My formula for the first is
=INDEX(Fixtures!$A$3:$R$380,MATCH($E$1,Fixtures!$C$3:$C$380, FALSE),5).
I've attached the spreadsheet. (Unfortunately the format of the excel sheet can't be changed)
Forum Example.xls
View 7 Replies
View Related
May 10, 2014
I have attached the excel sheet for reference. As shown in the "After" sheet, i need the 2nd to nth instance of duplicate keywords to be highlighted with some color.
View 9 Replies
View Related
Jun 24, 2014
[URL]
Now what I need is a formula similar to the one provided in the above referenced thread; however, I need it to sum the totals of all Children (C) from column BW in the attached excel file, and return the sum values found in BW to the corresponding employee (E), before the next E occurrence, or blank, if the row below the last row containing a C value in row M in blank.
refer to the excel file, specifically the row highlighted in RED, and the explanation to the right of it, for further clarification on what I'm needing the formula to do.
Ultimately, I have a census of employees with rates, and some employees cover their children, and I'm needing a formula that will be able to total up the monthly premium for each employee's covered children, and bring that total up to the same row that the employee's data is located.
View 14 Replies
View Related
Aug 13, 2014
I have a column of data that contains a two letter identifier, which can sometimes be combined with another 2 letter indentifier: Example
Column D
AA
DC
DC,AA
How would I get countifs to count each occurrence of AA or DC by itself?
View 8 Replies
View Related
Sep 24, 2009
I have a few dozen columns of data and would like from each row to count the number of negative numbers in every 3 occurrences. E.g. in row 2 I’d want to count the negative occurences in B2, E2, H2, K2 etc. Also, I’d like to be able to count the total number of occurences along each row, again counting every 3rd occurrence, though this time both negative and positive values.
View 4 Replies
View Related
Jul 13, 2013
I am trying to find an in-cell formula to find a cell with a specific value and return the value in column A of the same row. Typically this is handled by Lookup or VLookup or HLookup. However, these only find the first occurrence of the value, I even know how to find the last occurrence, but what about in between? In my spreadsheet I have reoccurring values that I need the value in column A of the same row, but I need more than just the first or last but every instance in between. How to do this?
View 4 Replies
View Related
Apr 2, 2008
I have to calculate bonus payments for people working O/S. I have a 5 year calendar in month blocks (60 months/columns). In each month there is a percentage 'time O/S' figure.
If an employee is O/S for 3 consecutive months they get bonus 'A', 6 consective months bonus 'B', etc. How can I evaluate the 60 columns, returning the number of times 100% occurs in 3 consecutive months/columns. I have found examples of similar solutions but they will return a value of 3 if there are 5 consecutive months of 100%...
ie. 100 100 100 100 100
= 100 100 100 *** ***
& *** 100 100 100 ***
& *** *** 100 100 100
= 3
but I need it to equal 1
View 14 Replies
View Related
Mar 22, 2009
I have a table about 35,000 rows. I just sorted the table so now you can see the data by date a time of occurrence. Now there is duplicate data... like almost duplicate 1 or 2 fields are different which is ok BUT I just want to extract the first occurrence so E.G.:
765432 Data data data etc etc maybe something different here
765432 data etc maybe different here
765432 data same thing
765449 data....
765449 data...
800000 data
898427 data
898427 data etc...
OUTPUT:
765432 Data data data etc etc maybe something different here
765449 data....
800000 data
898427 data
Notice how it just took the 1st occurrence and not all... I tried Advance filter but the data is all unique so it doesnt work it takes everything... I tried recording a macro but its crazy! and I did a pivot table took the first field... tried a vlookup and thought I could drag it but its getting too complicated...
View 9 Replies
View Related
Jan 11, 2012
I have 2 sheets with a formula in sheet 2 looking to pick up information from sheet 1. the formula in sheet 2 is:
=HLOOKUP(C8,'Cost-Effort'!$B$7:$AH$42,26, FALSE)
But C8 appears in W7 and X7 in sheet 1 and will only pick up the first Occurrence and I need it to pick up the second Occurrence for this specific task.
View 6 Replies
View Related
Aug 24, 2012
Let's say I have numeric nonzero and zero data in A2:X2. How do I find the first, second, third, second-to-last, last occurrence of a nonzero or zero value. I am able to find the first nonzero value by using Match(true, A2:X20, 0) to find the relative position, and then using index to find the value. This method also works with the first zero value, but I can't seem to find how to do the second, third, nth occurrence.
View 3 Replies
View Related
Nov 12, 2013
I understand that the function FIND(find_text, within_text, start_num) will find the first occurrence of a stated string. And by adjusting the start_num, you can skip a set number of characters before the search begins.
But, is there a way to find the Last occurrence of said string? In my case the find_text string may occur multiple times in the variable length within_text cell to be searched.
Sample: Find the last occurrence of MDU
Code:
Sample string1 - ABDJ FFU MDU WWW AEH JJF MDU JJI LLK OOI HAHA QWAS
Sample string2 - HFUR MDU HDS IGH RJR KDHF LLDE MDU KKJ MDU GGG
In the above 2 sample strings the output of the Find() function needs to be 26 & 40. Having a cell formula would be desirable, but if it can only be done by VBA that is acceptable, also.
View 9 Replies
View Related
Sep 3, 2008
i want the formula to be used in excel to make acounter in another column for the values the occured repetitively
like to have these two column.
ex:
Oper No
Work Center
10 Paintsh
20 Paintsh
30 Paintsh
40 Paintsh
50 Paintsh
60
Paintsh
70 Paintsh
80 Paintsh
90 Paintsh
here the operation no is the counter for the repeated work center whose name is paint sh
View 9 Replies
View Related
Dec 2, 2008
I have an worksheet where I use sequential numbers in column B but it often happens that we insert some more rows with the same number in the B column.
Ex.:
01
02
03
04
04
04
04
05
06
06
Now we would like to have a macro that will format the text color (change to white) in columns B & D as soon as there is a second (or more) occurrence(s) of the same preceding number.
Ex.:
01 – Black (unchanged)
02 – Black (unchanged)
03 – Black (unchanged)
04 – Black (unchanged)
04 – White (changed)
04 – White (changed)
04 – White (changed)
05 – Black (unchanged)
06 – Black (unchanged)
06 – White (changed)
View 9 Replies
View Related
Jun 26, 2003
I have data across rows in which I want to find the 1st occurance of a non blank cell and return this as a reference.
The formula in col A was kindly provided by Aladin, this finds the last entry, can this be tweaked? I'll be honest and say that I dont't quite understand how it works.
Row 5 should return 2
Row 9 should return 29
View 9 Replies
View Related
Dec 13, 2006
I need to know how to create a drop down menu from a very large spreadsheet of Column A but have it only return 1 occurrance. NOT in VBA.
Example:
Column A - these are different Value Streams PMV, SMV and WRV but this will show up over 100 times each as there are many departments per Value Stream I would only like to see 1 occurrance
Column B - Is a list of departments per value stream but will have duplicate departments Example: PMV - PM9, PMV - PMA, PMV - PMB
I would like to have a drop down and be able to select from the three value streams (Column A) and it return one occurrance then the departments that correspond with the Value Stream (Column B).
View 9 Replies
View Related
Dec 29, 2006
I am using vlookup to find the ORIGIN data and DESTINATION data but the subheading is the same for both- see below(site name, city...). How do I find the second occurrence for the same heading?
Is there another command that would be better?
col A col B
Line#1ORIGIN INFO:
Line#1 CONTACT NM
Line#1 CONTACT PH#
Line#1 CONTACT EML
Line#1 SITE NAME
Line#1 ADDRESS
Line#1 CITY
Line#1 ST ZIP CTY
Line#1 DAY&WINDOW
Line#1 LIVE/DROP?
Line#1DESTIN INFO:
Line#1 CONTACT NM
Line#1 CONTACT PH#
Line#1 CONTACT EML
Line#1 SITE NAME
Line#1 ADDRESS
Line#1 CITY
Line#1 ST ZIP CTY
View 5 Replies
View Related
Apr 7, 2007
In one column, i get the ID. In the next column of the same row i get the status. My question is to find the number of occurrence of a specific ID with a specific status on another sheet. Attached worksheet sheet "count" has the source with ID at column C and status at column D. My expected result is in another sheet "expected result". I think a macro is needed, but i can't really figured out the way to do this counting.
View 5 Replies
View Related
Aug 16, 2007
Is there a way to build a formula that looks up the first record in a table that has a value of A and X? Value =A Value=X. The next formula would would then return the next record that was a value of A with a value of x that was greater than or equal to 4?
Table
1 A x
2 A
3 A x
4 A
5 A x
The 1st formula would return a value of 1.
The 2nd formula would return a value of 5.
View 3 Replies
View Related
Aug 23, 2007
I have a very very long weekly table of, say, sales regions, items sold, revenue, profitability, etc.
(Very long here means 120,000 rows, and in Excel 2007 - please don't hold this against me! )
Let's assume Row 1 and Column A are for headers. So Column B is Sales Region and Column C is Item Name. The first Sales Region, beginning in B2, let's call it "America", will repeat (B3, B4....) until the Item Names are done for that region. Then the next Region starts, "Australia", and the list of Items starts again, etc.
Not all the Items will be sold in every Region each week, and even some Regions may disappear from the table one week only to reappear a few weeks down the road. The table is Sorted alphabetically, though, first by Region, then by Item.
One way to VLOOKUP week over week information from last week's report onto this week's report is to concatenate both weeks' Region and Item information (=B2&C2) seperately, and VLOOKUP by that. This returns only combinations of Region/Item that occured in the current week, and with ISERROR, 0 for combinations that occured this week, but not last week. As far as what it returns, this is fine for our purposes but with several pieces of information to VLOOKUP (#, revenue, profit, etc.) and 120,000 rows, it takes forever. Literally over an hour to copy down the week over week parts.
I had the idea that maybe it would be faster if I could define individual VLOOKUP ranges for each Region, and then look up Item within that range. These ranges would vary in placement in the table and in numbers of rows each week, as the number of Items sold in each Region waxes and wanes, hence "dynamic ranges" - I hope I've used that term correctly.
Is there an effective, efficient way to return the row numbers of the first and last instances of a given Region, and use that range for the Item VLOOKUP?
View 9 Replies
View Related
Jul 15, 2012
The attached wb will be used to schedule 10 machines. I have a dispatch ws that will have the machine # in column A, job/lot/ assy in column B, and load hrs in column C. there is a ws for each machine number. I want the worksheets for each machine to look in the dispatch ws, and return the info from B and C that has it's number in A for every occurence, currently it will return the 1st occurrence only.
Schedule.xls
View 5 Replies
View Related
Sep 24, 2013
I'm trying to create a calendar overview of transactions from a raw data list. the result should be an amount, based on the number of occurrences of a specific transaction type at a particular date. Thus, the counter shall be based on two conditions. I've tried COUNTIF, INDEX, MATCH and VLOOKUP combined but I don't seem to "go all the way".
View 1 Replies
View Related
Feb 14, 2014
accomplish VLOOKUP for multiple instances of a same Lookup value
First let me explain about my file:-
Table~1:-
1.B2:B19 I have list of items which required to build a product
2.D2:D19 I have list of shortages against each item
3.C2:C19 I have list of dates when each item shortage will get fulfilled
Table~2:-
1.C22:C31 I have picked the largest 10 different dates from Table1 by using LARGE formula.
Against each date which is update C22:C31, respective shortage qty has to get VLOOKUPED.
When there is a same lookup value, it has to keep pick next value (Shortage Qty) for same date.
View 2 Replies
View Related
May 23, 2007
I would like to find the position of the last occurrence of a character in a string. For example, I have a string with the following:
"c:wwgpeToolbidsTest File.GP$".
I would like to find out the position of the last '' in the string because I want to pull the filename, 'Test File.GP$' into a variable. I would like to avoid writing code to do this. Are there some Excel functions I can use for this?
View 7 Replies
View Related
