When I click on the "Office Button", then in the recent "documents dialog box" there is a list of my worksheets plus an "allsenatename" file". This then downloads a worksheet from a website. I don't know how it was added to my list, I must have entered it when looking at that web site in error.
View 3 RepliesI am using Excel 2007 so I CANNOT use application.filesearch.
With that said, I need to change one of my old macros that searched for the newest file within a specified folder, and then display the name of that file in a message box that gives the person an option of opening the file. I've read too many workarounds for application.filesearch and I'm not sure how to combine them all into something I can use.
Normally I have a bit of code to start with, but this one has me so baffled I don't know where to start.
I put together some code which at the end of it I am wanting to show in cell D1 the creation date for the most recently created file found.
View 5 Replies View RelatedI've got this code that will copy data into my worksheet from the most recent .IRP file generated on my C:/ drive. Along with copying the data to my worksheet, I'd like to have a copy of the IRP file copied to a folder on my L:/Drive.
In the code section I've commented out the code that allows the data from the most recent file to be copied to my worksheet. I found code that supposedly will copy a file to a new directory. I want to combine this into my code to allow both to happen. Here's my attempt.
I am using the code below to Open the most recent file in a folder.But once it Identifies the most recent file I get a run time error"1004"
xxxxxxxxxxxxx(name of File) could't be found.At line "Wookbooks.Open strFilename".My question is , why can't it open it, it has the location and the file name?
This code works as long as the macro and target file are in the same directory(Folder)
I have a macro-enabled template file in Excel 2007. I would like the user to be unable to save in any format other than macro-enabled. They should be free to choose a path and filename, but not the file type.
I presume this means some VBA code in the before save event, but I don't know what.
I was wondering if anyone had any code to loop through every file in a folder and list the file name along with every sheet name in that file? I'm using Excel 2007.
View 4 Replies View RelatedI have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):
Macro 1: clears order
Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.
It's the Macro 2 I want to edit.
I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.
Row 1 to 11 includes standard order info and Macro buttons.
Row 11 includes the heading for order data.
For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.
The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)
File and Folder info:
To simplify suggestions, the following file and path info can be used (I can change to the correct later):
Template file name: template_order.xlsm
Template file location: \servershared emplate
Total list file name: total_list.xlsx
Total list file location: \servershared otal
Selection info:
The template file exists of a "general order info area" A1:N10
The column heading for order data is located at A11:N11
The selection to be copied is A12:N550 - But only rows where column A includes data (not empty).
(If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).
When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.
I am trying to create a script for a manually morning process that I need to complete that entials downloading a number of .PDF files and sending them out to a distribution list. I am unable to automate that actual saving of the files onto the network drive, but I believe I can automate the process of attaching them to the email. I have run across some problems so far though, this is what I have been able to come up with. After doing a bit of research it seems as though using cmd would be the best way to locate and attach the file but I am still unable to get it to run properly:
Code:
Sub AttachMultiple()
With CreateObject("Outlook.Application").CreateItem(0)
.To = "test@gmail.com"
.Subject = "Test"
.Attachments.Add Split(CreateObject("wscript.shell").exec("cmd /c Dir 'G:Client ReportingMGIDaily
ReportsAGFAJune 2013*.pdf' /b /o-d").stdout.readall, vbCrLf)(0)
.Send
End With
End Sub
Here is an example of a folder I will be trying to pull the most recent saved PDF from, there are about 10 similar folders:
I feel like I am relatively close to completely this, my cmd syntax may just be a little off.
Is it possible to set the default page to open when clicking the file button? In particular, I use the recents feature a lot but never have I looked at the information on the information page. Everytime I click the file button I have to then select recents which is annoying.
View 5 Replies View Relatedloop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
Got a slight problem; I am making a "worker-plan", where you should be able to write a name on one file and have it updated (removed) from the equivalent columns on another file automatically. Here's an example with two separate projects:
Project 1 before and after changes:
Attachment 257366
Attachment 257367
Project 2 before and after changes:
Attachment 257368
Attachment 257369
You can see here how I intended it to work. When one worker is moved from Project 1 to Project 2, that worker should also be removed from those weeks in Project 1. The previous worker from Project 2 should also be removed from those weeks (in Project 2).
Are there any formulas that can make this work automatically? All week numbers will belong to the same columns in all files.
Edit: There are 30 files that should be syncronized, not just two.. I could also gather all files into one file with sheets, instead of having seperate files.
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies View RelatedI would like to email an Excel file without the macros so the end recipients will only see the data and not be confused or excited about the prompt to enable/disable macros.
View 2 Replies View RelatedI'm trying to write to text file a HTML page that is in string variable sFullPage.
So far my code is like this:
Sub wrtHTML()
Dim sFName As String ' Path and name of text file
Dim iFNumber As Integer ' File Number
sFName = "c: est.html"
'Get an unused file number
iFNumber = FreeFile
'Create new file or overwrite existing file
Open sFName For Output As #iFNumber
'Write data to file....
How do I remove those first and last two marks (a double quote on each side + square mark from the end)? Do I use somehow wrong data types or wrong printing methods?
Remove Illegal Characters From File Name ...
View 5 Replies View RelatedI am importing a csv file and each field in this file is imported with an apostrophe
eg: '01
I need to remove the apostrophes but leave the information as text thereby keeping my leading 0's
have tried formatting as text
data text to columns
nothing I do works.
I need to clean out unnecessary data from a file, (see attached text file), I'm not sure how to go about this in excel. basically every file starts with 9 cells that needs to be deleted, two cells of real data then one with garbage that needs to be deleted, it goes like that for 40 cells, then again 10 cells of garbage that needs to be deleted, then 40 of real data and goes like that up to 3000 lines, I know it sounds confusing but if you take a look at attached file, at the end I need to have
all cells full of data
I have a comma delineated text file that is full of stock item details such as stock code, description, 3 different prices etc it is about 15 fields wide by about 400 rows down. I need to be able to import all rows but only certain columns into an excel worksheet using vba. I know I can easily just rename it to .xls or .csv or something like that but its a text file we export out of our system at work and we need to be able to give it to customers who then can import into this excel spreadsheet/calculator I am creating.
The file looks something like this:
"String 1", ""String 2", "String 3", "String 4", ...... all the way up to 15
There is 400 or so rows (which represent stock items)
Now I need to copy all rows in column 1 (string 1) all rows in column 12, 13, 14, 15 (This is the only data I need from the text file in this particular spreadsheet/calculator)
I have it working fine reading the entire row in one at a time splitting it up into a string array using the Split() function and then only copies the certain array indexes i need into the worksheet here is the code for this: ...
I have a excel 2003 template that loads a csv file and create a graph.What I am trying to do is remove the Workbook_open macro after it has been run so when they save the file it will not save the macro in the new file.
View 3 Replies View RelatedI have 800+ files the problem is that the file name ends in 80 different combination so I need to try all of those for each file.
eg: one of the 800 is "109 st no 103 av" the file could be called:
"109 st no 103 av nb1_cleaned.xls" or
"109 st no 103 av nb 1_cleaned.xls" or
"109 st no 103 av nb 1._cleaned.xls" or
"109 st no 103 av sb1_cleaned.xls"
.
.
.
.etc
I wrote a code to try all those combinations, the issue lies a space the code adds before _cleaned, how to remove it?.
So the name should be
"109 st no 103 av nb1_cleaned.xls"
but my code is letting it be
109 st no 103 av nb1 _cleaned.xls
Where the variable Ord is the "1" after nb.
Find the code below:
[Code] ....
I have a few text files and i want to import them into excel using VBA. I am herewith attaching the sample text file and the desired output file.
View 14 Replies View RelatedI realise this is not strictly an excel question but it forms part of my VBA code within excel
I have been writing a VBA program (with some fantastic help from you guys) part of which writes to a batch file to rename files stored in a given folder. Unfortunately this fails if the original files have spaces in the filenames. The batch file contains command lines such as: ...
Is there a way to remove the option to open a file as read only when the file is already open by another user? Ideally when a user tries to open a file that is already in use they would get a message to that effect and the only option at that point would be for them to select "notify" when file is available.
View 8 Replies View RelatedI'm trying to load the following XML file in Excel 2007 (from Excel 2007 VBA Programmmer's Reference) and get the error "Strict Parse Error" when I do so.
View 3 Replies View RelatedI've had my Excel 2007 set up for the longest time to show the 30 most recent files when clicking on the office button. After changing it to 50 the office menu in Excel runs off the bottom of the screen and I can no longer get ot the options at the bottom to change it back. Does anyone know the registry key to modify this setting back to the 30 that allowed the full menu to be visible?
View 2 Replies View RelatedHere's an example of what my data looks like, in reality there's 1000's of rows and 100 columns...
[Code] ........
So, what I'm after is the most recent date on which a user goes over 2000. I've populated column I manually with what the value *should* be, I just can't figure out how to do this with a formula.
Using Excel 2007, have attached the sample data as an xlsx too.
I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?
i have a Macro, its creating unwanted inverted commas at the start and end of the File.
File:
"SunilManual|123456790|DrivingLicence|908567543|Sunil|Manchan
|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|w|ww|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|55|55||4|SR-1161||1234567890"
Expected File:
|SunilManual|123456790|DrivingLicence|908567543|Sunil|Manchan
|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|w|ww|w|w|w|w|w|w|w|w|w|w
|w|w|w|w|w|w|w|w|w|w|55|55||4|SR-1161||1234567890|
VBA:
Option Explicit
Sub txtt_export()
Dim buf As String, col As Long, r As Long, ws As Worksheet
[Code]....
I am running a DOS command to create a directory listing of ONLY DIR files with the short dos filenames and the long filenames. The command used is
DIR /A:D /X /N /S > c:sampledata.txt
Once read into excel, I simply want to have a spreadsheet with the following:
Directory Path Name, DIR Short Name, DIR Long Name
Anyone have some code to already do this? I have attached the sampledata.txt file to go with the pseudo code.