3-D Formula Syntax: Consolidate Certains Cells In 30 Identical Worksheets In A Workbook
Jun 7, 2006
I want to consolidate certains cells in 30 identical worksheets in a workbook. I understood that if I use the 3-D formula method, that I could insert new identical worksheets into the range of worksheets and the consolidated totals would update. Is that correct?
I cannot seem to get the syntax to work. When I read the Excel Help file it gives an example of =sum(sheet2:sheet7!B3) but I don't understand how Excel could answer this ( if the worksheets were named Sheet2,sheet3,sheet4 etc up to sheet7)
In my example, the formula is clearly wrong. Why does it not use the single quotation marks '? I cannot find references to the proper syntax anywhere. I have your training program but this does not spell it out for me either. If I use Data>Consolidate then I have to labouriously do this for each cell that I want to consolidate.
I am creating one big workbook with several different worksheets. I need to make the first two columns of every worksheet identical.
I would like to make it so that when an item is changed in any cell in any column on any worksheet, the other worksheets automatically change to become identical.
I think this needs a For Each loop, but I am stuck on how to get it accompished. In the folder I will have about 26 workbooks with all different titles, but the beggining is always the same for the workbook and the worksheet (Bldg). There will be only one ws per wb and the wb I am using to collect all of the worksheets is Final.xls. The code attached works fine, but the only way right now I know how to capture the next wb/ws is with a call.
l need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
I am trying to write a sum formula using Indirect so that the end-user can enter the names of the sheets in B1 & B2 (the values are always in cell F5 on each sheet). I thought this would work but it is throwing a REF# error.
I have the following code, which executes just fine:
[Code].....
The problem is that I need to run this again in a different column, and the data is held in another sheet that I have given the variable StepTwo to.
I'm not sure of the syntax to do this. Basically - this is what I need the code to do:
[Code] ....
Understandably this is totally incorrect, but it's the best I can do to explain what I'm actually trying to do....
The two parts of SUMIF are both held in a workbook that I've given the variable "StepTwo" to. Both sets of data are also held on Sheet(1) of that workbook.
I would like a formula which will look at a range of cells, for instance a2:g2 and count how many of the cells contents are the same. The cells contain a combination of text and numbers.
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
I am trying to use code here to facilitate "cascading" comboboxes. However, my comboboxes are in a worksheet, not a userform and I am unsure which bits of the syntax are incorrect.
Currently I am stuck at " . . . . . For I = nr + 1 To N Controls("ComboBox" & I).Clear . . . . "
The error message tells me that "Sub or Function not defined."
I think (??) the Controls function relates to User Forms, not activex and worksheets, but I don't know what to replace it with or how to alter the syntax.
I'm trying to optimize code by avoiding activating other worksheets, but I'm running into a problem with a match function.
I'm using a workbook called "Template" and then opening another workbook called "DCP" and trying to use the match function to figure out what row data is on. I can get this first line of code to work:
HTML Code: MatchedRowNumber = WorksheetFunction.Match(Combo, Sheets("Sheet1").Range("A:A"), 0)
However for that to work, I have to activate the other workbook. I want to avoid that and stay within the "Template" workbook. I think I need something like this:
HTML Code: MatchedRowNumber = WorksheetFunction.Match(Combo, DCP.Sheets(DCPSheet).Range("A:A"), 0)
That one however doesn't work... looks like I have the wrong syntax.
Below is an excerpt for the code in case something is wrong with how I set the variables.
I have attempted to code a "capture" worksheet that will consolidate other worksheets into an importable template. The problem i'm having is when I run my code I beleive it is referenceing the capture page, instead of the other worksheets. I know there are a few ways to accomplish this, one being to reference the other pages through name or location. This will not work as the other sheet names and locations will change, the only constant is the page where all will be consolidated "change capture".
I beleive it is misreferencing as it points to a being 256, and b being 0... both should have different values.
I would like the capture page to consolidate downwards (begin the second paste after the last line of the previous paste).
I need some VBA to consolidate multiple worksheets into one (a 'master' worksheet). I do not have the data to hand. But I have been told every tab has identical columns but with varying number of rows. Also, please note that the data we are interested in starts a cell A15 on each tab.
I am wondering if Excel can consolidate data from 6 worksheets found in 6 different workbooks and consolidate them into a "master" workbook. Here is a sample of 2 worksheets, but again, there will be 6 in total:
Workbook Name = CC 0038 Worksheet Name = Monthly Results
Column A = Acct # Column B = Acct Description Column C = Actual Column D = Budget
I'm using a workbook containing a worksheet for each month of the year. I want to consolidate all the data from the different worksheets into one worksheet to enable data manipulation by means of a pivot table. Updates in the individual worksheets must be automatically updated in the consolidated worksheet.
I have attached a sample workbook to show my layout.
I need to link multiple sheets (but not all, just certain ones) to one "master sheet". More specifically I need to link only certain colums from each certain sheet. The sub sheets have detailed information, but I only want basic information on the master sheet like FirstName, LastName, Ext, Buyer#, etc Not every column from the certain sheets is needed.
I need a way to update this master sheet when I update the sub sheets manually. So if I add a employee record to a sub sheet, the master sheet is updated. These updates aren't often, so running a macro to rebuild the master sheet after I manually delete it wouldn't be out of the question, whatever is convienent.
In the attached worksheet, I believe there is a sheet called Items. I don't need any information from that sheet at all to be on the master sheet so it can't be in the array when the master sheet it built from the sub sheets.
I have around 10 worksheets containing a time sheet in each. In each sheet from cell A8 to A39 project nos. are entered for each day. I need to consolidate the total hours for each project. For this first I need to list out the project nos. from all the time sheets. Is there a way to do this by some formulas?
I have attached a sample. Kindly have a look at it. I have used a macro(taken from the forum) to protect all worksheets. Please press ctrl+shft+P and click OK to protect/unprotect the sheets. No password.
I have several sheets in a workbook.. i need a macro that can consolidate/copy (an exact copy, word for word, number for number) all the data in these worksheets in one master sheet. however some of the sheets are still incomplete, thus i need the excel to update the master sheet whenever there are new data inserted (to any of the worksheet).
I have several worksheets in one workbook. To consolidate, I am copying the information from the worksheets into one summary sheet. The worksheet information is entered vertically:
I want the information in the columns to be transposed on the summary sheet, but still linked to the original worksheet: 2007 Inpatient Outpatient 2006 Inpatient Outpatient 30000 32000 25000 21000
Copy and paste special with transpose does not link the spreadsheet. I tried to drag across after filling one cell, but the fill function increases by column from left to right, not row number. (It increases row number, which is what I need, only dragging down.)
I am trying to create one giant pivot table from 3 different tables. I have been playing around with power pivot but can't create any relationships since my data is duplicated or something. I have three tables, each of which have a few columns that are the same- date, account, description and amount. The three tables are comprised of 3 bank statements from Mar-Oct. What I want to do is basically pivot the three tables so that I can list account by date for all of the entries in the 3 tables, however each of my tables may have duplicate dates such as:
Table 2 DateDate DetailCB AccountTranslation Transaction 2012.042012.04.02NOT DETERMINEDTO BE CONFIRMED WITH LUCIANA - INVESTMENT IN (649.63) 2012.042012.04.0312030RECEIVED FROM SUPPLIER 78.84 2012.042012.04.03NETTRANSFER CHECKING TO CORPORATE CHECKING (100.00) 2012.042012.04.03NETTRANSFER FROM INVESTMENTS 250.00 2012.042012.04.0412030RECEIVED FROM SUPPLIER 17.68 2012.042012.04.0512030RECEIVED FROM SUPPLIER 337.90
Is there a way for me to connect these two tables so that I can pivot by 2012.04 and show the sums of transactions by CB Account?
I have a workbook with 7 different worksheets (site_worksheets) containing data about various sites. I need to copy all this data into a single worksheet (worksheet_a). I want worksheet_a to update itself when another row of data is added to any of the site_worksheets.
I am trying to take a workbook with 10 worksheets and have the contents copied and pasted into a new worksheet without any extra blank rows onto a new spreadsheet. Does anyone know how to achieve this? The purpose is to copy the information off each of the 10 worksheets and be able to use the consolidated information for pivot tables.
Important Facts:
- Each worksheet starts with data in cell A7 and ends at BL7
- The number of rows on each worksheet is inconsistent (e.g. one sheet ends at row 12 another at row 101)
I have a worksheet that was created by converting a pdf file of 40 pages or so. The conversion process created 40 separate worksheets in one workbook. I would like to consolidate all the data on to 1 large worksheet.
I used a Macro from here that creates one worksheet from several then prints and deletes it. However the Macro doesn't carry over my column/row size formats. Is there a fix?
I've been trying to bend my mind on how to accomplish this and haven't found a clear way to do this. I have to combine reports from a varying amount of one worksheet workbooks that are all formatted the same and have the same data format in the same cells. I was originally thinking about creating some quick code like
'for when I need to sum activecell.formula = Workbook1.range(“b2”) + workbook2.range(“b2”) + workbook3.range(“b2”) 'and for when i need to create averages activecell.formula = "=average(Workbook1.range(“b2”), workbook2.range(“b2”), workbook3.range(“b2”)
However, the amount of workbooks will change depending on which regional account I'm working on, so I have no 'set amounts' of sheets. it can be anywhere from 3 to 300 (figuratively speaking). Is there a way for me to create something that will be flexible enough to expand the amount of workbooks I need to consolidate into 1 final report that totals them together? or am I going about this totally wrong?
What I am attempting to do is take data from two columns on multiple sheets within the same workbook file and consolidate them using a macro. (End result would be a sum of the numbers associated with the adjacent name calculated using all the sheets data--as some names would appear on other sheets as well).
The first column is a list of names and the second is a list of numbers. I have titled the columns the same on each sheet and placed them in the same location. However, the number of rows of data each sheet contains will vary per sheet. (For example: one sheet might have 10 rows of names while the next might have 15 or so). Also, each time this file is to be used, there might be a differing number of sheets, as users add or remove a sheet.
Is it possible to create a macro that can scan the all the varying sheets's data and output a consolidation?
I have been able to create both a pivot table and use the consolidation feature by selecting the date ranges manually, but I am lost on how to automate this for other users that have very little excel knowledge.
I've uploaded an example file in case my explanation isn't clear.
I am writing a database for a construction site to monitor all the goods that come in and what apartment Blocks they end up in.
I have three worksheets from different areas of the site. They are simply lists of items coming in and are getting longer everyday. They are all in the same format and have the same column headings. Two of which are date and Location. The location will be Block A to Block G. I want to merge the 3 worksheets into 1 and be organised by date order so that I can then duplicate that worksheet for each Block and filter using the Location Column. The 3worksheets have data manually inputted each day and I would like the merged worksheets to update automatically.
I try to transfer a data from multiple worksheet in a same 2 identical workbook. One I keep for me and the other one will be update by the user. So I need the data update by the user can be transfer to my workbook and only the new data not the one that already in my workbook. I try with the code below but it seem not working. The code run but nothing being transfer.
I have about 50 tabs one for each city and i need to update information everyday for each of those cities. I now what the macro to update all the new entries in each of the worksheets into a consolidated Summary sheet. This is dynamic so if 10 rows are filled in the summary tab and if i update the rows in the individual city worksheets the summary tab should paste values from the 11th row and so on
