I have a workbook with 7 different worksheets (site_worksheets) containing data about various sites. I need to copy all this data into a single worksheet (worksheet_a). I want worksheet_a to update itself when another row of data is added to any of the site_worksheets.
View 12 Replies
I have a worksheet that was created by converting a pdf file of 40 pages or so. The conversion process created 40 separate worksheets in one workbook. I would like to consolidate all the data on to 1 large worksheet.
View 9 Replies View RelatedI need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
I have a workbook composed of many worksheets with varying names. Of the 40 or so worksheets, 25 of them contain data that I need to copy and consolidate into a master summary sheet within the same workbook. All of the sheets I need to grab data from have a worksheet name that ends in “(Data)”. All worksheets contain data that starts on the same row (row 8) but the number of rows of data will change daily. When I copy the data range on the individual sheets I do not want to copy the header row. I’ve tried various uses of the offset command with no luck to resize the selected range. I’ve also tried giving each range a named Dynamic Range and referring to this name in VBA code but that didn’t get me very far either. So the flow looks something like this:
1. Find all sheets with name ending in “(Data)” (i.e. “Project X (Data)”)
2.For each sheet found, find the data range and omit the first row of data.
3.Copy selected range.
4.Go to sheet “Master” and find the last row of data. Move down one row to the first empty row and paste copied range.
5.Go to next sheet and repeat.
I have a workbook that has multiple tabs and need help trying to figure out how to consolidate all the data. I find myself spending hours doing this manually each day.
Here is what I have:
Workbook has tabs labeled....Wk1_Mon, Wk1_Tues, Wk1_Wed, Wk1_Thurs, Wk1_Friday, Wk1_Summary......and repeats all the tabs through Wk5....then I have a Month_Summary tab.
I have 25 users with 25 seperate workbooks each with individual information on each workbook.
I am trying to get a sum of all the data on the Month_Summary tab for each month for each user and as well as a sum of the Month_Summary tab for all 25 users.
The end result I am looking for is to get a Yearly Sum of all the Month_Summary Tabs for all 25 users as well as individual yearly summaries for each users.
I have one main Folder which contains 25 folders (one for each user). Under each user folder there is a seperate Workbook for each month.
I have attempted to code a "capture" worksheet that will consolidate other worksheets into an importable template. The problem i'm having is when I run my code I beleive it is referenceing the capture page, instead of the other worksheets. I know there are a few ways to accomplish this, one being to reference the other pages through name or location. This will not work as the other sheet names and locations will change, the only constant is the page where all will be consolidated "change capture".
I beleive it is misreferencing as it points to a being 256, and b being 0... both should have different values.
I would like the capture page to consolidate downwards (begin the second paste after the last line of the previous paste).
I need some VBA to consolidate multiple worksheets into one (a 'master' worksheet). I do not have the data to hand. But I have been told every tab has identical columns but with varying number of rows. Also, please note that the data we are interested in starts a cell A15 on each tab.
View 3 Replies View RelatedI have several sheets in a workbook.. i need a macro that can consolidate/copy (an exact copy, word for word, number for number) all the data in these worksheets in one master sheet. however some of the sheets are still incomplete, thus i need the excel to update the master sheet whenever there are new data inserted (to any of the worksheet).
View 3 Replies View RelatedI am trying to create one giant pivot table from 3 different tables. I have been playing around with power pivot but can't create any relationships since my data is duplicated or something. I have three tables, each of which have a few columns that are the same- date, account, description and amount. The three tables are comprised of 3 bank statements from Mar-Oct. What I want to do is basically pivot the three tables so that I can list account by date for all of the entries in the 3 tables, however each of my tables may have duplicate dates such as:
Table 1
DateDate DetailCB AccountTranslationTransaction
2012.042012.04.02IN TRANSITFunds to be released(211.41)
2012.042012.04.02NETAutomatic investment(7,164.27)
2012.042012.04.0212030Client Payment211.41
2012.042012.04.0212030credit card receivable (Cielo)1,684.00
2012.042012.04.0212030credit card receivable (Cielo)1,862.26
2012.042012.04.02N/Aavailable balance0.00
Table 2
DateDate DetailCB AccountTranslation Transaction
2012.042012.04.02NOT DETERMINEDTO BE CONFIRMED WITH LUCIANA - INVESTMENT IN (649.63)
2012.042012.04.0312030RECEIVED FROM SUPPLIER 78.84
2012.042012.04.03NETTRANSFER CHECKING TO CORPORATE CHECKING (100.00)
2012.042012.04.03NETTRANSFER FROM INVESTMENTS 250.00
2012.042012.04.0412030RECEIVED FROM SUPPLIER 17.68
2012.042012.04.0512030RECEIVED FROM SUPPLIER 337.90
Is there a way for me to connect these two tables so that I can pivot by 2012.04 and show the sums of transactions by CB Account?
What I am attempting to do is take data from two columns on multiple sheets within the same workbook file and consolidate them using a macro. (End result would be a sum of the numbers associated with the adjacent name calculated using all the sheets data--as some names would appear on other sheets as well).
The first column is a list of names and the second is a list of numbers. I have titled the columns the same on each sheet and placed them in the same location. However, the number of rows of data each sheet contains will vary per sheet. (For example: one sheet might have 10 rows of names while the next might have 15 or so). Also, each time this file is to be used, there might be a differing number of sheets, as users add or remove a sheet.
Is it possible to create a macro that can scan the all the varying sheets's data and output a consolidation?
I have been able to create both a pivot table and use the consolidation feature by selecting the date ranges manually, but I am lost on how to automate this for other users that have very little excel knowledge.
I've uploaded an example file in case my explanation isn't clear.
I am writing a database for a construction site to monitor all the goods that come in and what apartment Blocks they end up in.
I have three worksheets from different areas of the site. They are simply lists of items coming in and are getting longer everyday. They are all in the same format and have the same column headings. Two of which are date and Location. The location will be Block A to Block G. I want to merge the 3 worksheets into 1 and be organised by date order so that I can then duplicate that worksheet for each Block and filter using the Location Column. The 3worksheets have data manually inputted each day and I would like the merged worksheets to update automatically.
I have about 50 tabs one for each city and i need to update information everyday for each of those cities. I now what the macro to update all the new entries in each of the worksheets into a consolidated Summary sheet. This is dynamic so if 10 rows are filled in the summary tab and if i update the rows in the individual city worksheets the summary tab should paste values from the 11th row and so on
View 14 Replies View RelatedI am trying to consolidate information from multiple (atleast two or more) worksheets (in the same workbook) into a single sheet.
The worksheets have identical column headings. There are 4 columns in each worksheet. The first three columns are text strings (and some cell in these columns may be blank). The fourth column is an integer. The number of rows in each worksheet is most likely to vary. Within a worksheet the rows are unique. However, some rows may be duplicated across worksheets.
To reiterate, here's what I am trying to do.
Step 1. Create a summary sheet.
Step 2. When there is a unique row (identified by the first three cells in that row) across worksheets then I have that row as is in my summary sheet.
Step 3. When there are duplicate rows (identified by the first three cells in that row) across worksheets, I want to add up the cell in the fourth column associated with those row in my summary sheet
I have tried union (works only within a sheet), consolidate (works only with a single column). I don't need the sophistication of a pivot table but simply an aggregation of data
I am trying to do this using macros (within an add-in)
I have enclosed a sample workbook with the expected output. I created this workbook by hand in an attempt to clarify my problem statement.
I have a workbook that has several sheets in it with various rows of data on each sheet. I would like to have a macro to loop through all the sheets in the workbook and copy and paste the rows into a new summary sheet. The rows to be copied should only have data in Column A, in other words if Column A of a row is blank I want it skipped. Also Row 1 of every sheet contains my headers, and I am only using columns A through M. It needs to be able to copy rows even when autofilter is in use.
View 13 Replies View RelatedI have a workbook with 4 sheets and with sheet 5 as a "consolidated" sheet. I have to create the macro, which will on a daily basis copy the populated data from those 4 sheets and paste into the sheet 5 (same workbook). The data in the Sheet 5 should be pasted from row 2 below each other.. Row 1 will be the headings and shouldn't be replaced. The data in all 4 sheets should be copied from row starting 37, columns C to BA but it will end with different row numbers. note that columns A & B are populated but shouldn't be copied.
View 7 Replies View Relatedl need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
View 9 Replies View RelatedI have attached a sample workbook to show my layout.
I need to link multiple sheets (but not all, just certain ones) to one "master sheet". More specifically I need to link only certain colums from each certain sheet. The sub sheets have detailed information, but I only want basic information on the master sheet like FirstName, LastName, Ext, Buyer#, etc Not every column from the certain sheets is needed.
I need a way to update this master sheet when I update the sub sheets manually. So if I add a employee record to a sub sheet, the master sheet is updated. These updates aren't often, so running a macro to rebuild the master sheet after I manually delete it wouldn't be out of the question, whatever is convienent.
In the attached worksheet, I believe there is a sheet called Items. I don't need any information from that sheet at all to be on the master sheet so it can't be in the array when the master sheet it built from the sub sheets.
I am trying to take a workbook with 10 worksheets and have the contents copied and pasted into a new worksheet without any extra blank rows onto a new spreadsheet. Does anyone know how to achieve this? The purpose is to copy the information off each of the 10 worksheets and be able to use the consolidated information for pivot tables.
Important Facts:
- Each worksheet starts with data in cell A7 and ends at BL7
- The number of rows on each worksheet is inconsistent (e.g. one sheet ends at row 12 another at row 101)
- The columns have uniform titles and data below
how to consolidate all data from all worksheets into a single worksheet(master sheet)?
Untitled.png
In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.
consolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
Project Submissions.xlsx
I have the following macro, however I am struggling to make it work on my file:
[Code] .....
I have attached my sample. essentially i have the dec, jan etc month tabs to consolidate into the summary sheet. i would like the data to be dumped from both sheets into the summary sheets. i will be adding a feb, march, april etc tabs as the year progresses.
I would also like column A in the summary sheet to repeat the name of the sheet the data is being retrieved from.
Attached File : sample macro_issue01.xlsm
I imagine my goal could be achieved via some scripting code, but, alas, I don't do vbs. Here's the situation:
I have a spreadsheet generated by another office which lists individuals' names and information about participation in various programs. Each line lists name, address, program title and amount. The next line may be the same name, address with a different program and amount. Each person may have 4-5 entries. I want to make single entries for each individual, with colums showing the programs and amounts.
Current:
ID Name Address Program Amount
1 Bob home A 25
1 Bob home B 37
2 Dave home A 22
2 Dave home B 10
2 Dave home C 21
Need:
ID Name Address Program A Program B Program C
1 Bob home 25 37 0
2 Dave home 22 10 21
Hopefully this makes it a bit more clear. The only way I know how to accomplish this is the "old fashioned" long hand approach of cut & paste. There are several thousand individuals, with (currently) tens of thousands of rows.
I have been working on this project for some time and still haven't got anywhere with it. What I am essentially trying to do is create a master summary workbook where by you press a button to activate a chunk of VBA that will grab the same range of data from multiple workbooks but also multiple sheets in those workbooks, only problem is the number of sheets in each workbook are constantly changing so I need first find some way of accessing a closed workbooks, then I need a way of looping through a segment of code that will look into approximately 10 workbooks all with a different number of sheets and taking a fixed range of cells out of each sheet and for every workbook make a new tab and paste the information in that tab then move onto the next workbook, find the number of tabs (missing out the first 3 tabs of every workbook) and copy and paste the fixed range from each tab onto a new tab the summary workbook.
I will then have a summary workbook with a number of tabs, each one a different workbook with all the data from all the tabs in that workbook, I can then pull that information using formulas or some more VBA into a summary tab on the summary workbook, consolidating all of the information.
I was searching through the internet to look for some help with regards to consolidating data from multiple workbooks from different directories into a single worksheet called Summary.
I would like to copy the entire worksheet from different workbooks in different directories into this workbook I like to call Summary. To manually do it I have to open the workbook I want to copy the worksheet from. Right click on the tab and select Move or Copy, select the sheet I want to copy and select the workbook I want to copy this sheet to. Repeat this process for all the workbooks.
The next step is to copy and paste from these sheets into a main summary sheet. The data range from these sheets are starting from row 13 onwards and they may be of different size between Column A to Column W.
For example the workbooks are coming from :
S:Area 1West.xls from worksheet Andy
S:Area 1East.xls from worksheet Bill
S:Area 1North.xls from worksheet John
S:Area 1North.xls from worksheet Albert etc...
writing a macro that could save me loads of time. In the attached file there are 2 separate sheets of data ( named "Elements Innovation" and "Dinttap") that I need copied, pasted, transposed and consolidated into one master sheet (named "Desired result"). Note that the fields that relevant cells are highlighted in yellow. In reality I'll have many (~100) of these sheets that I need the data extracted from, and the work looks like it can be automated using VBA to speed things up.
View 2 Replies View RelatedI have 2 nearly identical workbooks and I need to update historical data from the old workbook into the newer one.
My current Coding Snippets that I want to use look like the following:
Code:
Sub UpdateWorkbook()
Dim ws As Worksheet
Dim r1 As String
Dim r2 As String
Dim r3 As String
Dim r4 As String
Dim r5 As String
Dim r6 As String
[code]....
Now, this code isn't working I suspect because the Copy and PasteSpecial Functions don't work the way I wish to.
I am wondering if Excel can consolidate data from 6 worksheets found in 6 different workbooks and consolidate them into a "master" workbook. Here is a sample of 2 worksheets, but again, there will be 6 in total:
Workbook Name = CC 0038
Worksheet Name = Monthly Results
Column A = Acct #
Column B = Acct Description
Column C = Actual
Column D = Budget
Acct # Acct Description Actual Budget
589800Salary-Related Benefits4,808 5,498 589803HO Employee Benefits2,055 2,055 589632Recognition Award0 83 561605Furn/Equip/Alterations0 308 568010Telecom (Local Access)0 250 568041Telecom (Telephone & Fax)0 42 568042Telecom (Wireless)546 473 583402Printing/Stationery IDB0 250 584200Office Stationery/Supplies28 129 560000Travel Costs0 440 ..................
I'm using a workbook containing a worksheet for each month of the year. I want to consolidate all the data from the different worksheets into one worksheet to enable data manipulation by means of a pivot table. Updates in the individual worksheets must be automatically updated in the consolidated worksheet.
View 4 Replies View RelatedI have around 10 worksheets containing a time sheet in each. In each sheet from cell A8 to A39 project nos. are entered for each day. I need to consolidate the total hours for each project. For this first I need to list out the project nos. from all the time sheets. Is there a way to do this by some formulas?
I have attached a sample. Kindly have a look at it. I have used a macro(taken from the forum) to protect all worksheets. Please press ctrl+shft+P and click OK to protect/unprotect the sheets. No password.
I have several worksheets in one workbook. To consolidate, I am copying the information from the worksheets into one summary sheet. The worksheet information is entered vertically:
Charges 2007 2006
Inpatient 30000 25000
Outpatient 32000 21000
I want the information in the columns to be transposed on the summary sheet, but still linked to the original worksheet:
2007 Inpatient Outpatient 2006 Inpatient Outpatient
30000 32000 25000 21000
Copy and paste special with transpose does not link the spreadsheet. I tried to drag across after filling one cell, but the fill function increases by column from left to right, not row number. (It increases row number, which is what I need, only dragging down.)
