AUTOMATIC CALCULATE VALUES

Feb 14, 2007

I have a list where i enter invoice values lets say on column (A:A)
and i want to calculate all the invoice values each time i enter the values on A:A
for example;
i entered $2500 on cell A1 and pressed enter,
then i entered another figure on A1 let say $500 i want the total value to be shown such as $3000

View 9 Replies


ADVERTISEMENT

Manually Calculate Single Worksheet Of Automatic Workbook?

Oct 3, 2013

I have a workbook with about 34 worksheets (one for every day plus a few extras). I have a summary sheet which collates all the data from each other worksheet. I have required a "MAX IF" type array formula on this summary sheet which slows everything down.

Is it possible to have the whole workbook in automatic calculation, but set the 'Summary' sheet to manual calculation when I press F9 or click on a button?

View 4 Replies View Related

Automatic Copy Of Values From One Sheet To Other Sheets

Aug 9, 2013

I am trying to make some sheets with football teams from one championship and their results. For example i will have a match between TeamA vs. TeamB that will end 0-0. I will enter this value in the sheet for the TeamA results but normally this value will also be found in the results sheet of TeamB.

My question is, how can i make excel copy this value once i enter it for TeamA in the results sheet for TeamB.

View 2 Replies View Related

Custom VBA Function - Automatic Calculating Values

Feb 27, 2014

I'm having problems with a custom VBA Function, regarding with the automatic calculating values.

Basically i have a function that receives an input parameter, cell address, and returns a string, changing the cell value.

View 4 Replies View Related

Excel 2010 :: Automatic Generate List - Row / Column And Values

Jul 8, 2013

How can I create a Makro that looks for values (e.g. values > 90) and that then generates a list with: all the values greater than 90, the row names and column names of the values?

I am pretty sure I will need a Makro for this, but how to create it. I am using excel 2010.

I have attached a file to give you an example. The red table is the table with the values. The blue table is what I want to be generated automatically. In the example I did it manually.

Workbook1.xlsx‎

View 2 Replies View Related

Calculate Values Cumulatively Over And Above Previous Values

Apr 17, 2007

REFER TO MY ATTACHMENT.

Can I get a simple ONE LINE formula to calculate the below combination

Basic Cost = 100 (A) (my Material cost)

ADD : 10% for Freight (B)

A+B = C

ADD : 10 % for Overheads on 110 (On C) = D

C+D = E

ADD : 15% towards Margin on 121 (on E) = F

E+F = G

WHERE G = 139.15

I require this because my %s varies according to products.

View 6 Replies View Related

Calculate Textbox Values

Nov 25, 2007

What is the best way to check to be sure that a text box contains numeric values prior to performing calculations?

I have a form that has many textboxes which a user enters values into to perform calculations. I want to make sure that each necessary field contains a numeric value prior to performing the calcuations.

This is what I have so far but for some reason it keeps giving me the message box:

If WorksheetFunction.IsNumber(Me.specGrav_txt) = True And _
WorksheetFunction.IsNumber(Me.pAngle_box) = True And _
WorksheetFunction.IsNumber(Me.pLength_box) = True And _
WorksheetFunction.IsNumber(Me.pSize_box) = True And _
WorksheetFunction.IsNumber(Me.pQty_box) = True And _
pModTrap_btn.Value = True Then
PrimMTcalc
Else
If WorksheetFunction.IsNumber(Me.specGrav_txt) = True And _
WorksheetFunction.IsNumber(Me.pAngle_box) = True And _
WorksheetFunction.IsNumber(Me.pLength_box) = True And _
WorksheetFunction.IsNumber(Me.pSize_box) = True And _
WorksheetFunction.IsNumber(Me.pQty_box) = True And _
pFullRnd_btn.Value = True Then
PrimFRcalc
Else
MsgBox "There is missing data." & vbNewLine & _
"Please check to make sure that all runer data has been entered" & vbNewLine & _
"and the Specific Gravity field contains a numeric value."

End If
End If

View 9 Replies View Related

Calculate Sum Of Values Based On Month

May 21, 2014

I have been using Excel for a while but i'm kinda stuck at one point where i have to calculate the sum of the numbers corresponding to the month of the data.

Column 1 has all the dates in different months - in this workbook i've included only jan, feb and mar. The second column has the counts corresponding to the dates.

Now if a user inputs the month (1,2,3) number in F2, then we need to compute the sum of all the numbers from second column corresponding to the month in column 1 and display in cell F4.

View 3 Replies View Related

Calculate Values Based On Category?

Jan 30, 2014

I have 2 tables:

IDTypeValue
1A3
2A3
3A4
4B4
5B3
6C2
7A4
8A3


And

TypeTotal
A
B
C

I need to "total" column to automatically display the sum of the values for the categories A, B and C. Is there a formula I can use for this?

View 2 Replies View Related

Calculate According To The Values Of Adjacent Boxes

Nov 15, 2009

In the chart I attached there are 20 columns and 7 rows. The calculations are as follows: K in first period - 8 (given). product per worker (y) - 2*K^(1/3) = 4. Total invesment - s*y - s (savings rate) is given as 0.1 and y was calculated in the previous line. s*y = 0.1*4 = 0.4

Depreciation on capital - deperciation rate is set at 2.5% (0.0025) so the depreciation is 0.0025*k = 0.0025*8 = 0.2. Net investment = Total investment (0.4) -Depreciation (0.2) = 0.2. Consumption per worker = product per worker (4) - Net investment (0.4) = 3.6

Growtn in product per worker - Can only start calculating from next period. It is (yt-yt-1)/yt-1. (Next year's product per worker minus this year's product per worker, the answer is divided by last year's product per worker).

View 3 Replies View Related

Calculate Elasticity Of Logarithmic Values?

Feb 4, 2014

log linear Regression. The thing is I do not know how to calculate elasticity of logarithmic values, slope, std. error in order to make forecasts. Is there a way solve it with Linest or any other formula. I am attaching a spreadsheet to better see.

View 7 Replies View Related

Formula To Calculate Values From Words

Nov 10, 2009

There are five levels of Performance.

Not Evident(o), Emerging(1),Operational(2),Highly Functional(4),Exemplary(5)

There are ten rows of Categories of Performance.
There is one final column of Performance Summary for each category.

There are seven columns that are report sources of Performance.
There is one final row of Performance Summary for each report source.

There is one cell that is a final Summary of Performance Overall.

The cells have drop down lists of words only.

I need the Summary cells to show the result of calculation of the average for each row and column.

View 7 Replies View Related

Calculate Average Of 3 Values But Ignore If Any Value Is 0?

Dec 5, 2011

I am making a summery table of lots of soil contaminant data.

In my summery table, for each determinand I want the average value automatically taken from data from a number of other tables within this same spreadsheet.

For example, for pH- I would average the pH value found in each table, from cell D6, G24 and AB9.

The problem:

Out of the three tables where I take each pH value from, on occasions only one will have a value- the other two will be "0".

How do I ensure that, when averages are taken, it will always ignore '0' values?

View 3 Replies View Related

One Value With Multiple Values Within - Need To Calculate As Percentage

Jan 16, 2014

I have a list of group ID codes, which contain 1 or more product codes within them.

Some product codes contain an "alternative" value (the actual value is irrelevant) and others do not. See example below

Group ID
Product Code
Alternative

56381
240027
160380

[Code] .....

Ultimately what I need to achieve is a percentage of how many product codes, within each group ID, contain an alternative.

So for the example above, group ID 56381 would have 50% codes with alternatives.

By counting the occurrences of a group ID and whether 1 particular code has an alternative I have calculated individual percentages against the size of the group e.g. product code 240027 (given a value of 1) divided by the total number of codes in the group (4), returns 0.25. Obviously doing this across the whole group would give my result (0.5 or 50%)

However some groups contain over 100 codes and the spreadsheet is 40K rows!

View 5 Replies View Related

Calculate UserForm ListBox Values

Aug 22, 2008

I have several listboxes in userform. They are named like this:

Work1, Salary1, Workforce1, Hours1, Price1
Work2, Salary2, Workforce2, Hours2, Price2
Work3, Salary3, Workforce3, Hours3, Price3
...
Work24, Salary24, Workforce24, Hours24, Price42

Workx listbox contains text, others contain numbers. Now I need Pricex listboxes to contain the value of this calculation: Salaryx * Workforcex * Hoursx (For example Price17 listbox value would be Salary17 * Workforce17 * Hours17)

However, if Workforcex listbox is empty, then Pricex listboxes should contain the value of this calculation: Salaryx * Hoursx Then again, if user wants to skip entering Salaryx, Workforcex and Hoursx, I want to allow entering value straight to Pricex listbox. Then Salaryx, Workforcex and Hoursx listboxes should be enabled.

On the other hand if there already are values in Salaryx, Workforcex or Hoursx listboxes, then the Pricex listbox should be not enabled. I need the values of these calculations to be inserted in Pricex listbox right after there are enough inputs without pressing any button etc. (For example if there are values in Workx, Salaryx and Hoursx inboxes, the calculation should be entered to Pricex listbox immediatelly.

View 4 Replies View Related

Calculate Totals At The End Of Filtered Values

Mar 18, 2007

I need to calculate a subtotal like value on the last row of a filtered region.

e.g.

description year sum
name1 3 yrs ago 200
name1 2 yrs ago 230
name1 last year 250
name1 forecast 220
name1 forecast value 1400

name2 3 yrs ago 200
name2 2 yrs ago 230
name2 last year 250
name2 forecast 220
name2 forecast value 1400

How to put a value on the last row of filtered column. let's say that above list is very little in comparison with the real list. so, let's say that i look up for name36, witch begins on row (36*5) -> 5 is the values of the year column; after autofilter with "name1" the very left column with row index become blue and show rows from 1 to 5, than, next row is the last non-empty row.

View 9 Replies View Related

Calculate A Lot Of Averages Of Non-connected Values

Feb 20, 2008

Situation: I need to calculate a lot of averages of non-connected values. That is, they are separated by several rows (which also contain values). So far, I use the code-sample below (just to illustrate), which is not really elegant. Unfortunately, it seems that this technique comes to its limits when a high number of different non-connected values are combined into one string and get assigned to a formula- range (last line of code), which is where the program stops.

My question is: Is there a nice way to solve this? A way, which is not limited by the amount of data processed? The only way I could think of, would include a UDF, where a sum, sums all values up and then devides by the number of added sums ... but this would be relatively slow, and I have an awful lot of values to be averaged (100 sets * 6 rows * 200 values = 120.000 calculation- steps), as well as STDEV and a Standard Error of Mean (SEM) to calculate. Is there a better alternative?

Const intCells=9 'actually, this is no constant but a variable
Const i=4 'actually, this is no constant, but a nested for- loop-value
Const intLinesInBetween = 12 ' amount of lines, which separate my values
Dim j As Integer 'simple counter, runs through all cells
Dim rngUpperRow As Range 'Range of the upper row = normalized time vector
Dim rngCurrentRowAvg As Range 'current row into which avg formulas are inserted
Dim intCells As Integer ' amount of experiments in range............

View 4 Replies View Related

Calculate Mean Of Column B Values Based On Date Values In Column A?

Dec 5, 2013

Below the two columns represent Column A (date and time) and Column B is temperature.

How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?

5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4

View 2 Replies View Related

How To Calculate Even Distribution Between Two Values Over A Set Number Of Columns

Feb 17, 2014

I am in need of a formula to calculate the even distribution of values between two set values over a set number of columns. For example take a look at the attached screenshot. I have the numbers 2.88 and 2.44 and I need to fill in the empty cells between the two with with an even distribution of numbers in between the two (in descending order) over the 8 columns Screen-shot-2014-02-16-at-3.33.08-PM.jpg

View 1 Replies View Related

Standard Deviation - Calculate Values With Only Two Numbers?

May 30, 2014

An age-old controversy has resurfaced in our lab regarding the calculation of a mean and standard deviation of a set of two numbers. There have always been those who say that you can't have a standard deviation of two numbers, but now someone has said that a mean of two numbers is meaningless (no pun intended). What is the current thinking on this? Of course, mathematically speaking, you can certainly calculate these values with only two numbers, but is a mean of two numbers not considered a valid measurement? How about a standard deviation?

View 2 Replies View Related

TREND Function Calculate 2 Possible Y Values Along A Line

Mar 25, 2014

I currently have in my equation the trend function to linear extrapolate the date a line would cross either my upper or lower limits (100.1 and 19.9) between 2 data points. However if the 2 data points span both the upper and lower limits (as per the 2 attached examples) then unfortunately the trend function is only able to return the 1 date (where I've specified the x value). Is there any way for the TREND function to trend the 2 values? Do I simply add the 2nd x value to the new x's?

I have attached both the data and their graphs to visually explain my problem : EF Workbook.xlsx

View 2 Replies View Related

IF Function In A Formula - Calculate Array Of Values

Jun 15, 2014

If the data looks like this:
10
7
6
10
9
9
3

What would the formula be to calculate that array of values = 57% because 4 of them are equal to or greater than 9, and there are 7 of them in total? The formula should accommodate however many numbers are listed and calculate what percentage of them are 9 or 10.

View 5 Replies View Related

VBA Code To Calculate Two Column Values Automatically

Aug 10, 2009

I have a simple script that puts the save time in the last row of column C when the spreadsheet is saved. Another script puts a username in Column A and column B contains the time opened. I would like to add to the save script to make column D od the active row have a calculation similar to:

View 2 Replies View Related

Calculate Prices Using Values Entered By Size

Nov 11, 2008

I am filling out an order form. My values are being entered as sizes. I would like to caculate any entery as 1 X the amount of the item, but the entry is for example.. "YS" and not the number 1.

View 4 Replies View Related

Calculate Total Number Of Values For Each Day Of Week?

Dec 2, 2013

My spreadsheet is set up so that Column A has dates and Column B has a value. How can I calculate the total number of values for each day of the week? I've tried a few formulas but they either didn't work or didn't actually take the value into consideration and just counted all the 'Mondays'. I'm not sure if that's clear enough, but if we're just looking at Mondays to simplify it:

Monday, 1 January 2000: 2
Monday, 8 January 2000: 5
Monday, 15 January 2000: 0

Mondays: 7

View 1 Replies View Related

Calculate Critical Values For Normal Distribution

Dec 4, 2007

I have weird alpha value like 14.385%, a sample size (36). What is the corresponding critical value for the normal distribution. There are questions like this dealing with the Student T dist, Chi Squared and F distribution. If i can figure out how to do it for one I can probably do it for all of them.

View 9 Replies View Related

Calculate Average Based On Matching Values From Two Worksheets

Jan 22, 2010

Worksheet 1

I am calculating group averages for the following performers - very good, good, average, low, very low - for a series of factors.

Worksheet 2

Contains the same factors with the values for which Im trying to work out the average. Each factor has a performance rating above it, either very good, good, average, low, very low.

I need a formula which will match the performance rating from worksheet 1 (I3, J3, K3, L3, M3) to worksheet 2 and then calculate the averages of each factors based on those matches.

View 10 Replies View Related

Excel 2010 :: How To Calculate Different Factors Values Which Are Numbers

Apr 21, 2014

I am using Excel 2010 and I am trying to calculate 4 different factors' (columns) values which are numbers. Based on my analysis I will assign the value from 1-5 for each factor and at the end I have to decide the priority (a new column) adding all 4 columns' numbers. My Priority column has three criteria (High, Medium, and Low) but I don't know what formula/function to use and how. I have tried IF function but did not work.

View 9 Replies View Related

Compare Cells And Use A Range Of Values To Calculate Totals

Apr 16, 2007

I want to compare cells and use a range of values to calculate totals (i.e. count if cell A1=boy and cell A2 equals either "fat" or "skinny")? Also, I tried using wildcard character "*" in the SUMPRODUCT formula, which didn't work (i.e. if cell A1="boy*" would return at TRUE if the cell contained "boy", "boys", "boy and girl", etc.). Is there a way to include wild card characters in a SUMPRODUCT formula like the ones described above?

View 9 Replies View Related

Calculate New Values Over Old Values

Sep 20, 2007

i want to divide an entire column by a number and store the result in other column,. generaly we can do this for a single cell by writing the below code in the next cell (for example) =Q1/60

however my sheet contain about 1700 entries and it is very difficult to write the formula for so many entries. requirement:

CREATE TABLES LIKE BELOW?Q(Original column) R(required column)(Q/60)
60 1
120 2
180 3
240 4
300 5
360 6

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved