I have made a Pop Up Calendar for my worksheet Called frmCalendar.
How do i get it to activate as soon as a user clicks in the appropriate cell?
Can i get it to activate on a column (All cells in the column) as opposed to just a single cell?
I have an excel file with a column (I) which lists the total number of businesses in a different tab (DATA) that meet certain restrictions (these restrictions being listed in the same row in different cells). When the cell under coluimn "I" is double-clicked, it pulls the businesses from tab DATA that meet the restrictions for that row and shows them all in another tab.
I don't know the person that created this and was wondering if there is a way to figure out what is being done to make this happen? I looked in macros, but didn't see anything relating to this. Anyone know how this is done?
So you know, I have tried double-clicking other cells, but nothing happens - not even editing into the cell (altho this can be done from the toolbar up top).
I have a bit of code that I saved as an add-in. The code does a couple things: (1) Creates a right-click button that on action (2) draws a rectangular auto-shape that is the size of any selected range.
The add-in seems to loaded correctly.
However, when I launch a new excel sheet, my intent was to have the code (the right click option) be available whenever I opened Excel.
Is there another step to accomplish this?
Double Click to Activate Message Box
modify my code to do the following:
I have a userform that has a listbox that contains data in 7 columns. I also have a command button that when clicked allows the user to edit the data in whatever row of the list box is highlighted. This works fine.
I decided to have a double click in the listbox on a row do the same thing. So I simply picked the double click event and called the command button sub. When I try this, it runs the command button sub, but then it runs the userform Activate sub. This is a problem as it does things that I do not want to occur again.
I then decided to put the command buttom code in a separate sub and then call that sub on the double click -- same result.
Then I just put the exact code that I have in the command button into the double click event -- still does it.
Anyone know why this happens, I see no reason for it. It works great in the command button, but with double-click it run the userform Activate sub when it is done.
Here is the code that runs (if called by a command button it works fine, if called by a double_click in the listbox, it runs the userform_activate sub):
Private Sub Edit()
SetCell = "d" & ListBox1.ListIndex + 5
Range(SetCell).Select
Range("AA1").Value = 1
ADD_ODC.Show
NextRow = Range("D65536").End(xlUp).Row
EndARR = "J" & NextRow
ODCData = Range("D5", EndARR)
ListBox1.Column = WorksheetFunction.Transpose(ODCData)
Range("AA1") = ""
ListBox1.ListIndex = -1
Filling
End Sub
I wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies View RelatedI have the following problem to solve:
Cell x in col K is filled with a col number e.g. 'V' (validated via validation list).
Cell x in col L is filled with an amount.
How do I get the amount of cell Lx into cell Vx? This to be done only when the amount Lx not equal to zero.
Can this be done with a formula, or do I have to use a macro? I tried to find the solution for both options, but sofar I have nothing that works. Via the Excel help I could not find the solution. I know how to create a macro activated via a button. I prefer automatic filling by Excel.
(using excel 2k7)
Is there a way to create an in-cell dropdown list, then when only 1 item is selected an action is done, plus this has to be repeated for at least 20 rows, preferably 200.
I can do it with an activeX combo box, but that will be tedious and looks messy. The form control box's were linked, or at least when I created them.
Data validation is the prefered method for my drop down list. It looks neat and is easy to replicate for 200 rows.
Per the table below, I compute how many months to average project costs over, establish month in which the costs begin, and these accumulate in the work in progress (WIP) end columns, however in the month the final stage (to hit 100%) of costs are complete, the project is invoiced and the WIP is released - Noting the month in which the last costs are incurred are not added to total to reverse out. The 3 projects and final columns demonstrate the different scenarios and the results I would expect to see, I just can't formulate anything to release the previous months WIP without it repeating the negative for the rest of the year - if that makes sense?
Sheet1 *ABCDEFGHIJKLMNOPQRSTUVW1
*********Project start point*Forecast costs incurred*Work in progress2**% project complete
****** * * * * * * 1 * * * * * 2 * * * * * * * 3 * * * * * * *4 **********3
ProjectJun-14Jul-14Aug-14Sep-14CostsStagesMonths*Jun-14Jul-14Aug-14Sep-14
[Code] .......
I have a macro to copy/paste B14 to B14 in next months workbook. Once a year the event occurs twice in a month, resulting in B14 and B15 both having values, the other 11 months B15 is blank. For this one month I need to copy/paste B15 to B14 in next months workbook. The macro is quite long. So it is If B15 has value then copy/paste B15 to B14 in Feb workbook, otherwise copy/paste B14 to B14 in Feb workbook. Unable to work it out myself.
View 8 Replies View RelatedI ahve looked loads on here but I really did not understand the " find" statement (!) so have had to do a lookup the only way I know - with loops.
I have two problems:
The first being that it takes 6mins to run and return values.
The second AND MOST IMPORTANT is the following....
What i want to do with the following code is - on the first "If" - if I find an emptycell/blank, i want to exit the "if" so the first "next" statement is incremented - in other words, be able to check if the next cell along is blank/non-empty
I tried using the "exit for" but I only want to opt out of the if statement - not the actual "for..next"
I would have used a goto to get to the line I wanted but it has different meanings with this language....
Numrows2 = Worksheets("File2").Range("A65536").End(xlUp).Row 'Gets the File2 Row count
For e = 2 To 7 'Cols B-G (2-7) contain the headings
For d = 1 To 229 'There are 228 cells down to check
For f = 7 To 212 'File1 has 206 cells across cols 7-212
Worksheets("Looklist").Activate
If IsEmpty(Worksheets("File2").Cells(1, f)) Then
Exit For
I have a range of cells that I want to watch for a change in contents. If any cell in the range has a change in contents I want to launch a MessageBox that asks if they wish the new value to be entered automatically in all of the other cells in the range. Example:
Range = B8:M9
User changes F8 from "empty" to 38. MessageBox should launch asking if they want 38 to be entered into all of the cells in the range. Upon answering yes new contents of F8 should be inserted into the rest of the range.
I have an excel file that contains two sheets. Sheet2 contains rows of different types of products with each of the columns containing details about the product.
On Sheet1, I have setup a data validation list in which a certain cell contains a drop down box that selects a product from the first column of all the rows on t from Sheet2. I used
Converting old reports to usable excel format. I am having trouble using VBA to set up a looping macro that would search Column A for cells with the text string: "ACTIVITY TOTAL". If cell has that value I would like to perform text to column action on the adjacent cell (R0C1). The macro recording for the test to column settings i need is :
Selection.TextToColumns Destination:=ActiveCell, DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=True, Other:=False, OtherChar _
:=":", FieldInfo:=Array(Array(1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, _
1), Array(6, 1), Array(7, 1)), TrailingMinusNumbers:=True
I have attached a sample of what I am currently working with. The actual file has roughly 6000 lines of data, so I would like the macro to go through all lines.
Attached File : LoopingVBA.xlsx
I am about to write a small macro to do a iteration calculation. I would like though for the user to select me a cell so that the macro uses the value in that cell to start calculations. Now, what I think would be the problem is how do I code a "time" or notice an action such as clicking in a cell to continue with the macro.
Would it be by inserting a pause in the code of a certain time so that gives the user time to click and wait for the code to start? If so, how would much time is enough? Is there another thing that could restart the code such as "noticing a click in a cell" command in VBA?
Basically, I'd like my macro to be activated whenever the value in cell A4 changes. Cell A4 has a numerical value between 1 and 10. The macro clears a contents table. Here it is:
Sub Clear()
Sheets('Form').Select
Range("H4:L10").Select
Selection.ClearContents
End Sub
How to get the (module) macro to be activated whenever cell A4 changes value?
I have code that calls a dataform when I click on a command button. Regardless of where I am in the row, the command button is in column A. I want the selected cell to move to column B in the same row so that when the userform displays it will show the correct data. (I have used
Private Sub UserForm_Initialize()
Container.Value = ActiveCell.Value
PONumbers.Value = ActiveCell.Offset(0, -1).Value
SizeType.Value = ActiveCell.Offset(0, 1).Value
Vessel.Value = ActiveCell.Offset(0, 2).Value
'etc
End Sub
to populate my userform.
Can I add something in my call code to also select the cell I want? Or alter the initialization code to start at the beginning of that row?
I have an excel file that I want a macro to run when the cell changes to "Yes" (location B21). The cell options right now in a drop down list is "Yes" or "No". The Macro is called helper. How do I get this to work when they pick yes or no from the drop down list. I wanted to attach the file in this post, but it will not let me. I can email it to anyone who would like to work on it.
View 9 Replies View Relatedi'm trying to combine vlookup and activecell here.
based on value that the user enter it'll activate the first cell on the row.
example:
a1:id
a2:1
a3:2
a4:3
b1:name
b2:josh
b3:alex
b4:ray
the user will input the id, and using vlookup i want to find the id and set the first column as an activecell. So for example the user input is 3, i want a3 to be the activecell.
What code can one use to Activate a worksheet on a workbook by using a Cell value on a worksheet.
View 4 Replies View RelatedI am trying to activate a window and the name of the window to be in a cell. lets say: Windows(file2.xls).Active
I want something like this: The name of the file is in B2 cell in tab Sheet1 in file file1.xls so the line will be like:
Windows(.............).Active
i do not know what function to use.
I have a user form containing a calendar. What I'm trying to do is that if any cells are selected in a range - D4:E83 - then I want to run the userform therein forcing the user to use the calendar and ensure the date is correctly formatted.
The userform is named frmCalendar.
i need a VBA code to activate workbook (which is already opened) with reference to name in cell A1
in Cell A1 is "masterworksheet.xls"
I want to activate the sheet based on my cell value but the prog is not working.
Sub emptest()
Dim tempname As String
Worksheets("team").Select
Range("c24").Select
Do While ActiveCell.Value ""
If ActiveCell.Value = tempname Then
Worksheets(tempname).Select
Else
MsgBox "no sheet"
End If
ActiveCell.Offset(1, 0).Select
Loop
End Sub
When I select a specific sheet I would like cell A1 to be selected using VBA.
View 2 Replies View RelatedHow do I make a userform or maco run when a cell is clicked on. For instance in my case if E20,E23,E30 are selected I want a userform to popup.
View 9 Replies View RelatedI was wondering if there is a way to enable a button when a cell is filled in. the button is disable by default.
I have a piece of clip art in a cell (that moves around in the right cell when i filter/sort the data). i need to know how to select/activate the cell that a piece of clip art housed in. is there a way to say at the beginning of the macro to select the cell behind the picture?
Macro works by offsetting a few cells to the left and pulling the name of the item in that row and then going to another worksheet that is named the same thing as what is in the cell i offset to. If i click on the cell behind the picture first then it works but if i have a diff cell activated when i click the picture it of course doesnt work - so all i need is a way to activate the cell behind the picture.
What code do I need to activate a cell by the choice I make in a combo box? I don't want to change the value in the active cell, just want to offset by columns to enter a number in a different column.
View 7 Replies View RelatedI have workbook with two sheets "Path A" and "Path B". Whenever I activate worksheet "Path B", I want to activate the cell in "Path B " which was the active cell in sheet "path A". For example, if cell R1 was active in path A when Path B was activated, R1 should be made the activecell of Path B. Tried the follwing code... not working.
Private Sub Worksheet_Activate()
Dim r As Integer, c As Integer
r = Worksheets("Path A").ActiveCell.Row
c = Worksheets("Path A").ActiveCell.Column
Worksheets("PathB").Cells(r, c).Activate
End Sub