Activate Formula Without Clicking In Each Row
Jan 1, 2010
=IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z$29:Z$39)-1)
Above is the formula that I have, I am putting it into Column L. When I do auto fill every row that has data in J and K the formula goes into as you would expect.
However the formula does not activate until I double click inside each individual row and hit enter. Therefore if the calculation in L4 was 1.0, then 1.0 will appear as the calculation in every row of Column L until I double click in each row individually and press enter.
View 3 Replies
ADVERTISEMENT
Feb 3, 2013
I found in an old file that i triggered the macro by clicking a button! I would post a pic but i don't know how. How do I activate a macro by clicking a shape on the excel 2002 page?
View 7 Replies
View Related
Sep 6, 2005
Consider using a Worksheet Calculate Event macro (not Change Event) to
monitor the cell in question and call your macro when conditions are right.
"coal_miner" wrote:
> Greetings. Is there a way you can activate a macro through a formula.
> Example:
> =if(A1=B1,(macro here),"")?
View 14 Replies
View Related
Feb 22, 2013
I have a file having around 57 sheets.But here,I have taken a example.I want a file whose show me only summary sheet.But when,I click the cell no.C7 then the related sheet should be open i.e.FNDADRSCC,and all the sheets should be hide.I have little knowledge of HYPERLINK formula but not to the desired stage.
For more clarification, refer attached file.i.e. BOM Sheets
Desire result file have attached also i.e. Excel_formula
View 1 Replies
View Related
Jan 21, 2012
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY SPREADSHEET:
texttexttexttexttextformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 CSDINNECage Nick2581/7/1281$ 600.00 CSDINNECage Nick2581/16/12245$ 25.00 CSDINNECage Nick2581/23/12323$ 25.00 CSDINWPolly Cracker1781/7/12856$ 60.00 CSDINWPolly Cracker1781/16/12242$ 654.00 ARVIPWPolly Cracker1781/23/12322$ 2.00 ARVIPWPolly Cracker1781/28/12161$ 5.00 ARVIPWPolly Cracker1782/6/1284$ 3.00 CSDINSEDim Sum6871/7/1284$ 65.00 CSDINSEDim Sum6871/16/12126$ 5.00
HERE IS MY CODE TO INSERT 1 ROW
Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
recordtexttexttexttextcountformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 2201.5$ 300.00
View 5 Replies
View Related
Aug 12, 2009
I have a lot of text in a cell and I want to create a Hyperlink using only 2 or 3 words and not the whole text. Unfortunately, it seems as though the hyperlink can only be from the cell itself. Is it possible with Excel to create a Hyperlink from a section of text in a cell, and NOT from the cell itself?
View 4 Replies
View Related
Jul 15, 2014
I'm trying to make a code so that when optionbutton1 is checked, it allows you to right click to select a cell, then right click on a different cell and select that cell as well as the previous cell, etc. Here's What I have so far.
[Code] .....
View 6 Replies
View Related
Nov 6, 2008
I would like to run a macro by clicking a cell. I don't want a toolbar button/menu item and Hyperlinks don't work. Can this be done?
More info: My macro selects the current row in Sheet A and moves it (cut & Paste) to Sheet B in the workbook. The macro then goes back to Sheet A and deletes the now blank row.
View 6 Replies
View Related
Feb 15, 2008
Is there a way to disallow certain cells to be clicked on?
View 9 Replies
View Related
Jan 20, 2010
When I click on the userform that opens when the workbook does I get this error:
Run-time error '13':
Type Mismatch
This is the code highlighted
DT=UserForm1.TextBox3.Text
View 9 Replies
View Related
Apr 3, 2007
i got the userform to popup when the workbook is open and the buttons work fine... only problem is when i click on a button, it will ask the user yes or no... if the user press yes, it performs the required macro without any problem... but when the user press no, not only it will close the question, but also closes the userform... I would like the 'no' to close the question but not the userform...
View 4 Replies
View Related
Sep 7, 2007
I have a chart that I just added some dynamic text boxes to. That is the text is linked to a cell so that the text is automatically updated.
I also have a scroll bar that is used to adjust one of the cells. However, now once I click on the scroll bar it just disappears. I can click on the space where it is located and it will appear for a split second. Also, if I scroll down in the worksheet and then back up over the scroll bar the image will be refreshed and I can see the scroll bar again.
I didn’t have this problem until I added the dynamic text boxes, it worked fine with static text boxes.
Does anyone have any idea how to get around this, or do I have to stick with the static text boxes?
View 5 Replies
View Related
Oct 4, 2009
I have this data sheet with 7 personnels name in it. What I require is that upon clicking on the name of the person, the profiles that are attached to this person will open up.
Before any name is clicked, these sheets should not be visible to the user and upon clicking on the other names, the sheets that was previously open will disappear.
View 9 Replies
View Related
May 26, 2014
For this example.. Think of this information:
shape = rectangle 1
starting fill colour = 255,255,255 (white)
I have a cell on the other part of sheet which has a value of 0 - but changes to 1 when I hover over another part of the sheet.
I need this shape to change fill from white to an image whenever that cell changes value to "1".
I need all this without clicking on an object! JUST when the cell changes, I can mange it with a click but that's besides the point.
View 14 Replies
View Related
Apr 6, 2007
i have made (found) a way to change the data in a cell by clicking on it, however i can only make it go from 1 to 0 or 0 to 1...heres the VB
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
On Error Resume Next
If (ActiveCell.Value = 1) Then
ActiveCell.Value = ""
Else:
If (ActiveCell.Value = "") Then
ActiveCell.Value = 1
End If
End If
End Sub
however, i would like the code to do a different task, i would like it to add one to the number everytime you click on it...i.e. it goes from 1 to 2 to 3 to 4 to 5 etc. everytime you click on it...
if it is possible, i would also like it to be restricted to a few cells, which i can determine afterwards and change
View 14 Replies
View Related
Feb 3, 2009
I have seen this on many spreadsheet but never figured out how to do this - click on a cell in a spreadsheet to open up a new spreadsheet?
View 4 Replies
View Related
Jul 3, 2009
I've included the code I'm using to calculate the net weight depending on which option button is selected. I use a flag ("VLAG") to know whether it's the first time the button is pressed. All variables are DIMmed at initialization (different sub).
By using other flags, I can see the code runs perfectly, but the tare weight ("TARRA") is not incremented each time the button is pressed. The formula I'm using to increment is
View 4 Replies
View Related
Aug 25, 2009
I'm trying to do. I have 2 columns, both have empty cells with borders. I would like to make it so that when the user clicks one of the cells, it turns grey and the one beside it turns white. I set up two macros as follows:
View 3 Replies
View Related
Sep 2, 2012
I want to make it possible to refresh a particular sheet on clicking a button. i can create the button and even assign the macro. but the code for macro, to refresh i don't know how to generate the code.
View 6 Replies
View Related
Feb 11, 2014
I have some problems with VBA. So the problem is that there is this page Page (if you want to get to this page with the program you have to write "Krateris" into the msgbox) and I want that the program would click the link in the first result or selected result
So this code is working just I need to expand it to get the result which I wrote above. I am writing this code in module not in worksheet.
Code:
Sub test()
Dim btnInput As Object
Dim IE As InternetExplorer
Set IE = CreateObject("InternetExplorer.Application")
company = InputBox("write company name")
[Code] .....
View 6 Replies
View Related
Apr 14, 2014
A
B
C
D
E
F
G
I have a spreadsheet with formulas in column C, D, E, F and G. The only numbers I need to enter are in columns A and B. The formula in column C comes from the =SUM(B1/A1) Column D is calculated based on the result of column C, etc...
How can I set up the spreadsheet so that when I enter the data in column A and B, everything else calculates automatically; without having to double click and press enter in each cell?
My Goal: To put data (numbers) in Column A and B and than have C, D, E, F and G calculate by themselves without clicking.
All of my cells contain numbers, not text
View 6 Replies
View Related
Oct 30, 2007
I have created a macro that autofilter values in sheet 2.
In sheet1 I have a cocpit of values from Sheet 2, 3, 4 and 5.
In the monitoring cells in Sheet1 I would like to doubleclick (or similar) in the cell where I have a value from ex sheet 2, and then trigger the macro which does the autofiltering.
View 9 Replies
View Related
Jul 26, 2008
how to get a userform by double clicking a cell.
I have created a userform, (my first one)-very simple form, i have created a massive textbox, so when i doubleclick a cell in Sheet 1, userform pops up and I can write comments.
I am not sure how to write a code for this? I know it will have Private Sub Doubleclick, not sure on the rest?
View 9 Replies
View Related
Aug 15, 2006
I am trying without success to for a macro to run when a specific cell is activated. i.e. if a users selects cell A1, macro X will run.
View 2 Replies
View Related
Nov 1, 2006
I have programmed a Form in VBA that initializes by clicking a button on a worksheet. The Form features combo boxes, text fields, and a couple option buttons. Once completed, the Form enters the values entered by the user (as strings) in contiguous colums in a single row. The worksheet is locked so as to not allow users to input values into the worksheet directly and bypass the Form.
The question:
Once a row is filled by submitting the Form, i want to allow a click event on that cell (like double-clicking, for example) to pop-up the Form, but containing the corresponding values from the cells in the matching combo boxes, text fields, option buttons. I want to do this so that I can allow modification on a row without letting the worksheet be modifyable without passing through the Form. Here's the code for submitting the Form values into the worksheet:
Private Sub cmdSubmit_Click()
ActiveWorkbook.Sheets("ALTEC Growth Report").Activate
Range("A7").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell.Value = Trim$(txtName.Value)
ActiveCell.Offset(0, 1) = cboCC.Value
ActiveCell.Offset(0, 2) = cboProdServ.Value
ActiveCell.Offset(0, 3) = cboStatus.Value ..................
View 8 Replies
View Related
Dec 12, 2007
I want to display a comment/note that is always visible however:
*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet;
*I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells
*I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet
*I do want that the user can position this comment on his screen where he wants it to be.
View 2 Replies
View Related
Mar 26, 2013
In my excel file, I have a cell with a hyperlink which points to an intranet portal. When I copy the hyperlink and paste it in the browser's address bar, the site opens. But when I directly try to open from the excel, by clicking on the cell, it redirects to a wrong URL and eventually does open the site.
View 1 Replies
View Related
Dec 3, 2013
In any open (new or existing) workbook (Excel 2007), I cannot delete a column by right clicking the column header and highlighting the entire column. The "delete" word is greyed out and not selectable. I CAN however still delete a column by going to the "Cells" toolbar, then "Delete" pulldown menu, then "Delete Sheet Columns". Right clicking the column header is much simpler and easier.
BTW, I can still delete rows by both methods of right clicking on the row header and by going to the Cells toolbar.
View 5 Replies
View Related
Aug 23, 2013
I have a workbook including several sheets.
I'd like to hide all worksheets and in the excel there is only one visible sheet which is Navigation Page. I want to add several buttons on this sheet and each button will be clicked to call the other sheets.
For example, there is a sheet called Sales_Approval_Form and I'd like to add a button on navigation page called Sales Approval Form and when the user clicks the button the sheet will be open for entering data.
View 12 Replies
View Related
Dec 10, 2008
I need to make the Red X at the top firght of my user form "End" rather than "Exit Sub" which I think it is trying to do now, as simply exitting the sub returns it to the previous sub which opens the form again.
View 4 Replies
View Related
