I have a form with Option Buttons and once a selection has been made it opens the relevant sheet on the workbook but I can get it to open the relevant form to feed that worksheet once the selection has been made from the opening form. Is it possible to do this and if so dose anyone no the code.
View 3 Repliesfind the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have a large spreadsheet (1000-plus entries) that all have about 10 or 15 columns of information (product title, product number, etc).
I also made a form that I want to use as a master form, where all the titles will not change.
What I am wanting to do is, by going off the product number, when you click it, this pre-made master form will pop up, and all the information that was located on the large spreadsheet for this product number will be inserted where it is designated to be on the master form.
While I could probably do something like this through Access, we need to keep it on Excel, and in the same workbook so that it will automatically update things once I put a new number or input onto the large spreadsheet.
What I've done so far is... Created two buttons (Add and Find) in my Excel sheet1. If I click my Add button Form1 opens. In Form1 the user enters a number of values that are inserted into sheet2 of my Excel book. If I click my Find button Form2 is displayed. This form contains a multicolumn textbox that shows some of the columns from sheet2 that have values in them. Now to my BIG problem....
I would like to be able to select a row in my multicolumn textbox, click my OK button there and then Form1 should be displayed with ALL the values from that particular row from sheet2. As I mentioned I'm very new at this and I'm not even sure how to do this logically and much less the correct code for it. I hope that someone could thoroughly explain to me what I have to do and why to be able to get this working.
Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId
Private Sub DateBox_Change()
DateBox = Format( Date, "yy/mm/dd")
End Sub.....................................
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
View 2 Replies View RelatedI'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
View 3 Replies View RelatedI am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS
Sub RecallQuote()
'
' RecallQuote Macro
'
Sheets("Form").Select
Range("C2").Select 'this is the cell that holds the quote number to look up from the table
[Code] ......
Using the Roy Cox Database code http://www.excel-it.com/vba_examples.htm , I am trying to populate a user form when the user selects a list row. I don't know if this is important, but I have extended my list beyond 10 columns. The list appears in UserForm2, and it should populate UserForm1. UserForm1 is also available to fill in from scratch; the info pulled from UserForm2 is from a search.
Here is my problem:
UserForm1 does not populate with the current selection, but rather the previous selection. It will appear blank upon the first selection. If I close UserForm2 after getting a blank on Form1 and call UserForm1 from its own macro, I will also see that previous selection.
I have a spreadsheet I use to keep track of weekly sales patterns and use for estimating the amount of a product I would need to order taking into account what I would expect to sell in a given week and what stock I have at present. On the example I've attached, I show where I enter my storeroom count figures, which are organised by supplier and the position in which a particular product appears on the supplier's order form. I have a page which lists the orders by suppliers and which are used to place the orders by e-mail or telephone.
At present I have each supplier section of the order form directly linked to a cell on the storeroom count as per columns K to M on the attached file. However, this means that as products are de-listed by suppliers and extra products become available, I have to edit the formula in each cell as the products now appear in a different position on the storeroom count and may otherwise end up on the order form for a different supplier. I would like to set it up so that I just have to select the supplier name and the table below will automatically fill with the required info, in order of the position they appear on the supplier's form. I'm struggling to combine vlookup and hlookup. Is there a way to do it or do I need to rethink?
I'm trying to pull up a second form from a command button within a form. There's a command button in a sheet to open the first form (frmOrderInput.) Then there's another command button in that form to open the second form (frmPriceInput.)
The Module to open the first is this:
I have got a userform that fits my 24inch monitor screen perfectly, however it doesn't fit other screens. How do I get windows style scrollbars added to the form so people can use these to see the whole form?
View 3 Replies View RelatedI have two forms...clicking a specific button on the first form should display the second form which works fine.
VB:
Private Sub Image_Employees_Click()
Form_Main.Hide
Form_Employees.Show
[Code].....
When I do this twice, however, the second form seems to freeze/hang and I have to close Excel and then re-open it. I feel like I'm overlooking something obvious...
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?
I need to create a form that if you were to enter a name in the text box it would fill all the information across that row into other boxes on the form. Basicly if I type John Doe in the text box it would look in col A for John Doe and then put whats in the cells on that row into different boxes on my form. I have tried searching but I have had no luck. Im very new to forms so this is a great experience.
View 3 Replies View RelatedI have 2 forms. Form1 and Form2. I load Form1 to display. A button on Form1 calls Form2 to display. After I hit Cancel-Unload on Form2 it doesn't dissapear. How do I get rid of the residual image of pesky Form2 after I unload it and only display Form1 WITHOUT having to reload Form1 after Form1 calls Form2
In English
Form1 Displays
Form1 call Form2 to display
Form2 is unloaded by hitting a button on Form2
Form2 is unloaded, however, it's image still displays!!!
Need some way to force screen to refresh without having to unload Form1!
combobox's.. I have it working as I need it to with Active-x combobox but I need to move to a form method because the Active-x combobox is buggy in the worksheet and has these strange font and box resizing issues which there is no solution to out there.. Something about if you have external monitor or projector plugged in and it using a different resolution to what your native laptop or pc is using.. doesn't make any sense to me and unfortunately I have given up on it.
Problem is what I want doesn't seem like it can be done with form combobox but I will seek your support first before I come to that conclusion.
So using form Combobox, this is my setup:
Combobox1 contains a short list of Teams i.e. ENT,MEL,EMEA,MTVSSL,TSJ -- I am referencing this from the FORMAT CONTROL property Input Range: TEAMS!A2:A6
Combobox2 I need to list the names of the people in those teams i.e. John Doe etc.. I have column with teams as headers and the people in each column in the respective teams. i.e. B1:B16 has the list of people for the team called ENT (B1 is the header "ENT") and B2:B16 is the names of the people.
Problem is I don't know how I can link the two based on selection in Combobox1?
One catch, I prefer not to hard code the names of people in any code, if I can reference from a table or cell that would be better as the list of people within a team will increase over time.
I have one form control listbox in excel. It is with multi selection Is there a way to find the latest selection in the listbox?
View 2 Replies View Related I have it working as I need it to with Active-x combobox but I need to move to a form method because the Active-x combobox is buggy in the worksheet and has these strange font and box resizing issues which there is no solution to out there.. Something about if you have external monitor or projector plugged in and it using a different resolution to what your native laptop or pc is using.. doesn't make any sense to me and unfortunately I have given up on it.
Problem is what I want doesn't seem like it can be done with form combobox but I will seek your support first before I come to that conclusion.
So using form Combobox, this is my setup:
Combobox1 contains a short list of Teams i.e. ENT,MEL,EMEA,MTVSSL,TSJ -- I am referencing this from the FORMAT CONTROL property Input Range: TEAMS!A2:A6
Combobox2 I need to list the names of the people in those regions i.e. John Doe etc.. I have column with regions as headers and the people in each column in the respective region. i.e. B1:B16 has the list of people for the team called ENT (B1 is the header "ENT") and B2:B16 is the names of the people.
Problem is I don't know how I can link the two based on selection in Combobox1?
One catch, I prefer not to hard code the names of people in any code, if I can reference from a table or cell that would be better as the list of people within a team will increase over time.
I have 2 different forms that I need info from one, added to the other.
The reason for this is to update pricing from a new file, into an older file with the same product code for each product.
on form 1(the one I want to keep), column x is price(that I want to update from form 2 column L), and column B is the product code(sku)
Now on form 2 Column L is the The customer price(this is the data I need moved over to column X on form 1. and column I is the UPC 10(sku) that needs to match the same sku(product code) on form 1.
Gee this sounds confusing aFTER i TYPED IT.. i HOPE THIS MAKES SENSE. i WILL ALSO ADD THE 2 FILES, SO YOU CAN SEE WEHAT I am talking about.
Please help as I have about 30,000 items total, and would take way too long to update prices manually every 2 - 3 months.
Im trying to loasd a pic of a userform using cell A1 as the referance for the file though i am going wrong somewhere.
View 13 Replies View RelatedI had a question earlier regarding how to call a form using a variable rather than the form name. This works correctly and the form is displayed, however the forms behaviour deviates from the code within the form.
I have attached a simple example which permits a user to determine where on a page a form displays, if called using the form name directly it functions correctly, appearing at the designated co-ordinates. If it is called indirectly using the variable it reaches the line
I am trying to create a form to use as a golf tracker. I basically have created a scorecard where I input the date, score, fairways in regulation, greens in regulation and putts. I want to be able to put that information just like if it was a scorecard and then have a button that says submit. Then that information is output into individual sheets (i.e. one for scores, one for fairways, one for greens and one for putts).
I have the following code in Usertransfer and I actually want to Launch the userQuestions Form and Automatically Click the Prev Button? How can I achieve this?
Do I need to make things public?
UserTransfer
Private Sub CmdCancel_Click()
Unload Me
End Sub
UserQuestions
Private Sub CmdPrevQuestion_Click()
If m_QID = 1 Then..............
I have a form with several textboxes & comboboxes, I have a button on this form.
What is the code for label1 on userform2 to equal textbox1 on userform1 after i press the button ( i just need to konw how to refer to different forms)?
If nothing is typed in and the OK button is pressed, it changes the entire sheet to values. I'd like the macro to stop if nothing is selected.
Dim sCol As String
sCol = InputBox("Select Column")
Set UserRange = Range(sCol & "9:" & sCol & "35")
UserRange.Value = UserRange.Value
I've tried to do conditional formatting for each of the "Discipline" values in this spreadsheet but it is restricted to only 3. Is there a way around this? I'm trying to setup a color code for the "Discipline" values for example RN=Red, LPN=Blue, Social Worker=Orange, Chaplain=Purple, STNA=Yellow, Volunteer=Pink & Other=Green. So when the "Discipline" cell/cells on each of the patient sheets (ie. "Doe, Jane", "Doe, John", etc.) is equal to say RN the cell would then turn Red either on the spreadsheet or only when sheet is printed.
View 5 Replies View RelatedIs it possible to detect when a auto-filter selection has been made ? Is that when an autofilter hides rows, the activecell could become hidden, which potentially may cause errant data entry, not knowing what cell is receiving entry as it is hidden from view.
if the worksheet contains a change event that autosizes the target row, it unhides the filtered hidden row in the process. I could say if target is hidden ignore autosize, but i would prefer to activate a visible cell (first visible cell for filtered column) on selection of autofilter.
I have a fairly straightforward UserForm with 4 listboxes and 4 option textboxes (the textboxes do not need to be a part of the validation I'm needing). I then have a command button that I want to be enabled ONLY if ANY of the 4 Listboxes have a selection. I've tried the "Change" event code below and it works upon the first selection of any listbox item.
However, if the user de-selects all selections in the listboxes (i.e. they are all unchecked), the command button remains enabled. I need the validation logic to enable/disable the button to persist as long as the user has the form open and if there is not a selection in ANY of the listboxes. The reason being is that if they click the command button it will update the cells in the worksheet, which if empty may overwrite previous work completed with blank cells.