Locate Where Amount Falls Within A Range
May 20, 2012
I need a formula that will tell me which 'BPS' a person should receive based off of the count of loans closed (between 'Criteria 2' & 'Criteria 2.1' and/or the volume (total of 'Loan Amount')(between 'Criteria 1' & 'Critera 1.1'), whichever gives the person a the higher tier.
I have provided an example below. In the example John Doe should receive .01750 'BPS' because he closed over 1 million in volume. If, for example, John Doe closed 5 loans for 400,000, then he would receive .01600, since he met the criteria for the 2nd tier based off of # of loans closed.
The formula needs to take into consideration which 'Comp Plan' the person has, as well as the other criteria mentioned above.
Bitmap BRANCHBitmap COMP PLANCOMP PLAN IDCOMP PLAN TIERCRITERIA 1CRITERIA 1.1CRITERIA 2CRITERIA 2.1BPSSACRAMENTOSAC-COMP-A11$ - $ 599,999.99 020.01250SACRAMENTOSAC-COMP-A12$ 600,000.00 $ 999,999.99 350.01500SACRAMENTOSAC-COMP-A13$ 1,000,000.00 $ 100,000,000.00 61000.01600SACRAMENTOSAC-COMP-B21$ - $ 599,999.99 020.01500SACRAMENTOSAC-COMP-B22$ 600,000.00 $ 999,999.99 350.01600
[Code] .......
View 1 Replies
ADVERTISEMENT
Jan 14, 2009
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
View 4 Replies
View Related
Jun 12, 2014
I have a list (a) with distances and another list (b) that gives numbers to certain distance ranges. For instance:
[Code] ...........
Now, if I have a value of 4.5 in list (a), I want to look up the respective zone. For 4 classes, this can be done with an if formula (=if(4.5>50;Zone 4;if(4.5>25;Zone 3;if(..and so on))).
What can I do if I have lets say more than 100 ranges with respective zones (ranges not of equal size) because an if formula will not be feasible anymore?
View 3 Replies
View Related
Nov 29, 2002
I'm trying to count, in a range of cells, how many fall between certain values, such as between 75,000 and 99,000. The array formulas seems the way to go, but it looks like it only accepts one condition not a range.
View 9 Replies
View Related
Apr 25, 2007
I want my code to verify that the Active Cell on a worksheet falls within a specified range of cells before the sub fires off.
View 9 Replies
View Related
Oct 13, 2009
Example:
0000-0999 Cell a1
1001-1999 Cell a2
2000-2999 Cell a3
3000-3999 Cell a4
These are a ranges of values in a spreadsheet. I would like to be able to do a search or lookup for a number that I designate that falls within one of these ranges and it will direct me to the cell that my value falls within.
For example if I do a search for 1550 it would take me to cell a2 with a range of 1001-1999.
Not sure if this is too complicated for a formula and might need to use VBA.
View 9 Replies
View Related
Mar 12, 2009
Dates
1/2/2006
11/29/2007
7/3/2008
Table:
Year Start Date End Date
2005 01/30/2005 01/28/2006
2006 01/29/2006 02/3/2007
2007 02/04/2007 02/2/2008
2008 02/03/2008 01/31/2009
For each "Date", I need to scan the table and find which "Start Date" and "End Date" range does it fall into and return the applicable "Year". For example:
1/2/2006 will return 2005
11/29/2007 will return 2007
7/3/2008 will return 2008
View 2 Replies
View Related
Jan 12, 2009
If I have A1 ( and the rest of row 1) that equals a standard Date Period such as shown below, What would the formula to be to sum all of the numbers if today falls within the range, as well as sum previous ranges.
For instance, If today were 02/15/09, it would only sum A2
If today were 03/15/09 it would sum B2 as well as previous time periods (B2 + A2)
If today were 4/15/09, it would sum C2 as well as previous time periods (C2 plus B2 and A2)
A1........................................B1......................................C1
"02/05/09 - 03/02/09".............."03/03/09 - 04/01/09"............"04/02/09 - 05/05/09"
15........................................21......................................36
View 9 Replies
View Related
Oct 28, 2009
I am half way through a Worksheet where I am using VBA to perform more than the measly 3 Conditional formats that excel offer. This is working fine but I am now looking into a way of reversing the formats if a mistake is made and the condition is removed.
To make this sound more straightforward it is a rota sheet. If I enter Holiday the cells interior turns pink, Half turns light blue, On Call turns green etc. If this is changed I need to change it back to the original formatting.
I have partly done this with a Case "" but the Rota changes colour with different teams so I need to have an IF statement in there that say if the Target Cell falls within this Range say A5:AF10 change to tan IF the target falls within A6:Af20 change to sky blue etc. Below is the code I have so far.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim WatchRange As Range
Dim CellVal As String
On Error Resume Next
CellVal = Target
Set WatchRange = Range("A1:AF100")
If Not Intersect(Target, WatchRange) Is Nothing Then
Select Case CellVal
Case "Holiday"
Target.FormatConditions.Delete
Target.Interior.ColorIndex = 38
Target.Font.ColorIndex = 1......................
View 9 Replies
View Related
Jun 12, 2014
I am trying to learn more about functions like IF(), AND() MATCH() and LOOKUP()... but so far I cant seem to get it right. I am actually trying to get a simple working formula that can take a value from the first tab and cross reference it with a table in the second tab to return another value in the first tab.
For example....
On the first tab/sheet named "Details", i have a list of people, an area of work they fall in and then a column named region that categorizes their areas of work into groups
A
B
C
1
Name
Area of Work
Region
2
Mr A
J
?
3
Mr B
6
?
4
Mr D
Z
?
5
Mr E
18
?
Then on the next tab/sheet named "Category", I have a table which lists the areas that belong to a region;
A
B
1
Region
Area
2
1
A-J. 1-6
3
2
K-P, 7-15
4
3
Q-U,W,Z,16-20
I have tried formulas like IF(AND(B2=Category.B2),"1","ERROR") but it keeps returning me "ERROR" when it should return "1"
View 7 Replies
View Related
Jul 16, 2009
The number in cell M21 falls into one of the ranges from C4 to C15. A matrix number needs to be printed in each cell from N21 to N30. The selection of the number to be printed in column N (under Matrix Assignment) depends on the range it is next to in array A4:C15. For example (as shown), the correct number for cell N21 is 122 because 0.2626 falls between 0.24 - 0.2699, and Matrix 122 corresponds to that range.
View 3 Replies
View Related
Jan 30, 2013
Secondly, I'm using Excel 2007.
In column B3:B367, I have dates for every day of the year. In column D3:D367, I have body weight for every day of the year. This gets filled in on a daily basis.
What I'm looking to do:
1. Find the first daily weight for the month.
2. Find today's weight.
3. See if today's weight falls within the specified month.
4. Compare the first daily weight of the month with today's weight.
I am able to accomplish #1 with LOOKUP, #2 with LOOKUP, and #4 with IF/THEN. For the life of me, I cannot comprehend how to do #3.
View 6 Replies
View Related
Jul 11, 2014
Data set
Column A Column B
PriceCode1 5.36
Sheet 2 Data Set
Column A Column B Column C Column E
PriceCode1 5.02 10.01 313
PriceCode1 10.02 50.01 314
PriceCode1 50.02 100.01 315
Formula on Sheet 1:
{=INDEX('Price calculation'!$E$1:$E$70,MATCH(C3&D3,'Price calculation'!$A$1:$A$70&'Price calculation'!$B$1:$B$70,1))}
The issue I am having is that the value isn't an exact match so it is returning line 3 with a value of 315 rather than line 1 and a value of 313. What am I doing wrong?
View 1 Replies
View Related
Apr 6, 2012
I am looking for a formula that will enable me to determine which one out of five thresholds a percentage falls within and the retuns a specific value for the corresponding threshold. Here is an example of the data (only showing three thresholds):
_____A________B_________C____
1 ___0.0%_____50%_____$5.00
2 ___51%______75%_____$15.00
3 ___76%_____100% ____$25.00
Where the values in A1 and B1 are the low and high ends of one range. I would like the formula to determine which range the value falls within and return the value in collumn C (C1 for the A1:B1 range).
I can do this using multiple 'if' statements, but am looking for a much more streamlined way to determine the proper value in column C.
View 2 Replies
View Related
Jul 30, 2012
I have a custom range -55% to 55% as part of a grading system for sales growth. I want to return a 0-100% grade depending on where within that -55% to 55% range a sales reps growth for a month falls. For exaple, if a sales rep scores 0% growth for a month, they will receive a 50% grade by where 0% falls within the -55% to 55% range.
View 1 Replies
View Related
May 19, 2014
File A has patients with discharge dates over two years. Each patient may have multiple dates. Example:
Patient Discharge Date
John Smith 7/1/2012
John Smith 10/1/2012
Judge Judy 7/1/2013
Judge Judy 12/1/2013
File B has office visit dates for the patients. Again, each patient has multiple office visits. I need to be able to see which office visits were within 15 days of a discharge date. Example:
Patient Office Visit
John Smith 6/1/2012
John Smith 6/15/2012
John Smith 7/10/2012
Judge Judy 7/20/2013
Judge Judy 12/12/2013
Is there any way to note next to the discharge date that for John Smith the 7/10/2012 office visit was within 15 days of the 7/1/2012 discharge? And the same for Judy with the 12/12/2013 visit?
View 8 Replies
View Related
Jun 6, 2006
i need to make a formula for excel which will verify if my actual value falls within a specific range. for instance if my value is 0.15 and the allowed range is 0.145 to 0.155 then i want to display the number zero in the cell however if the actual number is above or below the range i want to calculate the amount of deviation from the range
View 2 Replies
View Related
Jul 3, 2009
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
View 3 Replies
View Related
Jan 18, 2013
I have the simple code below to perform and filter and copy:
Code:
Sub Macro1()
Sheets("Data Dump").Select
Range("A1:F100000").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"K1:L73"), CopyToRange:=Range("P1:U1"), Unique:=False
End Sub
However, the CriteriaRange can change depending on which OptionButton the user chooses on a different tab. My reference the range is in Cell N1. So how can I use Indirect to refer the range in Cell N1 instead of the current CriteriaRange of K1:L73?
View 5 Replies
View Related
Jun 10, 2008
in my workbook i have 3 sheets named "time" "final" "push". in the sheet thats named "final" ihave in cells B2 and C2 2 values that correspond to a type interval (lets say 75-378) in the sheet "time" each row represents 1 sec, starting at one.
what i would like to do is locate the interval defined by the 2 values on "final" sheet
and find the min max and value in column S of the "time" sheet.
i.e if B2 and c2 said 78 and 378 it would go on "time" sheet select the range of S78-S378 and find the mean, the max and the average and report them in sheet "final" in cells E2 F2 G2 respectively What would be optimal is that there was a way to perhaps loop so that it can do the same thing with the range defined by the values in B3 and C3.
View 14 Replies
View Related
Feb 7, 2008
I need a formula (or formulas) to give me the "coordinates" (Column & Row location) of a certain value in a large rectangular range. Intuitively this should be doable with a smart combination of VLOOKUP, HLOOKUP, INDEX, MATCH, ADDRESS and/or CELL functions (maybe in the form of "array formulas") but I can't seem to find the way...
Here is an example of what I need:
I have a large rectangular range (A10:F500), full of numerical values. Then in cell A1 I have one of the (many) values contained in the range, let's say, 3.14159. I need two formulas that give me the following:
a) A formula in cell B1 that tells me in which COLUMN of the range the value 3.14159 is located
a) A formula in cell C1 that tells me in which ROW of the range the value 3.14159 is located
If the range consisted of a single column (or a single row), this would be an easy INDEX and MATCH combination.... but I'm dealing with a *rectangular* range here...
View 9 Replies
View Related
Aug 24, 2006
Dim myDynRange As Range
Dim myLastRow As Integer
Range("H:H").Select
myLastRow = Range("H:H"). CurrentRegion.Rows.Count
myFirstCell = Cells(Counter, 8).Address
myLastCell = Cells(myLastRow, 8).Address
myDynRange = myFirstCell & myLastCell
im having a problem with the last line
myDynRange = myFirstCell & myLastCell
my eventual aim is to do an average on this column with a line like
ActiveCell.Offset(Counter, 1).Value = Application.WorksheetFunction.average(myDynRange)
the reason why my range declaration is so strage is because i was trying to change the dimensions of the range with an offset function because i had many ranges to average but the offset function didnt want to work. this way goes like this....................
View 2 Replies
View Related
May 1, 2014
I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
View 3 Replies
View Related
May 16, 2012
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB:
Sub Macro0CopyFromCSV()
'Insert a blank row and format it in Master workbook
Rows("3:3").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ......
View 9 Replies
View Related
May 2, 2014
Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG‎
View 5 Replies
View Related
Jan 28, 2009
I need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.
Example:
Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%
month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00
and so on...until the end of year.
I tried using an if formula by could not get it to work.
View 9 Replies
View Related
Nov 4, 2009
I need to come up with ways to work around this. Say I have a merged area of A1:A*, what I would like to know is how many columns are actually used in this merged area. A1:A4 would return 4, A1:A8 would return 8, A1:C8 would return 8 et cetera. Now I've played a bit with MergeArea.Address and although it returns me the correct range, I'm stuck with actually using it further.
View 5 Replies
View Related
Jun 5, 2008
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do:
I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View 4 Replies
View Related
Feb 26, 2014
I have a data set that has invoice amounts with corresponding bill date range. I need to get those invoice amount auto pop up in correspond month columns.
Invoice Number Bill From/Bill To Invoice Amount Dec '13 Jan '14 Feb '14
1 01/01/2014 00:00 $100
01/02/2014 00:00
2 12/30/2013 00:00 $200
12/30/2014 00:00
3 01/01/2014 00:00 $300
01/02/2014 00:00
View 14 Replies
View Related
Jun 8, 2009
I would like some help from someone on this subject if possible. I am running a stats report in a workbook where each member of staff have their own running totals of how much work they do and how much of that work is incorrect (per week). I have worked out that if I use the following:-
=SUMPRODUCT(('Barry Brooks'!$A$1:$A$2000>=$B$95)*('Barry Brooks'!$A$1:$A$2000<=$C$95))
I get the total amount of work. To explain the above, it returns the amount of times a date appears between two dates i.e B95 is week commencing date and C95 is weekending; therefore giving the total amount of work in that period.
What I am struggling with is that I need a formula to look at the above date range and then look at another column that has either a ‘Y’ or ‘N’ (for yes or no) and for the formula to count how many N’s there are (thus how many in that given range there were)
It appears to me quite a small ask for Excel but I can’t seem to get it to work.
View 6 Replies
View Related
