I am attempting to create a few control textboxes to be present in my Excel worksheet to use with a VBA macro but for the life of me I cannot figure out how to do this in Office 2007. I can create normal textboxes but cannot figure out how to get textboxes using the design toolbar (I can't get the toolbar either).
View 4 RepliesI often use the .TAG property on controls as a sort of temporary container to hold variables, arrays and such but this gets messy because I sometimes forget which control I used for what since there appears to be only 1 tag property per control. Are there any controls that have numerous .TAG like properties I could use (even name) to hold my temp data?
Excel 2007 and 2010
Additional Controls Dialog Box refuses to display
I have a problem trying to add additional controls to the Controls toolbox
The two methods I've tried
1. Right click on the controls toolbox , click Additional controls
2. Menu, Tools, Additional controls
Neither of the above produce a dialog box containing the list of additional controls to choose from.
I am running Excel 2007
I've created a custom ribbon which contains checkboxes that hide or show columns.
I would like to change the enable state of the checkboxes while the user is interacting with the spreadsheet.
For example:I would like to disable all of the checkboxes if they are not viewing sheet1I would like to disable the second checkbox if the first checkbox is unchecked.
I know how to set these all on initialize. I just have not figured out how to update these controls after it has been opened.
I have two worksheets (Sheet1 and Sheet2).
For example I have three columns named Name, City and Telephone.
UserForm1 has three textbox(TextBox1, TextBox2 and TextBox3).
All three textboxes data populated from sheet1 (Name, City and Telephone) by selecting a comboBox.
The code is below... and which is working fine.. The problem is in my next code. I am trying to amend data in all worksheets but it is not working.
Private Sub ComboBox1_Change()
Dim strNamedRange As String
Dim lRelativeRow As Long
With ComboBox1
If .ListIndex > -1 Then
strNamedRange = .RowSource
'ListIndex starts at zero
We are using Windows7 with Excel 2007. We have old code from excel 2003 and earlier that was adding a msoControlPopup with other sub-controls using the code below:
Code:
Set HelpMenu = CommandBars(1).FindControl(Id:=30010)
If HelpMenu Is Nothing Then
' Add the menu to the end
[Code].....
I tried going to Excel Options>Customize>Reset to reset any customizations to the quick access toolbar as this was recommended by something else I found online. This did not fix the problem.
I can find the control in the Immediate window but it just isn't showing in the add-ins tab. if I can find and repair that XML file perhaps?
I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
I'm a novice using Excel 2007 at work and some of my worksheets have vanished.
On Friday I opened up an existing single-sheet workbook; while I was working on it I renamed the original sheet and added two new sheets. Obviously, I saved everything before I shut the file.
Today I've opened up the workbook and the two new sheets have vanished. Strangely, the original sheet has reverted to its original name (also the name of the workbook), but the changes I made to the data on Friday remain. The Properties window indicates there is only one sheet in this workbook, and confirms that the last save was made at the end of Friday.
The workbook is saved as an Excel Comma Separated Values file. I don't know if this is relevent.
I'm trying to loop through worksheets as follows:
If ws.Name "DataTable" And ws.Name "Summary" Then ws.Activate
code to do some copy/paste stuff ....
Next ws
Try as I may, I can't get the code to skip the worksheets named "DataTable" and "Summary". Based on other posts, I've tried swapping out the And for an Or. Also tried using LCase(ws.Name), to no avail. Note that I'm acually trying to skip several other sheets as well but only listed two here for simplicity.
I'm using Excel 2007.
i have an excel 2007 spreadsheet where i keep baseball stats. On the pitching side have a column for the pitchers innings pitch. The data kooks like this:
1.0
1.1
1.2
where the numbers after decimal points represents thirds of an inning.
In my spreadsheet i have 4 workheets of different divisions that have a breakdown of each team the team i am keeping stats for plays.
i manually enter the innings pitched in the totals for the season as i cannot figure out how to add these numbers from the individual worksheets to calculate the right number. once the number after the decimal point is greater than two than another full inning is recorded not a continuation of the number.
Example pitcher has already pitched 2.2 innings and he pitches 1.2 innings today making a total of 3.4 which should really be 3.1 one last one pitcher has pitched .2 innings and pitches .1 today making a total of .3 innings pitched but it should be 1.0 innings pitched. proper formula to sum the correct totals in the totals worksheet. i am at a loss and ihave been working on this problem for a little while with no luck.
I have a workbook with 4 sheets and with sheet 5 as a "consolidated" sheet. I have to create the macro, which will on a daily basis copy the populated data from those 4 sheets and paste into the sheet 5 (same workbook). The data in the Sheet 5 should be pasted from row 2 below each other.. Row 1 will be the headings and shouldn't be replaced. The data in all 4 sheets should be copied from row starting 37, columns C to BA but it will end with different row numbers. note that columns A & B are populated but shouldn't be copied.
View 7 Replies View Relatedvery basic Excel user (using Excel 2007). Trying to see how I can use the VLookup function from multiple worksheets to get an average. I know it can be done, but just not sure how to go about doing that. My spreadsheet is attached - basically what I want to do is to get an average for the individuals listed in the "Consensus" tab for the figures that appear in Worksheets "1", "2" and "3".
View 14 Replies View RelatedI have a workbook that has 5 worksheets. Worksheet1 is the Summary tab, Worksheets 2-5 contains data all sitting under the same headings and formats however vary in row number e.g.
Worksheet 2 - 63000 rows
Worksheet 3 - 48000 rows
Worksheet 4 - 23000 rows
Worksheet 5 - 21000 rows
In Worksheet 1 Column AQ contains a Cost Centre number which I would like to extract the parent description of in Column BI of the same Worksheet and then the child description into Column BJ. Worksheet 1 currently has 16000+ rows and grows daily.The location of the Cost Centre in Worksheets 2-4 is contained in Column A and the Parent Description in Column W and the Child Description in Column Y.I am currently using this INDEX MATCH formula to search all worksheets but as you can imagine it's tediously slow and needless to say sometimes not reporting/updating the values correctly likely because it's frozen.
=VLOOKUP(AQ2,INDIRECT("'"&INDEX(Sheet1!$A$1:$A$4,MATCH(TRUE,
COUNTIF(INDIRECT("'"&Sheet1!$A$1:$A$4&"'!A2:A63355"),AQ2)>0,0))&"'!A2:W63355"),23,0) this looks up Cost Centre in Worksheet 1 Column AQ and returns the results from Column W in Worksheets 2-4 to Worksheet 1 Column BI
[code]....
using Excel 2007. I need a code to identify a worksheet within a workbook by cell/range value. The book is used by various users. They have the rights to add new sheets and all but delete columns in the 'master worksheet'. The sheet names can be changed by the user but I need to rename the master sheet on opening the file. To do this I have put a specific value in a cell within the master worksheet which then should allow me to find the sheet and rename it. (let say Range A1 has a value of "this sheet") I have a mental block on how i can run a loop to search each sheet for the identifying value until the range and value is found and the sheet identified
View 5 Replies View RelatedI am using Excel 2007. I have a population that I used to create a pivot table. I am currently double clicking on the value cells to create worksheets of only particular "row label" categories. I am then copying the "row label" information into the newly generated work sheet name tab. This works fine when I only have a few "row label" categories to do but it is tedious if there are many categories.
Is there any way to automate the creation of work sheets for all row label values and also naming each work sheet tab with it's respective row label information. Here are images of the pibot table and the type of work sheet I would like for wall row label values.
I'm trying to update a the summary sheet that will run through the 10 worksheets and bring back the entire row (or the columns I specify) that matches the creteria MS.
MS will appear against each row in the same column in all the tabs.
So in the summary sheet I would see all the rows individually that appear in tabs 1-10.
Excel 2007.
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
View 2 Replies View RelatedIn Excel 2007, Windows 7 Home Premium, I am trying to summarise multiple worksheets into one sheet, creating a list in one column in this summary sheet that includes the cell contents from the same cell from each sheet. For example, my first sheet is called KCD183 and I want to list the value from KCD183 Cell A2 in my Summary Cell A2, then show KCD184 Cell A2 in Summary Cell A3 (i.e. the next row down). So my Summary sheet will list all cell A2s from all my sheets, 1 after the other down column A and will continue to add these for any new sheets I add.
I realise that I could just export the spreadsheet to Access and report on it from there, but I don't have the software!
I have an Excel Spreadsheet (2007) that contains over 500,000 records that shows Electric meter usage per month over a 24 month period per meter. What I want to be able to do is to select a meter row per number and copy is to it's own worksheet. At the end - I want to be able to have a seperate worksheet per electric meter number - that I can create a graph. If I go through all 9000 meters and copy and paste into a different worksheet - it will take me weeks to do manually. How can I do this automatically?
View 1 Replies View RelatedI created a form using multiple text boxes and combo-boxes using Excel VBA controls but do not know how to enable the ability to tab between those boxes. "Auto Tab" doesn't seem to do it.
View 9 Replies View Relatedi've been scrolling through the Uerforms extra controls and just wondered if there is a comperhinsive list of them and what they actually do?
View 2 Replies View RelatedI have added subtotals to a worksheet, as I have many times before, but this time I don't see any controls off to the left. I am at a loss as to why this might be happening or how to get them to display. Have I toggled something off or on that might be causing this?
View 4 Replies View RelatedIn line me.controls(0) what (0) stands for?
I thought it's for tabindex but after experiment it's not.
Can you run a procedure when a particular page in a multipgae control is clicked rather than use the Multipage change control.
View 5 Replies View RelatedMy excel macro's run fine under Windows 2000 Pro, and Office 2000. The company got a new computer with Windows XP. I now have macros that run OK however I keep getting a pop up message stating. Warning..An active X component is being loaded. I must press OK and the program will run fine. How can I get rid of the Pop up active X message.
View 2 Replies View Relatedway of setting the values of textbox controls, the way im using below is very repetitive and has to be run through every time a combobox1 is changed. Im also going to have to add a lot more case scenarios in the short future.
Private Function setform()
Dim Xeng As Boolean
For Each ctl In Me.Controls
If TypeOf ctl Is MSForms.TextBox Then
ctl.Enabled = True
ctl.Locked = False
ctl.Value = ""
End If
Next
I have a ListBox in my worksheet "A", and I'm tryin to acces to it... I want to use that ListBox like a log to print the error i have found while running my code. The name of that ListBox is "IncongruenciesListBox".
now if that ListBox was in a userform, i can access to it easily, but if it is in the worksheet how can i change (add more rows) to it?
I tried:
Dim WS As WorkSheet
Set WS = ThisWorkBook.WorkSheets("A")
If added = False Then WS.IncongruenciesListBox.AddItem ("error")
And there is a message saying it cant find "IncongruenciesListBox".
I have a userform that has nested multipages (5 in the outer page, 4 in the inner page).
On each of these multipages, I want to have the same controls (sliders) laid out in the same order - but with unique names, named after their tab location, for each control so I can use their value property later in the code.
I've designed the layout and named all the controls on my first sheet (e.g. Slider1Outer1Inner1). I now need a way of automating the replication of these across the other 19 sheets (including the nested inner multipage!); so that equivalent slider for example would be called Slider1Outer1Inner2, Slider1Outer1Inner3 etc.
I'm not sure about coding VBA to act on items within VBA...
VB:
" For each multipage in outer
For Each multipage In inner
For Each Object In current multipage
Copy inner.object -> Next multipage
Inner.object.name = CurrentOuter & CurrentInner & CurrentSlider "
I have a spreadsheet with numerous check boxes. Everything looks great when I do a "print preview", but after I close the preview and return to the spreadsheet, a bunch of the check boxes have moved! Have I got a property improperly set, or is it something more sinister? I've looked all over, and can't find an explanation of what the various property settings mean...
View 8 Replies View RelatedI have a userform that as lots of text boxes on.
The text boxes are called "pos1" & "skill1" the number ranges up to 18.
I am trying to put the contence of the boxes on a worksheet using a loop so the 1 will change to 2 and so on.
How do I go about seting the loop up so it changes the name of the control each time.