Add Exception To Sumif Formula
Oct 19, 2006
I have a workbook setup to give me the nutritional break down of all of the foods I consume. I can get the subtotal of each day. What I need is to also get the subtotal of each meal. I can't seem to get this meal subtotal without adding it to the daily total twice (once in the listing and once in the subtotal). I was thinking of trying to add an exception to the sumif formula in columns I, K & M but I don't know if that is possible. I have included a cut down version of my workbook to illistrate the problem. I will gladly supply a full vertion to anyone who would like a copy for thier own use.
View 5 Replies
ADVERTISEMENT
May 17, 2006
I am trying to get 2 different formulas to run depending on the value of the 2 cells.
Example: if cell "A" is equal to cell "B" then one formula, if it is different than a second formula.
I hope I did this right, if not please let me know and I will ask the question in a different manner.
View 7 Replies
View Related
Oct 25, 2007
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies
View Related
Oct 2, 2009
I have code that selects chart source data by searching the header row for dataTyp (in this case the dataTyp will be set to "IMP"). The target header cells look like "IMP 100Hz", "IMP 400Hz", "CAP 100Hz", "CAP 400Hz" etc. recently I inserted an averaging column at the end of each group of data columns. The headings for the new columns look like: "IMP AVG" "CAP AVG" etc. I need to exclude the ...AVG column from the source data selection. Code snip:
View 2 Replies
View Related
Apr 11, 2009
I attached the extract. I am having the issue in the Total Workbook. Specifically, the Tax and Debit Column. If a company is on both workbooks (Insider Processor, Outsider Processor). The Tax and Debit should be charged once in the Total Workbook. But i don’t know how to get this happening
View 6 Replies
View Related
Feb 27, 2007
I am trying to write a macro that looks at columns C-I in row 6, to check if the value is G, if it is then I want it to delete C5,6,7 & 8 and so on along to coumn I. So all that I am left with at the end of the macro are the values that weren't green without any blank gaps in the columns. I started using the following
If C6 = G Then
Range("C5:C8").Select
Selection.Delete Shift:=xlToLeft
End If
And using that same code for D6, E6 etc etc, but obviously, when it deletes the cells it shifts them left so the columns change values, so if C6 is equal to G then it deletes it but then what was D6 becomes C6.
View 2 Replies
View Related
Feb 15, 2014
If Cell value in "C36" or "D36" is Yes, then a picture will be displayed (either Picture 1 or Picture 2). If Cell value is No, then the pictures won't be displayed.
The code I use:
[Code] .....
By default, all pictures on the Excel sheet are invisible.
My problem is, there are 3 pictures I'd like to display at all time because they are part of the document's decoration.
Therefore, I'd like to add an exception for the Picture A, Picture B, Picture C so they are not affected by the command "Me.Pictures.Visible = False".
View 3 Replies
View Related
Oct 20, 2008
I am using the below code to force a range of cells to change to Upper Case, what i am after is an exception to the rule for example the words Pick Up i don't want to force to upper case, is there VBA i can add to the below to achieve this?
Private Sub Worksheet_Change(ByVal Target As Range)
''''''''''''''''''''''
'Forces text to UPPER
''''''''''''''''''''''
If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub
On Error Resume Next
If Not Intersect(Target, Range("w6:w299")) Is Nothing Then
Application.EnableEvents = False
Target = UCase(Target)
Application.EnableEvents = True
End If
On Error GoTo 0
End Sub
View 9 Replies
View Related
Jul 6, 2014
I have a big Excel file that is supposed to be used by many users and therefore I need some cells locked. But problem is I use these cells in my vba codes which the users must be able to run by using the buttoms in the file. But now I get error in every macro since the cells the code are trying the reach is locked. Can I make an exception for vba codes in some way so that I can run my macros?
View 4 Replies
View Related
Mar 25, 2014
why a macro that works without a problem in Excel 2010 now crashes Excel 2013. The error produced says 'Automation Error Exception Occurred'. If I place a stop in the code and hold the F8 key down, the code runs perfectly (Excel 2013) but if I run it, it will crash. The code is copying a worksheet into a new workbook, adding 2 more worksheets, saving then emailing the workbook before closing. It goes through the routine about 7 times before crashing (sending only 7 email out). It's something to do with the email because I can bypass that code and it runs that part without a problem.
Our office just upgraded all the computers to Office 2013 and I've got to get this macro running again. I had to email 100 reports one-by-one today and I didn't like it.
View 6 Replies
View Related
Mar 25, 2014
Currently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is
Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).
[Code] .......
Above is my item master
Data to check
[Code] ........
Example case: 1
Checking first row of data check
Article number: 2-50660147
Color code: 6
Size: M
Result: "Wrong size"
But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.
View 9 Replies
View Related
Aug 26, 2009
Can anyone tell me why this formula is not working?
=SUMIF($D$6:$AL$6,"=TM Goals",D12:AL12)
The entry under cell T12, which I am hoping this formula will pick up is based on the following formula.
=IF(E12="A",$L$5,"0")
View 12 Replies
View Related
Jan 18, 2009
I am trying to sum a column if Col B is equal to "TM" & Col A is equal to "Launch" then sum Col H. I am sure it can be done and I am hoping the right person reads this posts and enlightens me.
View 9 Replies
View Related
Dec 19, 2006
I come across a spreadsheet that is using DSUM formula, I did not understand why someone used DSUM instead of SUMIF formula, because using DSUM formula they had to use two extra cells for criteria, as seen in this example.
I like to know is there any advantage of using DSUM instead of SUMIF in this example.
The formule they used is =DSUM(J109:K113,2,$M$2:$M$3)
and the criteria is G,D
so they are adding all Debits in that column.
I changed the formula to =SUMIF($J$110:$J$113,"D",$K$110:$K$113)
that of course does not need $M$2:$M$3 range criteria.
G 3458224.37
D 3401317.50
C 3401317.50
C 56906.87
D 56906.87
View 9 Replies
View Related
Apr 21, 2014
i am using "sumif" formula in cell C5 and C10, the next step is to add up these two cells (sum up the figures of "sumif"), then the answer will be +15+6=21, how to do with using single formula.
View 7 Replies
View Related
Dec 28, 2013
I need a formula which can sum the mode of payments separately occurring on different dates.
See the attachment. It is like
table 1
date cash credit card
1-1-14
2-1-14
3-1-14
table 2
product booking date booking amount payment date payment amount form of payment
a 1-1-14 100 2-1-14 100 credit card
b 1-1-14 150 3-1-14 150 cash
c 2-1-14 200 3-1-14 200 credit card
I want to add value in table 1 from table 2. In front of date CELL Both cash and credit card amounts should appear separately.
Book1.xlsx‎
View 11 Replies
View Related
Feb 23, 2014
Below is my formula that works for a specific date. F$8 is the date.
How could I change this if I want data b/w two time periods.
>=F$6, and <=F$8?
[Code] ....
View 3 Replies
View Related
May 14, 2009
The section I have highlighted in orange has three ranges added together how would I show this in a simplified formula?
=sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$85:$GA$85)+sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$44:$G A$44)+sumif(DailySalesAnalysis!$C$1:$GA$1,A25,DailySalesAnalysis!$C$41:$GA$41)
View 2 Replies
View Related
May 30, 2009
The following formula finds the lowest five values in row 6 from column H to W. However if there are less than five values in the row the formula returns 0. I need to tweak it to return the smallest 5 values weather there is one or a full row of 16. Also if there are any of the same values I still want only the five lowest.
View 2 Replies
View Related
Jul 24, 2009
is there away to do the sumif formula with 2 criteria? See attachment
View 3 Replies
View Related
Aug 24, 2009
a1=good
a2 = 100
b1 = bad
b2 = 50
c1 = good
c2 = 100
would like to sum a2+b2+c2 only if a1,b1,c1 = good.
View 6 Replies
View Related
Sep 29, 2009
I'm trying to do what I think its a simple formula with Excel 03 but can't get it to work. The info is in two work sheets - A&B.
[code]WORKSHEET A WORKSHEET B
A COLUMN 1 COLUMN 2 COLUMN 3 COLUMN1 COLUMN 2
B BLANK BLANK 10 BLANK DATE:1/28/09
C NAME DATE WORKED 12 NAME
D Jones 1/2/09 13 Bell
E Smith 1/6/09 12 Smith
F Cox 1/28/09 12 Cox
G Cox 1/28/09 10 Collins
H Collins 1/28/09 11 Jones
In worksheet B, Column 2, I need to pull the SUM of COLUMN 3 IF THE NAMES IN BOTH MATCH AND THE DATES MATCH
I've spent hours tyring to get this thing done!
View 11 Replies
View Related
Jan 27, 2010
The below formula is giving the desired result and everything seems fine. Need if there is an alternative formula which can give same result in more refined and simplified manner. =K28+SUMIF($E$3:$E$24,$E$7,$D$3:$D$24)/(K23)-SUMIF($B$3:$B$24,$B$8,$D$3:$D$24)/(K23). The formula is based on the following data:
K28 = Last month balance
Column E = Type of expenditure
Column D = Values
Column B = Payments
K23 = Currency conversion rate
View 2 Replies
View Related
Feb 5, 2013
I am new to using SUMIF. I successfully wrote a formula telling it to sum one column for each row in another column where it equal "Forecast*". Now, I want to write a formula that says to sum a column for everything in the other column that does not equal "Forecast*". I tried using , but either it did not work, or I did not use the right syntax.
View 5 Replies
View Related
Apr 20, 2007
It's been awhile since I've used excel formulas so I'm very rusty but I need to count the number of times I see a particular item in a list as long as it has another criteria as well. Example List and Result are below: I want to count the number of AAA Rewards that Alex has....
List
#DateEmployeeAmountReward Type
14/17/07Alex$5.00AAA Reward
24/19/07Joe $10.00AAA Reward
34/19/07Alex $5.00 Store Certificate
44/20/07Alex $10.00 AAA Reward
Result
Employee # AAA Reward Amount # Store Certificates Amount
Alex
Brian
Joe
View 12 Replies
View Related
Jan 8, 2009
I have columns A and B, and want to add values in column B based on corresponding criteria in column A. The criteria is if the first two characters in the string in column A = 15.
The only way I can think to do this is with LEFT, but LEFT asks for a specific string, and I want to evaluate each cell in a column. So I could write
=sumif(A:A,"LEFT(A:A, 2)=15",B:B)
but of course that doesn't work.
View 9 Replies
View Related
Jan 28, 2009
The value in A1 can range from 0-10. If the value is 0 I need the result to be 0, if the value is 1-10 I need the result to be the number multiplied by 613.35 plus 29.35 for example =sum(1*613.35)+29.35 or =sum(2*613.5)+29.35.
View 9 Replies
View Related
Jan 30, 2009
How do I modify my formula (below) to include an OR statement?
=SUMIF(I4:I20,"Core",G4:G20)
I need something like this:
=SUMIF(I4:I20,"Core" or "Existing",G4:G20)
View 9 Replies
View Related
Sep 11, 2003
All I believe Juan Pablo posed a quick little diddy on how to have the SUMIF ignore #N/A?? I promised myself I would remember it but here I am asking if anyone remembers it or know how to have Excel add up a column even though the column contains #N/A's.
View 9 Replies
View Related
Apr 13, 2007
Is there a way to use sumif on blank cells. That is I only want to add the contents of column Q provided the Column I corresponding rows are blank. I used this formula but it didnt work =sumif(I:I,ISBLANK,Q:Q)
View 5 Replies
View Related