If Cell value in "C36" or "D36" is Yes, then a picture will be displayed (either Picture 1 or Picture 2). If Cell value is No, then the pictures won't be displayed.
The code I use:
[Code] .....
By default, all pictures on the Excel sheet are invisible.
My problem is, there are 3 pictures I'd like to display at all time because they are part of the document's decoration.
Therefore, I'd like to add an exception for the Picture A, Picture B, Picture C so they are not affected by the command "Me.Pictures.Visible = False".
I have an workbook with pictures that are linked to external picture files, and they are placed in the workbook via macro. When I email the file to another computer and open it, the pics do not display and show an error:
The linked image cannot be displayed. The file may have been moved, renamed, or deleted, Verify that the link points to the correct file and location.
I would like to be able to save the workbook with the pictures in them (without having to archive them) so that I can open it and see them on another machine.
I had a macro that worked perfectly by inserting pictures into named ranges throughout the sheet depending on user input. However when I switched to Microsoft Excel 2007, the pictures all go into one cell.
My code looks like this:
Application.ScreenUpdating = False
Dim picnme As String Dim rng As Range Dim ArrImg Set rng = Range("B5") picnme = Range("B5")
I only copied in a section of it bit it gets rather repetitive. There are over 50 pictures that get inserted into the spreadsheet and it worked fine in the prior version of excel.
I have code that selects chart source data by searching the header row for dataTyp (in this case the dataTyp will be set to "IMP"). The target header cells look like "IMP 100Hz", "IMP 400Hz", "CAP 100Hz", "CAP 400Hz" etc. recently I inserted an averaging column at the end of each group of data columns. The headings for the new columns look like: "IMP AVG" "CAP AVG" etc. I need to exclude the ...AVG column from the source data selection. Code snip:
I attached the extract. I am having the issue in the Total Workbook. Specifically, the Tax and Debit Column. If a company is on both workbooks (Insider Processor, Outsider Processor). The Tax and Debit should be charged once in the Total Workbook. But i dont know how to get this happening
I am trying to get 2 different formulas to run depending on the value of the 2 cells. Example: if cell "A" is equal to cell "B" then one formula, if it is different than a second formula.
I hope I did this right, if not please let me know and I will ask the question in a different manner.
I have a workbook setup to give me the nutritional break down of all of the foods I consume. I can get the subtotal of each day. What I need is to also get the subtotal of each meal. I can't seem to get this meal subtotal without adding it to the daily total twice (once in the listing and once in the subtotal). I was thinking of trying to add an exception to the sumif formula in columns I, K & M but I don't know if that is possible. I have included a cut down version of my workbook to illistrate the problem. I will gladly supply a full vertion to anyone who would like a copy for thier own use.
I am trying to write a macro that looks at columns C-I in row 6, to check if the value is G, if it is then I want it to delete C5,6,7 & 8 and so on along to coumn I. So all that I am left with at the end of the macro are the values that weren't green without any blank gaps in the columns. I started using the following
If C6 = G Then Range("C5:C8").Select Selection.Delete Shift:=xlToLeft End If
And using that same code for D6, E6 etc etc, but obviously, when it deletes the cells it shifts them left so the columns change values, so if C6 is equal to G then it deletes it but then what was D6 becomes C6.
I am using the below code to force a range of cells to change to Upper Case, what i am after is an exception to the rule for example the words Pick Up i don't want to force to upper case, is there VBA i can add to the below to achieve this?
Private Sub Worksheet_Change(ByVal Target As Range) '''''''''''''''''''''' 'Forces text to UPPER '''''''''''''''''''''' If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub
On Error Resume Next If Not Intersect(Target, Range("w6:w299")) Is Nothing Then Application.EnableEvents = False Target = UCase(Target) Application.EnableEvents = True End If On Error GoTo 0
I have a big Excel file that is supposed to be used by many users and therefore I need some cells locked. But problem is I use these cells in my vba codes which the users must be able to run by using the buttoms in the file. But now I get error in every macro since the cells the code are trying the reach is locked. Can I make an exception for vba codes in some way so that I can run my macros?
I have created a macro 'uid' and rename the module to 'profession'. In the list of macro 'alt + f8' the name displays 'profession.uid' which confuse me. I want to display the name 'uid' and not 'profession.uid'. I select the macro by pressing the first letter of it as in this case 'u' and reach that macro and click it to run.
why a macro that works without a problem in Excel 2010 now crashes Excel 2013. The error produced says 'Automation Error Exception Occurred'. If I place a stop in the code and hold the F8 key down, the code runs perfectly (Excel 2013) but if I run it, it will crash. The code is copying a worksheet into a new workbook, adding 2 more worksheets, saving then emailing the workbook before closing. It goes through the routine about 7 times before crashing (sending only 7 email out). It's something to do with the email because I can bypass that code and it runs that part without a problem.
Our office just upgraded all the computers to Office 2013 and I've got to get this macro running again. I had to email 100 reports one-by-one today and I didn't like it.
Need help with this file, i did most of the code but cant figure out some bugs i am having.
CTRL-SHIFT-F runs the macro,
the problem i am running into is ,
1), i have the macro looking up the legend in row 3 in the factory install tab, and having it find this legend in the T1 Verbiage file. Once found i want all of the data in the column of that legend pasted in row 12.
I currectly have the macro pasting the legend verbiage according to the legend in row 3 correctly but it leaves out some rows. Can someone look at the code and find out why its leaving out some rows of verbiage?
Next i have certain requirements of where Capital E's should go, where routine maintanence should go ect. I have that at the end of the code and is correct.
The problem here is with this part. ( starts at row 12, counds all of n which is the verbiage rows, then adds 8. So in other words this formula needs to be 8 rows after the verbiage ( which is dynamic depending on the legend ) ....
Currently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is
Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).
[Code] .......
Above is my item master
Data to check
[Code] ........
Example case: 1
Checking first row of data check
Article number: 2-50660147
Color code: 6
Size: M
Result: "Wrong size"
But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.
I'd like to report an obscure bug in Microsoft's MSForms. ListBox support that has had me tearing my hair out for several days. I started getting a totally useless error message everytime I popped up a very simple dialog to select a Vendor from a list (in a ListBox, of course). The (useless) error message was titled "Microsoft Forms" (okay I could have guessed that - not too helpful), and the message (after the typical error icon - exclamation mark in caution sign) was "Exception occurred." (how helpful is that?!?!)
The debugger was not invoked, and the dialog/UserForm was frozen except for the scrollbar on the ListBox, any control clicked on (there were only the ListBox, OK and Cancel buttons) popped up the same error. Even closing the UserForm popped up the error message once before finally closing the UserForm. No breakpoints were triggered in any event handler for any of the controls, including added error event handlers for each control (and the UserForm istelf).
This dialog (or UserForm) had been working perfectly earlier in my development of this project, so I found it very frustrating when I started getting this error. Since I had no debugging clues (other than what I realized when it was finally resolved, with my 20/20 hindsight), I tried many things to deteremine where the problem was. When I copied the form to a new workbook, the problem disappeared, until I started copying in other controls and/or modules or workbook/worksheet procedures. However, I couldn't see anything in these other procedures that was causing the problem and they were all working just fine for themselves......
i am using the macro below to get excel to hide all sheets but the one called "open"...
PHP Sub savemini()
ActiveWorkbook.Unprotect "letmein"
For Each sh In ThisWorkbook.Worksheets If Not sh.Name = "open" Then sh.Visible = xlVeryHidden Next sh
ActiveWorkbook.Save End Sub
So the workbook is protected with the password "letmein", and the VB code above in theory should unlock the workbook, allowing all visible sheets to be hidden with the exception of the sheet called "open". Then is saves the file.
Now heres the odd bit... it works for certain people, but not for others. I have made sure those it wont work for are not doing anything weird and they are not.
The workbook i am using has a code that only opens certain sheets for certain users. I as a master user have access to all sheets. I can go into the users sheets and click the button that activates the macro above myself and it works fine, but for some users it wont work.
1. I added pictures(print screen-->mspaint-->cut existing part of the image-->paste into excel. In excel they are called "Pictures 01 thru Picture X" with the pull points all around. 2. I located them in specific cells of the grouped type with the (-) sign appears so the group of cells are in use 3. When I close the Group(+) of cells all the pictures are jumbled above the closed cells.
Question: Is there away to keep these pictures within those cells when closing the group, so they will not been see as well?
is you had two ratings, one bad, one good, could you make a differant picture show up for the differant ratings using an IF function or simmiler fuctions (So like if a 'dance rating' is bad if it is under 13 and is good over 13 then have a picture of John Travolta for good and a picture of a hippo for bad as a bit of a joke on a identinty card sort of thing)?
I know quite alot about exel and have tried to make my formular but as it is saved on the school server i can not acsess it until tomorrow but i will try and make that work and post it if it dose
I have imported and deleted several pictures into my worksheet. I want to re- name or re-order my pictures. Right now, a new pictures is name "picture 4" when there might only be two pictures in the sheet. I want to rename to say "picture 2" as I have a macro that calls for "picture 2" I know this should be simple, but I don't know how to do this.
since my pc has updated to ie7 all pictures that I open via hyperlinks from excel now open in and internet explorer window instead of windows picture & fax viewer as JPEG's are set to.
If I open the JPEG files directly they open with the correct program.
I'm sure it must be a setting somewhere but I cant find it.
I have a worksheet into which have been imported a number of pictures, The pictures have all been imported and sized to appear to fit into cells. I have a program which deletes all of the pictures in one go but I would like to be able to just delete all those in one row. I'm not sure how to address the row as I believe pictures are objects sitting on top of the sheet and not actually in the cells What I have tried is:
I am absolutely new to visual basic thing but have a good idea of what I am doing in excel. I have seen some code to delete pics but can't figure out what it is that I am suppose to do. What I am doing is coping and pasting something from the internet. I do not need any of the pics that are pasted into the worksheet and am tired of deleting them individualy.
My macro suppose to loop on every charts in the workbook and change them to pictures , I'm using the Pastespecial method to do it but sometimes I'm getting a 1004 error in the line that do the paste command. Is there is a better way to do it? ..........
I am having some trouble with the vba code I'm using to reference pictures. Now please bear with me, I'm don't know vba whatsoever and am copy/pasting what I found on the internet.
The spreadsheet in question is attached....
The issue:
I am trying to show a picture based on the inputs in the cells above. Basically the picture in cell A28 is referenced by the information in cell AI7. The picture in cell D28 should be referenced by the information in cell AI8 and so on.
The problem is that when I enter the code to insert multiple pictures, it comes up with errors.
I'm hoping this is just my lack of programming knowledge and this is an easy fix. Please tell me where I am going wrong.
Also, will there be an issue if I reference the same picture multiple times?
