Find With Exception

Oct 2, 2009

I have code that selects chart source data by searching the header row for dataTyp (in this case the dataTyp will be set to "IMP"). The target header cells look like "IMP 100Hz", "IMP 400Hz", "CAP 100Hz", "CAP 400Hz" etc. recently I inserted an averaging column at the end of each group of data columns. The headings for the new columns look like: "IMP AVG" "CAP AVG" etc. I need to exclude the ...AVG column from the source data selection. Code snip:

View 2 Replies


ADVERTISEMENT

Summing Column With Exception

Apr 11, 2009

I attached the extract. I am having the issue in the Total Workbook. Specifically, the Tax and Debit Column. If a company is on both workbooks (Insider Processor, Outsider Processor). The Tax and Debit should be charged once in the Total Workbook. But i don’t know how to get this happening

View 6 Replies View Related

Making An Exception Formula

May 17, 2006

I am trying to get 2 different formulas to run depending on the value of the 2 cells.
Example: if cell "A" is equal to cell "B" then one formula, if it is different than a second formula.

I hope I did this right, if not please let me know and I will ask the question in a different manner.

View 7 Replies View Related

Add Exception To Sumif Formula

Oct 19, 2006

I have a workbook setup to give me the nutritional break down of all of the foods I consume. I can get the subtotal of each day. What I need is to also get the subtotal of each meal. I can't seem to get this meal subtotal without adding it to the daily total twice (once in the listing and once in the subtotal). I was thinking of trying to add an exception to the sumif formula in columns I, K & M but I don't know if that is possible. I have included a cut down version of my workbook to illistrate the problem. I will gladly supply a full vertion to anyone who would like a copy for thier own use.

View 5 Replies View Related

Exception - Deleting Only Certain Cells

Feb 27, 2007

I am trying to write a macro that looks at columns C-I in row 6, to check if the value is G, if it is then I want it to delete C5,6,7 & 8 and so on along to coumn I. So all that I am left with at the end of the macro are the values that weren't green without any blank gaps in the columns. I started using the following

If C6 = G Then
Range("C5:C8").Select
Selection.Delete Shift:=xlToLeft
End If

And using that same code for D6, E6 etc etc, but obviously, when it deletes the cells it shifts them left so the columns change values, so if C6 is equal to G then it deletes it but then what was D6 becomes C6.

View 2 Replies View Related

Add Exception To Macro Displaying Pictures?

Feb 15, 2014

If Cell value in "C36" or "D36" is Yes, then a picture will be displayed (either Picture 1 or Picture 2). If Cell value is No, then the pictures won't be displayed.

The code I use:

[Code] .....

By default, all pictures on the Excel sheet are invisible.

My problem is, there are 3 pictures I'd like to display at all time because they are part of the document's decoration.

Therefore, I'd like to add an exception for the Picture A, Picture B, Picture C so they are not affected by the command "Me.Pictures.Visible = False".

View 3 Replies View Related

Exception To Forcing Text To Upper

Oct 20, 2008

I am using the below code to force a range of cells to change to Upper Case, what i am after is an exception to the rule for example the words Pick Up i don't want to force to upper case, is there VBA i can add to the below to achieve this?

Private Sub Worksheet_Change(ByVal Target As Range)
''''''''''''''''''''''
'Forces text to UPPER
''''''''''''''''''''''
If Target.Cells.Count > 1 Or Target.HasFormula Then Exit Sub

On Error Resume Next
If Not Intersect(Target, Range("w6:w299")) Is Nothing Then
Application.EnableEvents = False
Target = UCase(Target)
Application.EnableEvents = True
End If
On Error GoTo 0

End Sub

View 9 Replies View Related

Making Exception For Locked Cells In VBA Codes

Jul 6, 2014

I have a big Excel file that is supposed to be used by many users and therefore I need some cells locked. But problem is I use these cells in my vba codes which the users must be able to run by using the buttoms in the file. But now I get error in every macro since the cells the code are trying the reach is locked. Can I make an exception for vba codes in some way so that I can run my macros?

View 4 Replies View Related

Excel 2013 :: Automation Error Exception Occurred?

Mar 25, 2014

why a macro that works without a problem in Excel 2010 now crashes Excel 2013. The error produced says 'Automation Error Exception Occurred'. If I place a stop in the code and hold the F8 key down, the code runs perfectly (Excel 2013) but if I run it, it will crash. The code is copying a worksheet into a new workbook, adding 2 more worksheets, saving then emailing the workbook before closing. It goes through the routine about 7 times before crashing (sending only 7 email out). It's something to do with the email because I can bypass that code and it runs that part without a problem.

Our office just upgraded all the computers to Office 2013 and I've got to get this macro running again. I had to email 100 reports one-by-one today and I didn't like it.

View 6 Replies View Related

Index And Match To Check Data And Provide Exception Results

Mar 25, 2014

Currently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is

Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).

[Code] .......

Above is my item master

Data to check

[Code] ........

Example case: 1

Checking first row of data check

Article number: 2-50660147

Color code: 6

Size: M

Result: "Wrong size"

But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.

View 9 Replies View Related

Obscure Bug In UserForms ListBox Support: "Exception Occurred"

Aug 29, 2004

I'd like to report an obscure bug in Microsoft's MSForms. ListBox support that has had me tearing my hair out for several days. I started getting a totally useless error message everytime I popped up a very simple dialog to select a Vendor from a list (in a ListBox, of course). The (useless) error message was titled "Microsoft Forms" (okay I could have guessed that - not too helpful), and the message (after the typical error icon - exclamation mark in caution sign) was "Exception occurred." (how helpful is that?!?!)

The debugger was not invoked, and the dialog/UserForm was frozen except for the scrollbar on the ListBox, any control clicked on (there were only the ListBox, OK and Cancel buttons) popped up the same error. Even closing the UserForm popped up the error message once before finally closing the UserForm. No breakpoints were triggered in any event handler for any of the controls, including added error event handlers for each control (and the UserForm istelf).

This dialog (or UserForm) had been working perfectly earlier in my development of this project, so I found it very frustrating when I started getting this error. Since I had no debugging clues (other than what I realized when it was finally resolved, with my 20/20 hindsight), I tried many things to deteremine where the problem was. When I copied the form to a new workbook, the problem disappeared, until I started copying in other controls and/or modules or workbook/worksheet procedures. However, I couldn't see anything in these other procedures that was causing the problem and they were all working just fine for themselves......

View 2 Replies View Related

Visible Sheets To Be Hidden With The Exception Of The Sheet Called "open". Then Is Saves The File

Sep 9, 2008

i am using the macro below to get excel to hide all sheets but the one called "open"...

PHP
Sub savemini()

ActiveWorkbook.Unprotect "letmein"

  For Each sh In ThisWorkbook.Worksheets
       If Not sh.Name = "open" Then sh.Visible = xlVeryHidden
   Next sh

    ActiveWorkbook.Save
End Sub 

So the workbook is protected with the password "letmein", and the VB code above in theory should unlock the workbook, allowing all visible sheets to be hidden with the exception of the sheet called "open". Then is saves the file.

Now heres the odd bit... it works for certain people, but not for others. I have made sure those it wont work for are not doing anything weird and they are not.

The workbook i am using has a code that only opens certain sheets for certain users. I as a master user have access to all sheets. I can go into the users sheets and click the button that activates the macro above myself and it works fine, but for some users it wont work.

View 9 Replies View Related

IF.. Contains...then: Search Through The Text String In That Cell And Find A Certain Word, Find And Retrn A Value

May 23, 2006

I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)

View 4 Replies View Related

Find Wont Find Existing Text When Columns/Rows Hidden

Oct 8, 2006

Attempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.

The error happens at this point: ...

View 3 Replies View Related

Find Format: Find Method And Combine It With A Countif Or Loop

Feb 20, 2007

I'm trying to use this Find Method and combine it with a countif or loop. Something that will count a number of occurences of a unique type of character. I'm looking to find all "F" characters in Bold, Italic and Size 16. Here's my find code that I'm trying to use. I can get it to work by itself but not along with a countif or loop.

Sub count_4()
Dim r As Range
Set r = Range("A1:A6")
With Application.FindFormat.Font
.Bold = True
.Italic = True
.Size = 16
End With
r.Find(What:="F", LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, searchformat:=True, MatchCase:=True).Activate
End Sub

View 4 Replies View Related

Find Formula (find Jobs With Split Names)

Aug 5, 2009

DSee the attached.

The current spreadsheets add up each persons totals by matching the name in each tab with the name of the person who won the job located in current orders tab.

BUT.....If two salesman pair up on up on a job then the formula doesn't recognise the joint name. eg Gary/paul in row 69 (current orders).

I need the totals to half the job and add it to the salesmans total accordingly. There is no 'Paul Tab' as he is our MD and doesnt have a target.

View 5 Replies View Related

Find, Meet Condition, Sum Range, Deduce, Find Next

Sep 23, 2007

i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)


columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .

View 9 Replies View Related

Find In VBA Code: Find Exact Match

Oct 9, 2006

I'm using the below VBA

Dim c, DataRow
With Data
Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues)
If Not c Is Nothing Then
DataRow = c.Row
End If
End With

Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like :

Favourite Hotel - London
Favourite Hotel - Cardiff
Favourite Hotel
Favourite Hotel - Birmingham

Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London).

How do i make it search for an exact match?

View 4 Replies View Related

Find (Using Find) Using Variables With Or Without Quotes

Sep 2, 2009

In the code below Dim "x" is a string, the string may or may not contain quotes ( "" ). I might search for a string like this:

The big brown fox
or like this:
The "big" brown fox

I just found out the string can not be found when it contains quotes as in my second example.

View 4 Replies View Related

Find The Formula That Is Used To Find These Numbers

Dec 26, 2009

The first 7 digit number is the input to a certain equation. This equation outputs the 7 digit number after the space.

Input (7146127) ==> Equation ( Unknown) ==>Output (2871082)

These are some data that I have ( inputs and outputs). I was wondering if there is anyway to find this equation. I can get more data if that helps in finding the equation.

71461272871082
53820056426572
61070709150530
75833373805331
55466908456008
49264716615511
12387558353260
20013928484175
67975657084961
38006283229553
68973249414920
65179634653276
66971872613128
59646203411273
69785611400836
58284602307740
64723009925464
57930863495088
58816593932906
62736335606616
52119154778580
60043359437317
61921553996320
51507747216899
13197956063818
64210347411256
65399671193442
55656585589500
55148886441637
30850639587521
69081133766387
54139417804940
53408393698534
62310293191095
30512556590168
14514168265124
89078208134056
85177364363577
68714858216023
17584065849687
52691521917548
9840524785846
59268687494601
89374963791119
45989738961270
65040033345415
15061518946940
55392084949214
45103824265242
84181944909073

View 9 Replies View Related

Find Dates With Find Statement

Mar 6, 2007

I have dates in column A (Source Dates) and Column C (Target Dates). All data is formatted as Dates. I want to find which dates in column A have a matching date in column C. When using the find statement within a For Each loop I can not find a date match unless I format the target dates as General. How can I use the Find Statement using dates without formating the target dates as General?

Option Explicit

Dim SourceDate As Range
Dim TargetDate As Range

Sub FindTargetDate()
Columns("C:C").Select
Selection.NumberFormat = "General"
For Each SourceDate In Range("A1:A32")
'MsgBox SourceDate
Set TargetDate = Sheet1.Range("C1:C7").Find(SourceDate, LookIn:=xlValues)

View 7 Replies View Related

Find Method To Find Nth Occurence

Jul 17, 2007

Private Sub cmdShowdata_Click()
Dim Tgt As Worksheet
Dim Source As Range
Dim wbSource As Workbook
Dim cel As Range
Dim rng As Range
Dim c As Range
Dim i As Long
Application. ScreenUpdating = False
Set Tgt = ActiveSheet
Set wbSource = Workbooks.Open("C:Documents and SettingsDesktopStaff Recoed 2")
Set Source = wbSource.Sheets(1).Columns(1)
With Tgt
.Activate
'clear old data
Range(.Cells(3, 2), .Cells(200, 5)).ClearContents
' Loop through names in column A
For Each cel In Range(.Cells(3, 1), .Cells(Rows.Count, 1).End(xlUp))
If Not cel = "" Then...................

The above vba command which is extract the data from the Other workbooks. It looks for the "Staff 001", "Staff 002"...these parameters to transfer the data to the worksheet. But, the "Staff 001" data must appear twice in each workbooks. If i use the above command, i only can extract the FIRST "Staff 001" average data. But SECOND "Staff 001" average data cannot extract. I know it may be use FindNext method to do this but i am not sure how to write it

View 5 Replies View Related

Find Cannot Find Existing Text / Value

Mar 5, 2008

i am trying to do a search and i came across this. In the excel file attached you will see 2 column. Now if you take copy and paste "sterling rd" which is standing alone into the crtl F search field. It wont find it.

I have played with the format (made both general), i have CLEAN, Proper the text and tried that didnt work either.

I dont know what else to try. I am working with access, with a much larger list, however the linking to excel wont work and i know there is some difference font or format that i am missing.

View 5 Replies View Related

Find Value On Row & Find Last Used Column Before Found Value

Mar 17, 2008

Dim ColNo As Byte
Dim LastCol As Byte

ColNo = Application.WorksheetFunction.Match("Column find", Range("sheet1!A1:Z1"), 0)
LastCol = Range("sheet1!b1").End(xlToRight).Column

But the below code errors?

Dim ColNo As Byte
Dim LastCol As Byte

ColNo = Application.WorksheetFunction.Match("Column find", Range("sheet1!A1:Z1"), 0)
LastCol = Range(Cells(1, ColNo)).End(xlToRight).Column

View 3 Replies View Related

Find A Group Of Unique Rows- Find Non-zero Value In A Column - Fill Column With That Value?

May 27, 2014

There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.

First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.

Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.

The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.

View 3 Replies View Related

Macro To Find A Word In A Sentence By Using The "FIND" Method

Dec 14, 2008

giving me a macro to find a word in a sentence by using the "FIND" method.
For example I have a sentence say "I am happy" in which I have to search whether any of 2 words say "Happy" or "Sad" is there or not. If the sentence contains any of these words, then that row has to be highlighted.

View 9 Replies View Related

Find To Find All Occurences

Nov 17, 2006

I can't seem to get the findnext to work. I can find the first instance but none after that. Here's my code.

Dim B As Range
Dim SheetNumb As Integer
SheetNumb = 1
Do While SheetNumb <= Sheets.Count
Sheets(SheetNumb).Select
If ActiveSheet.Name = "Page1" Then
Exit Do
End If
Set B = Sheets(SheetNumb).Cells.Find(" Mechanical", SearchOrder:=xlByColumns, LookIn:=xlValues)
If Not B Is Nothing Then
B.Activate
FindAddress = B.Address
Do
B = Sheets(SheetNumb).Cells.FindNext(B)
Loop While Not B Is Nothing And B.Address <> FindAddress
End If
SheetNumb = SheetNumb + 1
Loop

View 8 Replies View Related

Macro To Find Value From One Cell In Sheet And Find In Another Sheet

Mar 27, 2014

I am trying to look up a numerical value in Sheet 1 Cell:F7 and find that value in Sheet 2 Column B, then offset 29 columns in the row where the value was found. The number will not have any duplicates within Sheet 2.

View 8 Replies View Related

Find And Find Again - Object Variable Or With Block Variable Not Set

Jun 5, 2007

After doing a search, I need to ask an Excel 2003 question. I'm creating a tool to open three sparate workbooks. One is the driver and I need to use it to pull data from the second and then to place that data along with additional data into the third.

My driver data may consist of a single value or multiple values separated by semi-colons in a cell. A single value works fine. The first value in a multi-value condition works fine. the second find, however, gives me an object error. I'm using the " split" verb to separate the values. Here's my code. Have you any idea why the second find is throwing up this error when the first find works correctly?

varData = Split(strRef, ";", -1)
For J = 0 To UBound(varData)

varSrchVlu = Trim(varData(J))
' do the ARIS Exrtact matching
Workbooks(strManualFile).Activate
Workbooks(strARISExtract).Activate ' Activate ARIS Extract
Sheets("Processes").Cells(2, 1).Activate
Workbooks(strARISExtract).Sheets("Processes").Range("A2").Select
Workbooks(strARISExtract).Sheets("Processes").Columns("A:A").Select

View 3 Replies View Related

Find Replace :: Find All Occurences Of And Or AND And Replace With And

Oct 26, 2009

Range B3:B1000 is text strings. Column C2:C50 is a list of words that I would like to "Find" in Column B and replace with it's lowercase values unless they start off the string.

Example

Find all occurences of And or AND and replace with and
Find all occurences of With or WITH and replace with with.
Find all occurences of Or or OR and replace with or

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved