I'm hoping to achieve the result in the image below.
Column A contains data, column B contains values to be added to column A and column C contains values to be removed from column A. Using formulas or macros, how can I present the result in column D?
My problem in the given excel file
1. Sheet1; how to Add "B000" in the List A or "B00" if the digits and 5 in the list
2. Sheet2; how to remove "B000" or "B00" from the list
3. Sheet3; how to highlight difference or find out the difference between to lists
Update_List.xlsx
I have data that resembles (I have also attached an example workbook as well if that is easier)
Column A.................Column B................Column C..................Column D.............Column E................Column F
Year.......................Quarter...................Month..................Product-Code...........[data A]................[data B]
2013.........................Q1.........................Jan........................SD-21...................13%......................0.05%
2013.........................Q2..........................Apr........................NV-12...................7%.......................6%
etc
I am hoping to have, on another sheet, a series of dependent drop boxes- Year, Quarter, Month, SKU- which after selecting then displays 'dataA' & 'dataB'.
So you could select- List 1: 2013 ----> List 2: Q1 ----> List 3: Jan ----> SD-21.................and then 13% and 0.05% are displayed.
The data will be continuously added to and so needs to be based on a dynamic data range.
I know that a pivot table is the perfect way to do this, however my bosses have requested that I do not use that format so it is easy for all staff to access.
So I think I need to construct some sort of dashboard sheet, I have experimented with OFFSET from other posts, but so far have had no joy.
I am trying to create an easy fill spreadsheet for a game. I am looking to have data values auto fill based off of the entry of 2 prior drop down menus.
I would like to have values for "Move", "Str", "Spd", "Skill", "Armor", and "Value" auto populate after the "Race" and "Role" has been selected. Data for these auto fills I have put on Sheet2 while the main file itself is on Sheet1.
If possible I would like to have Value increase by 5 for every level in "Rank" on the sheet.
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
I tried using several of the formulas and VBA codes from other posts, but they just didn't work out quite right. And since I'm worthless at VBA coding, my changes either did nothing, ruined the code entirely, or blew up my computer : D . The attached doc should explain everything.
View 9 Replies View RelatedIn the enclosed SS there are several columns, "A" being Style and "G" being Available. I'm trying to piece together some code that will remove all of a style(all sizes) if the number of stock is less than say 3; however, if any one style has 3 or more available the entire style needs to remain in the spreadsheet.
I've been trying to piece together some code but I don't think I've quite come up with what I'm looking for.
editing a datafile. I have a spreadsheet (Sheet2) that looks like this (Start Date is entered in J2 in Sheet 1 and End Date in J3 in Sheet1):
Date & TimePatient IDResultLevel
13/02/2014 14:1818.5>=4 AND <=15
13/02/2014 14:1027.8>=4 AND <=15
13/02/2014 02:231122.5>20
13/02/2014 06:191116>15 AND <=20
13/02/2014 10:081110.2>=4 AND <=15
13/02/2014 14:111113.4>=4 AND <=15
13/02/2014 17:541112.9>=4 AND <=15
[code]....
I need to find the maximum and minimum value for each subject. If the min>4 and max<10 and the subject does not have a value on either the last date (J3 in Sheet 1) or the date before that (J2 in Sheet 1 - 1), I need all of their data removed from the spreadsheet.
In worksheet 1 I have a list of employee numbers (column A) and and names (Column B)and in worksheet 2 I have a list of employee numbers (column A) and their payroll contracts (Column B). 1 employee can have multiple contracts).
What I'm trying to achieve in workshet 1 is to have a dropdown list ( Column C) which returns just the contracts that relate to the employee number in column A.
The goal here is for users of this form to enter the "type" of tool and automatically create a list of tools based on the "type" in another sheet (NEW SHEET). See the heading on that sheet in the file for more info.
Also, keep in mind that this would be a template (.xlt) for 2003 and all the sheets would be individually locked -- password protected.
Since this form will be filled in by folks that aren't very computer savvy in general, I'm trying to make this as simple/automatic as possible. I myself have a limited toolbox as well. I'm not entirely sure a program would be needed (IF statements in the cells?)
I run a report of varying length that generates times. I need to take the final time from 'Column J' and make that the final value for 'Column U'. 'Column J' has a varying number of entries and the times are not equally spaced out. In 'Column U' I want to go from the start time (which I have referenced from J:2) to the final value in 'Column J' and include every minute in between. Then I need to take the new list of every minute from 'Column U' and make it the x-axis of a bar chart.
View 2 Replies View RelatedI am trying to create an array formula that would list all the corresponding rows that contain a certain value.
Here is an example workbook to illustrate what I'm trying to accomplish:
Book1.xlsx
I need to create a list/table that would show all the row labels that correspond to a value. For example, I need to make a list of all cells with a value of 1 under the "Green" column and list the row label(s) that correspond to 1.
Creating the list would result in following return values for "Green": A,C,E,F in separate rows.
I've been using [URL] ..... as a guide but the formulas did not return a corresponding row label. Pivot tables did not accomplish this either.
Is it possible to do without using an array formula?
I have Columns A:D with a heading at the top. the user can then type organisation names under the correct column. There is a maximum of 30 entries (rows 2:32).
Problem One:
Column E is a hidden column and I need cells E2 and downwards to be a list which gets populated by ALL the organisation names inserted into $A$2:$D$32. I don't want there to be any blank cells until the last entry in column E (if that makes sense). how to populate this list?
Problem Two:
At another part of the worksheet, I have five cell where the user has to select from a list. The five cells correspond to the lists in columns A:E. Is there any way to avoid having blank options in a list using data validation (say if the user has not entered 30 organisations into one of the columns)?
I have a long list of names in column A, and in Column B next to each name is one of 10 group identifiers (Advertising, Marketing, Finance, etc). I'd like to divide the 300 names into groups of four people, with none of the four people having the same group identifiers. So, groups of four people that look like:
Column A Column B
Amanda Jones Marketing
Shelly Stevens Finance
John Banana Advertising
Tim Stewart Logistics
What is the best way to do this?
I've 2 lists that contain similar info but 1 of the lists holds info I need to join.
I've a unique case sensitive id that I'd like to use to join the lists.
I usually use VLOOKUP but it is case insensitive and I cannot understand how to make it case sensitive.
The 2 lists are in 2 separate worksheets as they each hold a lot of data.
Example.....
In the drop-down menu in col D I select the value “Egress”, then the drop-down list in col E is populated with the values of EgressCol. Now I select a value, lets say “Cash payment”. If at a later time I change the value of col D, lets say to “Ingress”, then “Cash payment” in col E doesn’t match the values available for IngressCol (the correspondent dynamic list for the Ingress value).
I need a conditional formatting formula that checks whether the value in col E is listed in the corresponding list of the value selected in col D. Request: I found this formula that works fine, but it gets Excel to work really slow.
=COUNTIF(INDIRECT(SUBSTITUTE($D2," ","")&"Col"),$E2)=0
Just wondering if a drop down list can be specific to a selection made in a previous cell. For example in column A the user would select either:
Weekly
Monthly
Other
Then in column B, the drop down list would be conditional upon what was selected in A. So if the user selected 'Weekly' - the drop down list in B would be: Monday, Tuesday, Wednesday, etc. Or if the user selected 'Monthly' in column A's list, the list in column B would be: 1, 2, 3, ......31.
I have a dynamic dropdown list in B3. The dynamic dropdown list in B4 is a result of my choice in B3, and my dynamic dropdown list B5 is a result of my choice in B4.
When changing a value in B3 the dropdown lists B4 and B5 will be reset. This is done by this VBA Script in my worksheet.
Trying to create a dynamic costing spreadsheet, where the user has to make multiple selections from many dropdown lists, all of which end up showing a total cost.
So far I have managed to create relatively dynamic lists, so that the choice in one cell will dictate what options are available in the next.
But if a user selects an options form all the dropdowns, and then decides to go back and modify a previous option to something else, the effected dropdown lists do not change until you click on the drop down arrow again and see the options available have changed.
Let me try and simplify...
'Menu 1' has two option: 'A' and 'B'.
If 'A' is chosen, then the next menu, 'Menu 2', will have options '1' and '2'.
If 'B' is chosen from 'Menu 1', then the options in 'Menu 2' will be '3' and '4'.
Lets say the user chose 'A' from 'Menu 1' and then '1' from 'Menu 2'... AND THEN went back and changed their choice in 'Menu 1' to 'B'....
'Menu 2' will still be displaying '1', even though the options are only '3' and '4'.
Can I make the dependant menu's either reset or blank or highlight to show that a change made somewhere else has made them currently invalid
I'm trying to continue on this post: Populate Cells After Choice From Drop-Down
I'm trying to expand on CNL's idea. What I need to do is create a spreadsheet that autopopulates two blocks based on the dropdown box that preceedes it. I've got it to partially work, but can't figure out the next step. The differnce between my sheet and CNL's sheet is my drop-down is an indirect data validation.
The easiest would be to have my data in one long list, but my goal is to make it easier on the user to find the specific procedure (I'm trying to build a budgeting spreadsheet for a medical office). So in box A15 there is a list of the different service area, which gives a list of choices in C15 based on the choice selected in A15. My goal is to have G15 and G16 list the cost and charge respectively.
M1 - O3 is the data for Radiology
Q1 - S4 is the data for Labs
U1 - W4 is the data for Office
I want to populate the value of a specific cell based on the choices made from two other dependent validation lists.
I am attaching a workbook that explains what I need to do.
I want to compare 2 lists in separate sheets based on multiple criteria and delete the duplicates
Sheet 1 - new list in column A:E
Sheet 2 - old list in columns B:F
So here is what I need: the macro should generate single IDs made of Sheet 1 Ai,Bi,Ci,Di,Ei cells for each row i to the end of the list + generate single IDs made of Sheet 2 Bi,Ci,Di,Fi
If . Evaluate (Sumproduct (IDs made of Ai,Bi,Ci,Di,Ei from sheet1) & Sumproduct IDs made of Bi,Ci,Di,Ei,Fi from sheet2) >1 then delete the entire row in Sheet 2.
This will leave me with only updated items (rows) in Sheet 2
I'm looking for a solution to a problem and from what I've read in the forums so far, this is the place to come. I first want to say that I have tried to solve the problem by using guidance from other similar threads and adapt those answers to my needs, but as my understanding of VBA is non-existent this was somewhat difficult. I don't want to post a repeat question and I hate wasting people's time if unnecessary, but I can't do this on my own.
That being said, here is the problem;
(I have attached a simplified copy of the worksheet I am working on for reference)
I would like to lock a particular cell in my spreadsheet based upon the selections made from two drop down validation lists (Cells “C4” & “D4”)
Essentially, if a correct choice is made in both, then the cell “E4” becomes unlocked for editing. If however, the correct selection is made in one list, but not the other, I need the cell “E4” to remain locked and a message to appear to prompt the user to correct their mistake.
Furthermore, both the validation lists have a whole range of selections that are very similar but have subtle differences;
E.g.
"Soft Eye by Talurit"
"Soft Eye by Splice"
Is it possible to write a VBA code that performs a similar function to the =IF(ISNUMBER(SEARCH("**",))) formula, so that if any choice that contains the word "Soft" is selected from either or both lists then the cell “E4” becomes unlocked, but if the selection does not contain that word then the cell remains locked?
If anyone could provide a code to make this happen, I would be very grateful! But please explain how to do this, as the word “Soft” won’t be the only parameter and I may need to alter the code so I need to understand the principle behind it; For example, on the spreadsheet, if in the ‘Inboard End’ list a ‘Soft Eye’ is selected and on the ‘Outboard End List’ a ‘Soft Eye’ is selected then cell E4 is unlocked for editing. If in the ‘Inboard End’ list a ‘Soft Eye’ is selected and on the ‘Outboard End List’ a ‘Fused and Tapered’ is selected then cell E4 is unlocked for editing, but if in the ‘Inboard End’ list a ‘Soft Eye’ is selected and on the ‘Outboard End List’ a ‘Standard Eye’ is selected then cell E4 remains locked and an error message appears to alert the user that his/her choices are incorrect. If however, "Soft" is not selected in either list then cell E4 remains locked (it has to be selected in at least one of the two lists to allow editing).
This is a work in progress (not all the formulas that will eventually be used have been entered yet, so please excuse the untidiness of it all) and the choices are likely to change based on input from my colleagues, so I need to understand how the VBA works in order to alter it accordingly, but I don’t want to put any more work into this (it’s still in the early stages) if it isn’t possible to achieve these needs.
how best to do this (bare with me I'm not quite a pro at excel yet!). I'll attach my doc (JMP Excel Forum) so you know what I'm taking about. I've set up the data to work in a similar way to this, as you can see I've a table set up (Appliance Sheet) which feeds information to the Main Sheet which contains the drop down lists.
What I need it to do is autofill the wattage column (Main!F8 onwards) with the wattage for the device as described in Appliance!N3 or N4 for example. For the wattage column to equal 28 (equivalent to Appliance!N3) then the following would show in the dropdown selections Type>Computers SubCategory>Monitors Device>BENQ G2222HDL Status>On
Is there a way to do this with the set up I have?
I did have a previous version of the whole worksheet that each Device had its own table and I looked up the wattage using and If formula to lookup a info on the device and knowing where to look it up based on the subcategory
=IF(ISERROR(VLOOKUP(D7,IF('Main UI'!C7="Heating_Cooling",Appliances!$A$7:$B$14, IF('Main UI'!C7="Kitchen_Bathroom",Appliances!$A$16:$B$27,IF('Main UI'!C7="Monitors",Appliances!$A$52:$B$62,IF(C7="Computers",Appliances!$A$64:$B$68,........
And I got it to work but it was getting to cumbersome to add in new devices and update the formulas. If attached that doc (OLD) so you know what I'm talking about. The last two sheets are the same sheets that make up the new document (JMP Excel Forum)OLD.xlsm
I really prefer the new way I've got it set up. Its easier to add new information or options to the dropdown list
What I am looking to do is this... (using Excel 2007)
I need to have more dependent lists based on the selection in Column A. (My column B is already set up and works perfectly using INDIRECT)
For example:
Column F would be a dependent list of colors based on the sales rep chosen in Column A
Column I would be a dependent list of managers based on the sales rep chosen in Column A
Column M would be a dependent list of part numbers based on the rep chosen in column A
without using VBA? (If I HAD to - okay, the other person maintaining the sheet would be lost....) I haven't been able to find anything close to what I want to do online - maybe I am just not using the correct terms.
I am trying to create a worksheet which can calculate the Outstanding Work Estimation based on available information.
The information available with me is presented in Rows 3, 4, 5, and 6. For these types of work orders, I have information regarding their Previous Outstanding Status, New Orders, Completed Orders, and at presented Unworked Orders (or Outstanding orders at the end of Jan 2008).
Second set of information is available in rows 9 to 23. This information provides for which type of orders were completed by Staff 1 and Staff 2.
Based on these two sets of information, I am trying to get to the point where I can calculate the following:
a) Applying the weight of orders (namely 1A, 1B, 1C and Blend) by using the drop down list function in column B, I should be able to get the results in Column C (C25 onwards till C40), Column D (D25 onwards till D40), and Column E (E25 onwards till E40). Simlarly for all other months...for February, March, and so on...till December 08.
Is there a way to make a drop-down list optional? When I create drop-down lists the user has to make a choice from that list.
Example: a list of doctors. I need the user to be able to select from that list if the patient saw one of those physicians, but if the patient saw another doctor not on the list, I need the user to be able to enter the name of that other doctor. Currently the user has to select from the list or not enter a doctor. I am using Excel 2003.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I would like to have a list that when one of the items is chosen, it brings up a second list and so on.
Therefore, list 4 will depend on what was chosen from List 3 which will depend on List 2 which will depend on List 1.
I'm not sure if macro's are required.
I have attached a file that lists out a Decision Tree (Decision Tree Tab).
I also have a Form tab which is where I have the decisions that need to be made.
So, in the Gender Row I can choose Male or Female. If I choose Male, then the Interests list should contain Cars, Sports or Colors.
Type will depend on which I chose and finally, Detail will depend on which Type I chose.
1) Imagine i have a row 1 with names, column 1 with bank account numbers, and under each name corresponding to each bank account it says "yes" or "no" depending on whether or not they are authorized on the bank account. How do i make 2 drop down lists, 1 with bank account numbers that produces the names which are authorized on the account and visa versa (list with names showing bank a/c numbers). It needs to be able to be updated easily.
2) Suppose I have the table as described above and another excel file with 1 column as bank a/c's and another column is authorized bank users. In this column however each cell just has a bunch of names for example one cell may contain (james, john, jack, jennifer, bill). Is there anyway to check these names against the ones in the table from the other spread sheet?