Add Total $ Value Formula Into Existing SUMIFS Formula?
Apr 3, 2014
In my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx
View 2 Replies
ADVERTISEMENT
Mar 27, 2014
I have an existing formula in a cell linking back to a start date only. determining how to add an additional formula to exclude weekends, and possibly holidays.
View 2 Replies
View Related
Aug 12, 2007
This task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
View 9 Replies
View Related
Dec 19, 2008
I currently use the following formula: =workday(H21,H23,J20:J34) which calculates my date based the date entered in cell H21. While testing I realized that I needed to add another variable to the formula for a specific scenario. When my Date in H21 is less than todays date I require another workday formula to be calculated. How can I add this if statement to the existing formula?
View 2 Replies
View Related
Dec 22, 2012
I'm trying to add either a new condition to a formula or modify existing formula, so blank cells can't be taken as a number like 0 Here is the formula =IF(N14>0,1,0)
***This is what I do with formulas with similar problems =IF(COUNT(Y14,A14)=2,Y14/A14*100,"")
unfortunately the above condition its already a condition by itself so I don't know what to do whether to modify condition or add a new condition which I don't know how to do.
View 9 Replies
View Related
Jan 7, 2010
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
View 2 Replies
View Related
Sep 21, 2009
=AVERAGEIFS($D$106:$D$2825,$D$106:$D$2825,">"&$I117,$D$106:$D$2825,"<"&$J117)
Returns = 0
But on a copy of the same worksheet, the same formula returns the correct value. Is there something wrong with my formula cotext?
View 6 Replies
View Related
Jul 18, 2014
I have a number of cells, with a rule as follows, but within each cell the company name and month vary, over 836 cells, so I cannot do a find and replace so wanted to know if there was a way of adding the following part to the rest of the formula within the 836 cells in one go, rather than tediously going through each cell and copying/pasting.
The part I would like to add to the various cells - 'Master Quote Sheet'!$H$18:$H$6021, "Won"
Existing formula (the varying parts within the different cells are the "02.2014" and "Company Name"
=SUMIFS('Master Quote Sheet'!$J$18:$J$6021, 'Master Quote Sheet'!$E$18:$E$6021, "Direct", 'Master Quote Sheet'!$A$18:$A$6021, ".02.2014", 'Master Quote Sheet'!$D$18:$D$6021, "Company Name")
View 14 Replies
View Related
Dec 13, 2013
number for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies
View Related
Jun 1, 2014
I have a SUMIFS formula that I am having trouble with. I am trying to check the following:
=SUMIFS(NFCU!$G$5:$G$298,NFCU!$E$5:$E$298,NFCU!$H$2,NFCU!$A$5:$A$298,"<e1")
The range NFCU!$A$5:$A$300 is a column of dates. The evaluation of "<e1" does not seem to evaluate. However, when I change "<e1" to a date value of 41760 it works. How can I reference a field rather than the raw value?
View 4 Replies
View Related
Oct 9, 2009
How would I convert the following formula into Excel 2003?
=SUMIFS($Q$7:$Q$5000,$O$7:$O$5000,"Cat",$P$7:$P$5000,"Dog")
View 2 Replies
View Related
Oct 31, 2013
On the attached work book I have 2 sheets on the total minutes sheets I need to run either a VBA or sumif formula that looks at all the Init columns and if it finds that name then it sums the duration cells corresponding with that name.
Picking log-Rev6.xlsm
View 4 Replies
View Related
Jan 16, 2009
have this formula..
=SUMIFS(Sheet2!$D$2847:$D$3065;Sheet2!$I$2847:$I$3065;$B$6;Sheet2!$G$2847:$G$3065;$C$6;Sheet2!$B$2847:$B$3065;A14)
D2847 - D3065
includes Numbers..
lets say.. i want every cell counted which has in these range the first two numbers..
every cell has..
5052
5053
5054
4060
4050
so i count the entries which has 50.. so in total it gives a result of 3. Not summing them, just count the entries that has the first two numbers "50" in every row..
The Red Markings can be replaced, the rest should stay.. it is needed due different criteria.....
View 6 Replies
View Related
Dec 30, 2009
Need convert the following formula so that it would work in Excel 2003: =SUMIFS($BB$4:$BB$500,$E$4:$E$500,"Abbeywood First",$L$4:$L$500,"Autumn"). I could play around with it for hours and get nowhere, so I'll just turn to the experts.
View 5 Replies
View Related
Sep 12, 2012
I have some sumifs() functions in cells in a workbook that contain external links in them:
Code:
=SUMIFS('C: empForAuditor[Budget Employees 2013 (0055521).xlsm]Labor Summary'!$E$54:$E$88,'C: empForAuditor[Budget Employees 2013 (0055521).xlsm]Labor Summary'!$C$54:$C$88,$G50,'C: empForAuditor[Budget Employees 2013 (0055521).xlsm]Labor Summary'!$A$54:$A$88,H$49)
The formulas work fine if the external file is open. However if the linked file is not loaded and I load the file with the external links, as soon as the file with links is calculated, some of externally linked cells turn to "#VALUE" errors. I have a need to have only certain people see the employee file that is referenced above but the others need to update the file with the external links and not have errors in cells.
The really weird thing is that some cells yield the #VALUE error and some don't, even when both have SUMIFS() functions in them. Even cells with the Exact same formula in them will sometimes yield #VALUE and other times yield a real value.
View 3 Replies
View Related
Mar 29, 2014
Want to apply sumifs formula with multiple rows and columns.
SOURCE DATA
Jan-13
Feb-13
Mar-13
Apr-13
Apr-13
Apr-13
[Code].....
View 4 Replies
View Related
Jul 27, 2012
I have the below formula working correctly. However the issue is when it pastes and fills down values its using H1 reference in the formula even when it goes to the next column. So basically when it goes to cell I2 it should update the sumifs formula to lookup I1 instead of H1 and so on and so forth for all columns till the loop stops.
VB:
Sheet1.Activate
Dim frmla As String
frmla = "=SUMIFS($C:$C,$A:$A,H$1,$B:$B,$G2)"
Range("H2").Activate
Do Until ActiveCell.Offset(-1, 0) = ""
ActiveCell = frmla
ActiveCell.Offset(0, -1).End(xlDown).Offset(0, 1).Activate
Range(ActiveCell, ActiveCell.End(xlUp)).Select
Selection.FillDown
ActiveCell.Offset(0, 1).Activate
View 1 Replies
View Related
Apr 28, 2014
SUMIF and SUMIFS formula, where in I want to set criteria in the formula as greater than or less than or equal to value derived from another formula. I am inserting the following formula but excel is not allowing me to enter the formula.
=SUMIFS($C$22:$C$30,$E$22:$E$30,>=LEFT(L21,3),$E$22:$E$30,<=RIGHT(L21,3),$A$22:$A$30,G22)
View 3 Replies
View Related
Dec 4, 2013
Okay so I'm trying to us the SUMIFS formula to add values on a different sheet based on criteria on that sheet but I want to use a text string on the sheet with the SUMIFS formula to reference the sheet with the data on it.
My original formula was:
=SUMIFS(INDIRECT("'"&A2&"'!K4:K500"),INDIRECT("'"&$A$2&"'!B4:B500"),"=LEFT(AA1,2)",LEFT(INDIRECT("'"&$A$2&"'!C4:C500"),3),"=MID(AA1,7,3)")
However I kept getting an error and excel said that INDIRECT("'"&A2&"'!K4:K500") was volatile, so I tried to replace it with INDEX and my formula was:
=SUMIFS(INDEX(A2:A2,1)&"'!K4:K500",INDEX(A2:A2,1)&"'!B4:B500",LEFT(AA1,2),LEFT(INDEX(A2:A2,1)&"'!C5:C500",3),MID(AA1,7,3))
However INDEX(A2:A2,1)&"'!K4:K500" returns the value "1251062 EP.EL+CB-A10'!K4:K500" which wont calculate properly because of the quotation marks but excel is auto inserting them.
View 3 Replies
View Related
Dec 11, 2013
I'm exporting data from an access database into an Excel document and want to use the Sumifs formula to add up weights between a defined period (we have to show tonnages on a weekly basis).
The data and calculations are on a separate worksheets. The data looks like this:
[URL]
I'm trying to sum the data in column E based on the date range in column A and my formula is
=SUMIFS('Site CR'!E$5:E$5000,'Site CR'!A$5:A$5000,">01/11/2013",'Site CR'!A$5:A$5000,A5)
For some reason, my formula always returns 0 and I can't see why.
[URL]
View 4 Replies
View Related
May 1, 2012
I have a large metrics spreadsheet that has thousands of formulas using SUMPRODUCT. We are using Excel 2007/2010 now and I wondered if there was a way to convert these type of formulas to use the SUMIFS or COUNTIFS. I can do simple ones with 1 or 2 criteria where its AND, but then there is a combined OR and AND like this one has I cannot get them to work right, am I stuck with using SUMPRODUCT? My hope was to speed up the overall calculation speed. Note: The data spreadsheet 'Sheet2' contains 64555 rows, I write these formulas using VBA so that the range is finite to the actual data range is why you see 64555.
=SUMPRODUCT(--('Sheet2'!$J$3:$J$64555=$A6),--(('Sheet2'!$I$3:$I$64555="HOC")+('Sheet2'!$I$3:$I$64555="MGN")))
View 2 Replies
View Related
Jun 10, 2013
I have a workbook with multiple tabs that I update every other month with current data. I have one tab for data that I clear each time and copy the updated info into. (That info is copied from another excel spreadsheet, by the way.) On the second tab I have sumifs formulas set up to pull in certain data from the data tab. This setup has worked perfectly until today. I copied my data into the one tab but could not get the formulas to calculate. It looks like the formulas aren't picking up the data. I've checked to make sure the formulas are calculating automatically. I've retyped the formula. I've replaced the =. I tried naming the ranges I wanted the data to be picked up from. I've tried changing the format of the data - general, text, numbers, etc. I'm working in excel 2010
View 2 Replies
View Related
Jul 5, 2013
How do I use the SUMIFS formula for ranges greater/less than some number?
In my spreadsheet I need to sum the values that are less or equal to January 1st, for example. How do I do it? Because this formula allow to find values equals to something.
View 5 Replies
View Related
Sep 17, 2013
I am trying to work out a formula to return a sum based on 2 variable, but one of the variables in in a column and one in a row, anyway I can do this?
I don't want a normal sumif returning the relevant column as the relevant column will change based on a cell that can change.
I basically have a list of products sold (products listed down the page) by month (month listed across the page), I want to sum all the products in a particular month on a separate tab (both product and month can be changed).
View 8 Replies
View Related
Nov 10, 2013
I'm working on a formula for calculating shipment weight per city it goes to per weight scale of the shipment pricelist. Although we have 4 customers with customer codes which we ship with our own trucks and some customers pick up there goods.
Therefore, my sumifs formula currently looks like this:
=SUM(SUMIFS('Freight SH 13'!$R$7:$R$14176,'Freight SH 13'!$R$7:$R$14176,"
View 1 Replies
View Related
Jan 7, 2014
I am trying to do a sum of data that contains three requirements - The country has to match either the USA or Canada and then it needs to pull for only a certain month (i.e. Jan, Feb, Mar) and then for that month only pull either Airfare, Hotel, Per Diem, or Car Rental. Basically looking for a way to Sum only the specific category for a specific time frame.
View 9 Replies
View Related
Feb 11, 2014
I have a report for which I would like to set up a Quarterly summary section. There are 6 working teams listed in my table and I have created two cells with data validation to allow me to specify which team and for which quarter I would like to pull data. My intent is to have a formula in one cell which can extrapolate the quarterly team information based on the values in the data-validated cells.
My worksheet is set up so that:
The data table (tblD) contains metrics for all teams for the full yearTeam names appear in Column A of the table and the reporting month appears in Column BCell M10 has data validation so that the only choices are: Q1, Q2, Q3, or Q4Cells X1:X4 contain the quarterly values mentioned aboveCells Y1:Y4 contain array references, so that Cell X1 = Q1 and Cell Y1 = {"January", "February", "March"}Cell N10 contains a VLOOKUP which returns the appropriate array from Column Y based on value in Cell M10Cell L11 has data validation so that the only choices are the 6 team names
Now I was able to get quarterly information by manually typing the 3-month array into my formula like so:
Code:
=SUM(SUMIFS(tblD[TU5],tblD[Team],$L$11,tblD[Month],{"January","February","March"}))
BUT! When I try to use a formula which points to the VLOOKUP cell (N10)--thus allowing me to make the display dynamic--the result is always 0.
Code:
=SUM(SUMIFS(tblD[TU5],tblD[Team],$L$11,tblD[Month],$N$10))
While inspecting the formula in the formula bar, I noticed that the values listed in the array appeared with double quotes (i.e. "{""January"",""February"",""March""}"). I tried every permutation of typing the array in the lookup cells I could think of, but none would allow my formula to properly calculate the total I needed.
{"January", "February", "March"}
{January, February, March}
January, February, March
Although I don't often utilize arrays in my formulas, I do employ them from time to time. I'm hoping there's some factor I might have overlooked which keeps my formula from working. is there an issue preventing array references stored in cells from being used in formula?
View 6 Replies
View Related
Dec 2, 2013
I am trying to solve the problem I am having for my weekly report. Currently our Reporting has to be done Via Excel, with no reporting consule to have dynamic ability. I am trying to put a formula table together so all my manager has to do is dump raw data and the calculations take care of the totals for the table. I am running into the issue of when trying to return certain data at a certain date. So here is what I have and what I need (If it can be done without changing the formula each week)
For the MTD calculation I have:
=SUMIFS('Raw2'!$L$2:$L$902317,'Raw2'!$O$2:$O$902317,"=2013",'Raw2'!$M$2:$M$902317,"=11",'Raw2'!$N$2:$N$902317,">
=1",'Raw2'!$N$2:$N$902317,"<=31",'Raw2'!$B$2:$B$902317,"=0000013")
The raw data wont have information past the current day of the month so the <=31 allows for the current month to calculate correctly.
Where I am having trouble is the Previous Month Formula:
=SUMIFS('Raw2'!$L$2:$L$902317,'Raw2'!$O$2:$O$902317,"=2013",'Raw2'!$M$2:$M$902317,"=10",'Raw2'!$N$2:$N$902317,">
=1",'Raw2'!$N$2:$N$902317,"<=24",'Raw2'!$B$2:$B$902317,"=0000013")
This returns the data, but I have to change the "<=24" every week to the date that I want up to.
I have tried =eomonth(today(),-2+1) but that is not allowed as the Criteria.
View 5 Replies
View Related
Aug 10, 2009
i am trying to us the SUMIFS formula to work out if a rep is below target on selling brands.
I have two worksheets summary and data, Summary worksheet is where i am trying to do the sumif formula against a sales average taking the information from the data worksheet
I have account manager name, brand, sales, DSI
I tryed the below sumifs formula but its coming back as 0
Please could someone have a look and point out the error in my ways
=COUNTIFS(data!$A$2:$A$11,B17,data!F2:F11,"<B2)")
The first count if should count how many times the account manager appears in the brand and the second count is if his DSI on the data worksheet is higher that the target dsi on the summary sheet
View 3 Replies
View Related
Jul 31, 2012
I'm trying to sum over a range (column A) based on values in another range (column B). Column B's cell values are calculated with a simple numeric formula that is either a subtraction or an addition of two cell references. I want to sum all the column A cells for which the corresponding column B cells are determined by a subtraction. Then separately, sum the cells for which the corresponding column B cells hold an addition. It seems that SUMIFS is the function to use, but how do I specify the sum criteria as "a subtraction" or "an addition"?
Windows 7, Excel 2007
View 5 Replies
View Related
