On the attached work book I have 2 sheets on the total minutes sheets I need to run either a VBA or sumif formula that looks at all the Init columns and if it finds that name then it sums the duration cells corresponding with that name.
Picking log-Rev6.xlsm
SUMIFS formula where it calculates multiple columns as SUM RANGE
Currently I've got this formula:
=SUMIFS(INDEX(Link!$C:$N;0;Mth);Link!$A:$A;LOGIC!B$82;Link!$B:$B;LOGIC!D$81)
The above mentioned formula works great, if I use it for one specific month, but not if I want to have my figures Year to date.
If I want to calculate the sum of multiple columns, and the sum is defined by the month I choose. How should the formula be?
For example: If I choose month 5, I want to calculate column C up till and including G (so only the first 5 columns), and if I choose month 8 it should calculate the sum of column C up till and including J.
I set my range as follows :
[Code]....
This gives me two ranges with multiple columns of data, which should work fine.
Then try to gather my data as follows :
[Code] ........
But this DOESN'T work - it seems like SumIfs doesn't work with a range with multiple columns... ?
The code DOES work if the rng2013/rng2014 ranges have only one column of data instead of more...
Is it possible to use Sumifs to calculate multiple columns i.e. if a summary were able to sum Part No. 742810 O-rings for March it would arrive at 24 O-rings and 20 of the same for April. I tried it using
=SUMIFS(Issues!$F$2:$F$6,Issues!$B$2:$B$6,B8)
(Example) but it seems that Sumifs may have restrictions on the number of columns.
******** language="JavaScript" ************************************************************************>
Microsoft Excel - Parts Distribution.xlsm___Running: 14.0 :
OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutL2L3L4L5=ABCDEFGHIJKL1Parts Description Part No.EquipmentMar1Mar5Mar12Mar30Apr6Apr17Apr27May3
[Code] .........
I am trying to improve how I write my formula. In this case I have replaced this horribly long formula:
=SUMIFS(Amount,CAAPartner,$A10,TransactionAccountFunction,"CRT",TransactionSource,
"MC",ClassCode,"PR",TransactionCategory,1,TransactionCode,3006,ChargeOff,"OK")
+SUMIFS(Amount,CAAPartner,$A10,TransactionAccountFunction,"CRT",TransactionSource,
"MC",ClassCode,"PR",TransactionCategory,1,TransactionCode,3031,ChargeOff,"OK")
[Code] ....
with this nice shortened version:
{=SUM(SUMIFS(Amount,TransactionAccountFunction,{"CRT","SCR"},TransactionSource,{"MC"},
TransactionCode,{3006;3035;3031},ChargeOffCredits,{"OK"},CAAPartner,A10,ChargeOffCredits,"OK"))}
I have pieced this together using information on various forums and it appears to work, but I have a question:
What is the difference between using a comma and semi-colon in this new formula?
Want to apply sumifs formula with multiple rows and columns.
SOURCE DATA
Jan-13
Feb-13
Mar-13
Apr-13
Apr-13
Apr-13
[Code].....
I'm working on a formula for calculating shipment weight per city it goes to per weight scale of the shipment pricelist. Although we have 4 customers with customer codes which we ship with our own trucks and some customers pick up there goods.
Therefore, my sumifs formula currently looks like this:
=SUM(SUMIFS('Freight SH 13'!$R$7:$R$14176,'Freight SH 13'!$R$7:$R$14176,"
I am trying to do a sum of data that contains three requirements - The country has to match either the USA or Canada and then it needs to pull for only a certain month (i.e. Jan, Feb, Mar) and then for that month only pull either Airfare, Hotel, Per Diem, or Car Rental. Basically looking for a way to Sum only the specific category for a specific time frame.
View 9 Replies View RelatedMR EXCEL EXAMPLE.xlsx
I'm trying to create a sumif or sumifs function that will add numbers from two columns. I've attached an example (semi populated as needed to get rid of some personal data so ignore the ref notes). On the Category Worksheet I'm trying to get column D to sum info from the March Worksheet. I would like the function in the Category Sheet to add Columns F and Columns H from the March Worksheet if they correspond to column A22 on the Category Worksheet i.e, the result of the data I've left on this example sheet should be $20....... sum of F = -130 + sum of H = 110
I am trying to do a SUMIFS from a chart with duplicate values in rows and columns.
Data looks like this:
So this is basically sales of different products (columns) on different routes (Rows).
I want to add up a total for all the same kind of products eg. Magnum for each route eg. Local Top End.
Here is a sample of the formula I am currently using.
Formula:
[Code]....
This works perfectly for what I was needing but I am adding more criteria and running into a problem. I am rolling together usage for parts with different part numbers but the same function in order to reduce SKUs (as well as capture replaced SKUs) needed. These are located in Columns A:G. what i would like to add is more conditions to where the parts are going. Currently I have one location located in cell B2. To analize my usage further, I want to add another location in C2. So i want my formula to look like this.
Formula:
[Code] .....
when I use this it still only adds up with what matches in B2 regardless of the value in C2. Conversely, I can get the formula to work if I take out the extra part numbers.
Formula:
[Code] ....
Using the SUMIFS function, I could successfully get the expected results from extracting data from 15 base separate excel files (from where the data will be extracted). However, whenever I am re-opening my master sheet(where I want the data to reflect) it gives me #VALUE!
Only after opening all my 15 base sheets, my master sheet fetches data.
I created the following formula and cannot get it the correct result. The return result is only adding column "P' with "275". How can I get it to recognize "276,"278"?
=SUM(SUMIFS('Supplies Only'!N:N,'Supplies Only'!E:E,{"2","26","27","59","86"},'Supplies Only'!P:P,{"275","276","278"}))
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
I have a below table as below
A B C
a aa 1
a aa 1
a dd 1
a aa 1
b aa 1
b bb 1
b aa 1
b bb 1
c cc 1
c bb 1
c bb 1
c cc 1
d cc 1
d aa 1
d bb 1
d cc 1
When i put the formula
=SUMPRODUCT(SUMIFS(C1:C16,A1:A16,{"a","b","c"}))
it returns 12 However when i put
=SUMPRODUCT(SUMIFS(C1:C16,A1:A16,{"a","b","c"},B1:B16,{"aa","bb"}))
it returns only 5
I don't want to use multi formula like
=SUMPRODUCT(SUMIFS(C1:C16,A1:A16,{"a","b","c"},B1:B16,"aa"})) + SUMPRODUCT(SUMIFS(C1:C16,A1:A16,{"a","b","c"},B1:B16,"bb"}))
I want to achieve this using SUMIFS only
I will take out the different sheet references and instead show it as if it all on the same sheet.
=SUMIFS(F7:F1000,D7:D1000,C37,I7:I1000,P2:P5))
Im trying to get this too work.
So F7:F1000, is the data to be added together
D7:D1000 = the year
C37 = 2014
I7:I1000 = category, so this has stuff like (food shopping, fuel, car, bills, utilities etc)
P2:P5 = three criterias ([Balance], [Cashback], [Transfer])
Im trying to sum together the values which is 2014, and has the text [Balance] or [Cashback] or [Transfer] in the category column.
I'm trying to sum data based on a the criteria of a date being between a certain range and sorted by a particular name.
I have included a sample sheet with two tabs:
Totals-I would like to get the sum of the hours a person worked in the range of dates being 1/1/2014-1/24/2014 (which is D1 and E1 in the current charges sheet) Current Charges-this is the page that I would like to gather the information from.
Below is a sample of the formula I was trying to use, but I get an error....my interpretation of what I was trying to input is as follows: Sum C2:C34 in the current charge sheet if B2:B34 is greater than or equal to D1 on the current charges tab (which is 1/1/2014) and B2:B34 is less than or equal to E1 (which is 1/24/2014) with A4:A34 in the current charges sheet equal to A2 on Totals sheet.
SUMIFS('Current Charges'!C2:C34,'Current Charges'!$B$2:$B$34,">="&'Current Charges'!$D$1,Current Charges'!$B$2:$B$34,"<="&'Current Charges'!$E$1,'Current Charges'!$A$4:$A$34,A2)
Test Data:
SUMIFS Test Data.xlsx
Ok here is my dilemma, I am trying to calculate gains and losses by organization. I created a sumifs formula that works on a single page, but it doesn't work on multiple tabs on my summary page.
Here is the data:
HRS DEVIATEDTAILORG0.2OPS-0.3OPS0.8MX0.5OPS-2.5MX-1.5WX-1.5WX
Here is the formula on the same page as data:
=SUMIFS(A26:A40,C26:C40,"wx",A26:A40,"
In my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx
In a workbook I have a tab with multiple columns containing names, activity codes, billed hours, etc. On another tab I have created a budget for which I use the Excel SUMIFS function to check the database in the first tab for relevant entries and add them together in the budget sheet.
Now here's for the tricky part. On the budget sheet the names are not mentioned, only the job titles. So these are grouped together. This means that the first tab shows only names, while the budget tab only shows the function title.
The function I have used thus far is this:
Formula: [Code] ......
The first part refers to the column containing the billed hours, the second part refers to the column containing the names (criteria range 1), the third part refers to a specific name (criteria 1), the fourth part refers to the column containing the activity codes (criteria range 2), while the fifth part refers to a specific activity code (criteria 2).
This works really well as long as the budget tab only mentions the names, yet it only aggegates at the job title level. Would it be possible to use the same SUMIFS function to search the database for, say, all the names that fall within one specific job title? Essentially that would result in this somewhat bulky function:
Formula: [Code] .....
Clearly, Excel doesn't allow this.
I am unable to get the correct results using Sumifs and Countifs function. Below is an example:
If I use the formula as =IF(ISERROR(SUMIFS(F2:F8,B2:B8,"Africa",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"2B",E2:E8,"SY")/F9),"N/A",SUMIFS(F2:F8,B2:B8,"Africa",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"2B",E2:E8,"SY")/F9)
I get the result as 0 but the result i want is 19.67% (1234 /6275). Since i have multiple criterias which might not be available at times in the data, i get the value as 0.
BCDEF2CountryMain Conseq.Other conseq.Product Type Amount 3AustriaInternalNoneInt2B $ 278 4AustriaExternalNoneExt3C $ 900 5AustriaExternal-8A $ 2,388 6NorwayInternal-MV $ 567 7AfricaExternal-SY $ 1,234 8AfricaInternalNoneIntJN $ 908 9TOTAL $ 6,275
Similarly i have used a formula using Countifs; =IF(iserror(countifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=3C")+counifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=2B")/F9),"N/A",countifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=3C")+counifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=2B")/F9)
And even the above formula does not work with the criterias given. What i require is, if the country is "Austria", "External", and "NoneExt" then count those lines which has product Type as "3C", 2B". So the result for the above should be 1.
Request you to kindly let me know the correct way or the right formula to extract data for the above criterias.
=AVERAGEIFS($D$106:$D$2825,$D$106:$D$2825,">"&$I117,$D$106:$D$2825,"<"&$J117)
Returns = 0
But on a copy of the same worksheet, the same formula returns the correct value. Is there something wrong with my formula cotext?
I have a number of cells, with a rule as follows, but within each cell the company name and month vary, over 836 cells, so I cannot do a find and replace so wanted to know if there was a way of adding the following part to the rest of the formula within the 836 cells in one go, rather than tediously going through each cell and copying/pasting.
The part I would like to add to the various cells - 'Master Quote Sheet'!$H$18:$H$6021, "Won"
Existing formula (the varying parts within the different cells are the "02.2014" and "Company Name"
=SUMIFS('Master Quote Sheet'!$J$18:$J$6021, 'Master Quote Sheet'!$E$18:$E$6021, "Direct", 'Master Quote Sheet'!$A$18:$A$6021, ".02.2014", 'Master Quote Sheet'!$D$18:$D$6021, "Company Name")
I am trying to create a SUMIFS function to sum estimated hours for specific systems that do not have a Completed date. I do not want to sum remaining hours if it has been completed. i.e.
=SUMIFS(Hours, System#,"110-000-00, Complete (Date), ISBLANK)
System #
HOURS
Complete (Date)
110-000-00
0.5
210-000-00
0.5
[Code] .........
I have a SUMIFS formula that I am having trouble with. I am trying to check the following:
=SUMIFS(NFCU!$G$5:$G$298,NFCU!$E$5:$E$298,NFCU!$H$2,NFCU!$A$5:$A$298,"<e1")
The range NFCU!$A$5:$A$300 is a column of dates. The evaluation of "<e1" does not seem to evaluate. However, when I change "<e1" to a date value of 41760 it works. How can I reference a field rather than the raw value?
How would I convert the following formula into Excel 2003?
=SUMIFS($Q$7:$Q$5000,$O$7:$O$5000,"Cat",$P$7:$P$5000,"Dog")
have this formula..
=SUMIFS(Sheet2!$D$2847:$D$3065;Sheet2!$I$2847:$I$3065;$B$6;Sheet2!$G$2847:$G$3065;$C$6;Sheet2!$B$2847:$B$3065;A14)
D2847 - D3065
includes Numbers..
lets say.. i want every cell counted which has in these range the first two numbers..
every cell has..
5052
5053
5054
4060
4050
so i count the entries which has 50.. so in total it gives a result of 3. Not summing them, just count the entries that has the first two numbers "50" in every row..
The Red Markings can be replaced, the rest should stay.. it is needed due different criteria.....
Need convert the following formula so that it would work in Excel 2003: =SUMIFS($BB$4:$BB$500,$E$4:$E$500,"Abbeywood First",$L$4:$L$500,"Autumn"). I could play around with it for hours and get nowhere, so I'll just turn to the experts.
View 5 Replies View RelatedI have some sumifs() functions in cells in a workbook that contain external links in them:
Code:
=SUMIFS('C: empForAuditor[Budget Employees 2013 (0055521).xlsm]Labor Summary'!$E$54:$E$88,'C: empForAuditor[Budget Employees 2013 (0055521).xlsm]Labor Summary'!$C$54:$C$88,$G50,'C: empForAuditor[Budget Employees 2013 (0055521).xlsm]Labor Summary'!$A$54:$A$88,H$49)
The formulas work fine if the external file is open. However if the linked file is not loaded and I load the file with the external links, as soon as the file with links is calculated, some of externally linked cells turn to "#VALUE" errors. I have a need to have only certain people see the employee file that is referenced above but the others need to update the file with the external links and not have errors in cells.
The really weird thing is that some cells yield the #VALUE error and some don't, even when both have SUMIFS() functions in them. Even cells with the Exact same formula in them will sometimes yield #VALUE and other times yield a real value.
I have the below formula working correctly. However the issue is when it pastes and fills down values its using H1 reference in the formula even when it goes to the next column. So basically when it goes to cell I2 it should update the sumifs formula to lookup I1 instead of H1 and so on and so forth for all columns till the loop stops.
VB:
Sheet1.Activate
Dim frmla As String
frmla = "=SUMIFS($C:$C,$A:$A,H$1,$B:$B,$G2)"
Range("H2").Activate
Do Until ActiveCell.Offset(-1, 0) = ""
ActiveCell = frmla
ActiveCell.Offset(0, -1).End(xlDown).Offset(0, 1).Activate
Range(ActiveCell, ActiveCell.End(xlUp)).Select
Selection.FillDown
ActiveCell.Offset(0, 1).Activate