I currently use the following formula: =workday(H21,H23,J20:J34) which calculates my date based the date entered in cell H21. While testing I realized that I needed to add another variable to the formula for a specific scenario. When my Date in H21 is less than todays date I require another workday formula to be calculated. How can I add this if statement to the existing formula?
View 2 RepliesI have lots of data in the form of names, and i want to extract all rows of data for that name. So if name "john smith" appears in column A 7 times, i retreice 7 rows of data.
My formula is this...
=IF(ISERROR(INDEX($A$1:$C$7,SMALL(IF($A$1:$A$7=$A$10,ROW($A$1:$A$7)),ROW(1:1)),2)),"",
INDEX($A$1:$C$7,SMALL(IF($A$1:$A$7=$A$10,ROW($A$1:$A$7)),ROW(1:1)),2))
This works perfectly and it gives me my 7 rows of data if i type in "john Smith" into A10, however, i want one more condition to be met in column C, whereby Column C is made up of either 1, or 0. If its a 0 i am not interested, if it is a 1, i am.
I have an existing formula in a cell linking back to a start date only. determining how to add an additional formula to exclude weekends, and possibly holidays.
View 2 Replies View RelatedThis task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
In my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx
I'm trying to add either a new condition to a formula or modify existing formula, so blank cells can't be taken as a number like 0 Here is the formula =IF(N14>0,1,0)
***This is what I do with formulas with similar problems =IF(COUNT(Y14,A14)=2,Y14/A14*100,"")
unfortunately the above condition its already a condition by itself so I don't know what to do whether to modify condition or add a new condition which I don't know how to do.
How can I have an if statement or other type of formula look at a date and add 26 months and determine if it's 26 months old yet.
example
assuming that November 4, 2005 is one day from being 26 months
as of today That cell next to it would say "Available"
Then the next it would say "Retired" because it hit the 26 month old period.
I need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedI have a data input worksheet, which uses the following code to fill in the missing zeros when cells are empty.
View 10 Replies View RelatedStill finding the SUMPRODUCT function a bit challenging to fully grasp.
This formula works great to sum the miles (Q16:Q38) the team (A16:A38) drove in a particular month (B16:B38)
=SUMPRODUCT(--ISNUMBER(MATCH(A16:A38,INDIRECT(E3),0)),--(MONTH(B16:B38)=E7),Q16:Q38)
How would I expand it to check yet another column say (S16:S38) for the term " Charge Call" ?
So I can see the miles the team drove in March for all the charge calls.
Where can I go to study and learn more about SUMPRODUCT. Seems like just what I need to build interactive type dashboard reports.
I have a very simple lookup formula (eg: ='data'!C1) that I need to copy down about 4000 rows. The difficulty is that I need to miss out 5 rows in between each paste but no matter what I try when copying it down, it throws itself out of numerical order. I have tried to type the formula manually for every row but its taking forever and is bound to go wrong at some point. I have attached a very small example to show what I mean - Imagin this example needing the formula to run down in order up to row 4000?
View 2 Replies View RelatedI currently have 6 formula (see below) that I want to add another variable for. The formulae add together letters in B1:B15 cross referenced against numbers in A1:A15. The first formula adds together the A's and O's in B1:B15 and cross references them with with cells beginning with 5 or 6 in the same row, A1:A15 down.
=SUM(COUNTIFS(B$1:B$15,"A",A$1:A$15,{"5";"6"}&"*")+COUNTIFS(B$1:B$15,"O",A$1:A$15,{"5";"6"}&"*"))
=SUM(COUNTIFS(B$1:B$15,"B",A$1:A$15,{"5";"6"}&"*"))
=SUM(COUNTIFS(B$1:B$15,{"A";"O"},A$1:A$15,"4*"))=SUM(COUNTIFS(B$1:B$15,"B",A$1:A$15,"4*"))
=SUM(COUNTIFS(B$1:B$15,"A",A$1:A$15,{"1";"2";"3"}&"*")+COUNTIFS(B$1:B$15,"O",A$1:A$15,{"1";"2";"3"}&"*"))
=SUM(COUNTIFS(B$1:B$15,"B",A$1:A$15,{"1";"2";"3"}&"*"))
I want to cross reference each of these with a Gender variable (denoted as M or F, for male & female) in the C1:C15 range. Using the last formula as an example should tell me how many M's or F's in the range C1:C15 had B and began with either 1,2 or 3.
I need to replace the values in the braces with the values in Column A. Is there an easy way to do this or am I stuck with doing each one manually? There are 92 lines in Column A.....
View 9 Replies View RelatedI am trying to write a macro that should be able to copy existing row and insert values and formula into a new row just below the row. As an example below:
A
B
C
D
E
001
ADESF
500.00
1001210
EMF
The values in column C and D for the new row will be the same.
I'm preparing Quarterly Evaluations, and am having an issue because an Analyst has superseded an overall percentage goal. In the attached example, it is the overall evaluation with the 'problem data' in red D19 and highlighted.
I'd like to add a condition that limits the points in D19 for 'responsibility 3' to 150.
=IF(ISERROR(C19/B19)*(B10),"-",(C19/B19)*(B10))
*just a note for clarification, the other two responsibilities are a 'per hour' weekly goal, whereas the 3rd is an overall personal effort divided from the overall team effort.
I'm currently doing a new worksheet for work
Cell's A1: Commission Per Sale Cell B1 Running total of commission
I would like the running total to continuously incorporate all of the above commissions and this has to be in the column next to the new sales commission.
E.g.
Commission $5 $7 $9
Running Total $5 $12 $21
I run the following formula down a column of records in row AR
=IF(COUNTIF(lookup!A:A,N2)>0, "Exclude", "Not In Lookup")
I want to add to this formula an additional function that if any cells in column A1 are blank, then do not perform the remainder of the equation.
--------------------------------------------------------------------------------
Ok i have a formula that i use to convert bond prices, which are in 32nds to numbers that excel can understand. I use the formula:
=LEFT(F7,FIND("-",F7)-1)+SUBSTITUTE(RIGHT(F7,LEN(F7)-FIND("-",F7)),"+","")/IF(RIGHT(RIGHT(F7,LEN(F7)-FIND("-",F7)),1)="+",64,32)
This allows me to type 101-16 in and excel recognizes this as 101.5
My problem is that my data I am copying into the sheet is often in 1/8ths. So the price will come in as 101-272, which means 101-27 and 2/8 (or 1/4).
I admittedly dont understand this formula and just use. Can someone help me tweak it to recognize the third digit?
I'm currently applying these formulae manually, and also instructing other people to do the same, due to my lack of understanding of macros. Hopefully someone can give me some instruction as to how to do this automatically. I'd like people to be able to open sheets sent as normal CSV's and apply a macro to get them into the right format, changing only rows with data in them.
These are the instructions I'm currently sending:
In cell n1 enter:
full phone number
in cell m2 enter:
=RIGHT("00000000" & J2,8)
Drag m2 to last record
In cell n2 enter:
=CONCATENATE(61,I2,M2)
Drag n2 to last record
In cell o1 enter:
Date of call
in cell o2 enter:
=DATE(MID(C2,7,4),LEFT(C2,2),MID(C2,4,2))
I am trying to apply named cell from another worksheet to existing formula.
For example I have a formula in sheet2 which looks like =sheet1!A1+sheet1!B1. I then subsequently name sheet1!A1 = Jan and sheet1!B1 = Feb. Thinking that if I apply these names the formula in sheet2 would look like =Jan+Feb. However I get the message "Microsoft Office Excel cannot find any references to replace" when I try to apply the names using Excel menu "Insert - Name - Apply".
I'm currently using the following formula to return values rounded down to the nearest 2.5: =FLOOR(X8*1.25,2.5)
This works fine but I would like to put in place a system where if the "X8" value is 1 the formula produces a 2.5, and if the "X8" value is 10 or greater the formula produces a 10.
Currently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.
This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"
I have a file with many different row sizes and after calculating the figure, we will need to add up the total for a particular job. Due to the irregular data on each job (some with only 1 line item where sometimes the job have few line items).
The cell to sum already has a formula for the data.
For example, I already have a formula on Column L to get the figures. After few line items, I will need to add a total to the lines item, also on Column L. I think we can uses 2 sets of data from 2 different column as "pointers", Column D and the formula column itself (but I don't know how to). The columns that I need a sum function will be from Column L to X. After doing the sum, can we at the same time draw a sum line? (single top line and double bottom line).
Am I being "too greedy" ? Imagine if we have more than thousands lines of such data to be added manually and to draw these lines manually.
I need a script that will search through a selected range of cells and add a simple IF statement.
For simplicity, lets assume the desired range is Q36:Q40. (The range is much larger than that.)
The existing formula is:=IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37))))
I would like to keep all existing forumulas, just tack on an IF statement before hand that says if a certain cell (Q2) reads "CoPrep" then do nothing, otherwise use the existing formula. I envision this as =IF(Q2="CoPrep","",IF($Z37="%Sales",Q$9*$Y37,IF($Z37="%BS",Q$78*$Y37,IF($Z37="%YOY",O37*(1+$Y37)))))
FYI, the background to this problem is that I am in the process of making a financial forecasting model that allows for choices of company prepared forecasts, hence "CoPrep", or model forecasts based off of other critera, both of which can be sensitized.
if-and-or statement if possible. The formula would go in cell A10.
If D5="x" and D4=7, answer would be "H8", if D4 is blank, answer would be "x".
If D5=2 or 3, and D4=7, answer would be "H8", if D4 is blank, answer would be "v8".
If D5=1 or blank and D4=7 or blank, answer would be " ".
I am a sales rep and am designing a spread sheet to help me track my commissions, on occasion I need to split the commission with another rep I have the spreadsheet set up as follows:
J1 Dollar amount - the total amount of the sale. K1 fee% - my fee is negotiable so this number will vary by client this field is formatted as a precentage. L1 total commission - takes J1*K1 to give me a $ amount M1 split y/n - here is my question, i would like a formula that will divide L1 in half if I type a Y or Yes in M1 I'm sure this can be done but I dont know how, also would the formula go in L1 or M1 if I want the results to be displayed in L1?
I'm entering a simple IF statement in excel that asks if one cell is bigger then another. However one of the cells I'm referencing is also a formula, so excel is not reading the value in that cell. How can I get around this problem? Is there anything that will enable me to compare just the value of that cell? I have attatched the file and the cell in question is F21.
View 5 Replies View RelatedHow to increment a formula with an If statement that transforms 2 values in time format and then as long as these two values keep beeing added in the cells the formula keeps active in the column.
I tried to apply the code for all the but this makes my file huge like 20MB!
You can check this on the file, go the "records" sheet, add the time in the "shift start" and "shift end" fields, then the difference value goes to "hours" in the sheet.
[URL] .....
I'm trying to use an if statement with a LEN function, i want to say if column O2 is 5 characters long then populate with Y if not populate with N.
I have tried.
=IF(LEN(O2,5),"Y","N"
but it doesn't work?
I need a Count formula with an If statement to count how many accounts in column A have a start date (column B) greater than today?
View 4 Replies View Related