I have a workbook with a worksheet that contains 25+ graphs. The users scroll thru them vertically or hit print. I'd like to add a form that would sit on top of the worksheet that would have hyperlinks to various sections of the charts so the users can jump to a specific area w/out scrolling.
Is this possible and how would I do it. I know how to add hyperlinks to worksheet. I am not sure if/how I could add a form and have the hyperlinks therein.
All i did was i just created a form to open a workbook from the directories.
Code to copy the data from that recently opened workbook to my workbook where I have my forms. I need to copy that data as in the case that i don't know the workbook and the sheet name i'am going to open as i may open any of the files!!
Can I search a document without opening it?
If not how do I open a file if not already opened without using "ON ERROR"
I have problem on trying to copy value from another workbook in specific folder this my marcro that i record
Code:
Sub Macro3()
Windows("TSOM_SLA_daily_20130207.xls").Activate
Cells.Select
Selection.Copy
Windows("Autoreport.xlsx").Activate
[Code] .........
Below code that is about filter code, but above what is the code for import the value (only value don't need any format).
I want to use VBA button because it will be easier for next time if i want to update my work.
I have a hundred or more spreadsheets that I will be applying a utility to. I want to use one button on each sheet to call a form in the utility workbook. That form will have buttons that call individual parts of the utility.
I tried application.run("utility.xlsm!frmStart"). No dice.
I also tried: "utility.xlsm!frmStart". Same result.
How can I overcome this.
The reason I want my forms in a different workbook is the difficulty with maintenance and installation.
I kindly would like to have a form pop-up, when I open an XL workbook.
Once, then the user clicks OK, and all sheets are shown.
How to display the userform when the workbook is opened?
View 9 Replies View RelatedHave 2 workbooks very similar and need to copy a working user form to newer workbook. Exported and Imported the user form to the new VBA project but can't figure how to bring user form into the new worksheet.
View 9 Replies View RelatedHow can I import specific cells from say Workbook A and B to Workbook C automatically? For example. As I type in a cell in Workbook A then Workbook C reflects it straight away. Same as when I typ in Workbook B the C updates automatically. The end result will be that Workbook C automatically updates itself to show data from specific cells in Workbooks A &B.
View 1 Replies View RelatedI have a code that copies a column data from one workbook to another workbook
[Code] .....
This copies only D column to A coulmn of another workbook
I want 2 more columns to copied and pasted in another workbook
G column---- C Column
H column---- E Column
Is there a way to have an open user form and still be able to navigate in the current workbook/spread sheet(s)?
View 6 Replies View RelatedI have a userform, when using the form it has focus, once I click on my "Ok" command button I want to return focus to the workbook while I leave the userform open. I already have the userform open and on top of the workbook.
View 2 Replies View Relatedi'm trying to put together a spreadsheet using excel 97 that uses forms for data input & display - the spreadsheet itself is used solely for data storage & no editing is done directly to ensure people aren't trying to mess about with the spreadsheet i thought it would be an idea to minimise excel when the spreadsheet is launched & have the forms pop up on screen instead. the problem i've got is getting the first form on screen whilst excel is minimised
Private Sub Workbook_Open()
frmSplash.Show
Application.WindowState = xlMinimized
End Sub
the spreadsheet launches, the splash screen launches, but excel doesn't minimise
if i use
Private Sub Workbook_Open()
Application.WindowState = xlMinimized
frmSplash.Show
End Sub
the spreadsheet minimises, but the form doesn't display - the excel taskbar button flashes to indicate something is going on clicking the taskbar button brings up the form & keeps excel minimised....but the staff who will be using this won't be happy with this at all!!!
I have an excel file with data in it.I also have designed an user form so that the user can select few options in that to filter the excel file and get a new file. The reason i am doing this is because the people who are going to use this do not have any knowledge of excel. In the sample attached, the tab "Data" has the data in it. The User form should filter this particular sheet and throw out a new file. In the userform, I have mentioned the fields to be filtered.
View 2 Replies View RelatedI need to filter data based on criteria based on user input form that is in another workbook. For example, I have a list of departments, I want to create a userform for the user to enter department number and then have excel filter only the data belonging to that department. The person will then update the department records and save the file.
Here is partial code I have been working on but having difficulties:
Dim FilterCriteria
Dim CurrentFileName As String
'Get the current file's name
CurrentFileName = ActiveWorkbook.Name 'how do I call another workbook?
[Code]...
I have a form that displays when i open a workbook. I enter data into the form's fields (listbox & textbox). When I click the form's "OK" button, the focus doesn't return to the current worksheet, and in fact, focus doesn't return to any of the open windows / applications I have open.
View 9 Replies View RelatedI have the following code that displays a form at a user defined time and if the user does not press "Stop" then the workbook saves and closes. The user can press stop then the workbook remains open.
Here is what I have where:
Admin_Auto_Shutdown = Yes or No
Admin_Auto_Shutdown_Time = 3:34pm or user defined time (This doesn't seem to work??)
'Auto Shutdown CloseandSave
If UCase(wb.Worksheets("Admin"). Range("Admin_Auto_Shutdown").Value) = "YES" Then
Application .OnTime TimeValue("Admin_Auto_Shutdown_Time"), "AutoShutdown"
End If
Sub AutoShutdown()
Application.OnTime TimeValue("Admin_Auto_Shutdown_Time"), "AutoShutdown"
Auto_Shutdown_Form.Show
End Sub
Now, my question is about a timer that I can show on a form. When the form is displayed I would like to give the user 30 seconds to press stop (and keep the workbook open) or to press proceed and save and close or to not do anything and the workbook would close and save when the timer reaches zero.
Code for user form which is missing most everything...
Private Sub Halt_Click()
'If user whats to continue without closing
Auto_Shutdown_Form.Hide
End Sub
Private Sub Proceed_Click()
'If user whats to save and close
Auto_Shutdown_Form.Hide
How do I add a timer to this code where it will run this at the end of the timer?
Auto_Shutdown_Form.Hide
Application.DisplayAlerts = False
With ThisWorkbook
.Saved = True
.Close
End With
I'm developing a workbook containing 121 sheets. Sheet 1 is effectively an index, and uses 120 form control checkboxes to unhide and display the selected sheets individually.
The code I'm using for each checkbox is below and is in a module.
I'm trying to use an offset loop to write form data onto a closed workbook. It works fine when the sheet is blank but as soon as I fil the first row it sticks when running. I'm not getting any error in the code and am at a bit of a loss.
Here's what I'm using:
Do
If IsEmpty(ActiveCel) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell.Value = txtName.Value
[Code] .........
I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies View RelatedI'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
View 2 Replies View RelatedI'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
View 3 Replies View RelatedI am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS
Sub RecallQuote()
'
' RecallQuote Macro
'
Sheets("Form").Select
Range("C2").Select 'this is the cell that holds the quote number to look up from the table
[Code] ......
I have a spreadsheet I use to keep track of weekly sales patterns and use for estimating the amount of a product I would need to order taking into account what I would expect to sell in a given week and what stock I have at present. On the example I've attached, I show where I enter my storeroom count figures, which are organised by supplier and the position in which a particular product appears on the supplier's order form. I have a page which lists the orders by suppliers and which are used to place the orders by e-mail or telephone.
At present I have each supplier section of the order form directly linked to a cell on the storeroom count as per columns K to M on the attached file. However, this means that as products are de-listed by suppliers and extra products become available, I have to edit the formula in each cell as the products now appear in a different position on the storeroom count and may otherwise end up on the order form for a different supplier. I would like to set it up so that I just have to select the supplier name and the table below will automatically fill with the required info, in order of the position they appear on the supplier's form. I'm struggling to combine vlookup and hlookup. Is there a way to do it or do I need to rethink?
I'm trying to pull up a second form from a command button within a form. There's a command button in a sheet to open the first form (frmOrderInput.) Then there's another command button in that form to open the second form (frmPriceInput.)
The Module to open the first is this:
I have got a userform that fits my 24inch monitor screen perfectly, however it doesn't fit other screens. How do I get windows style scrollbars added to the form so people can use these to see the whole form?
View 3 Replies View Relatedfind the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have two forms...clicking a specific button on the first form should display the second form which works fine.
VB:
Private Sub Image_Employees_Click()
Form_Main.Hide
Form_Employees.Show
[Code].....
When I do this twice, however, the second form seems to freeze/hang and I have to close Excel and then re-open it. I feel like I'm overlooking something obvious...
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub