I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies
I have an Excel 2010 workbook with many worksheets using hundreds of Form Control (not ActiveX) checkboxes. I need a bit of VBA to change Checkbox background color of each checkbox whenever the user checks the box. I assume this needs to be a click event? I don't even know the Checkbox property name I need to change I'm learning VBA as quick as I can
View 4 Replies View Relatedcode below whould return value "a" to specified range(s) The cells are formatted Marlett, 10pt, black, bold, center. Should return a nice tick mark to the specified range if selected shape has value of 1. I double chk'd the name of the shape referred to in code and it is correct Yet value of "a" is not returned, though the chkBox is "ticked". What else can I check?
Option Explicit
Sub cv_ReviewCheckBoxes()
Dim wbBook As Workbook
Dim wsNotesLoose As Worksheet
Dim wsCoinRolled As Worksheet
Dim wsCoinLoose As Worksheet
Dim wsSummary As Worksheet
With Application
.Calculation = xlCalculationManual
.DisplayAlerts = False
. ScreenUpdating = False
End With.........................
I have a series of checkboxes, we'll say checkbox 1-5. These are all listed on a sheet called products.
If for example you select check boxes 1,3 and 5 I need those to then be listed in a column in that order on another sheet called purchased.
If I went back and then uncheck 3 and check 4 then purchased would be updated.
I understand that if you take a cell and name it P1 for instance..and then on another sheet enter =p1 in a cell that they will update and share data, but I dont know how to pull from a check box..nor do I know how to assign a row of cells to accept multiple and changing information from those checkboxes.
I have a userform where the textbox already pulls data from a worksheet. I have a checkbox next to the textbox, If the checkbox is true it finds the textbox value on a worksheet and using Offset it inserts "yes" in the next cell.
View 6 Replies View RelatedI currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click()
Dim rClSkills As Range
Dim rClLookup As Range
Dim var1 As Integer
Dim iDecision As Integer
Set rClSkills = Range("TblClSkills")
Set rClLookup = Range("ClassLookup")
iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?")
If iDecision = vbYes Then
var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0)
If CboAppraise.Value = True Then.............................
Is there a way I can make my check box change color when it's checked? I'd like to have it uncolored and then turn green when checked. Not the cell, but the checkbox itself. I can't seem to make the check box part of the cell, if that would be an easier route to go please let me know. If I have to turn the cell green and not the check box, I'd love for the whole row to turn green.
View 3 Replies View RelatedI wish to do the following & and am struggling (attempted to do it in Conditional Formatting but have not succeeded)
I want to do the following :-
If the date in cell A1 has no date entered i.e blank then fill D1 in Yellow If a date in cell B1 is past then fill Cell D1 Red If a date in cell C1 is entered with a date(any) then fill D1 in Green
I'm developing a workbook containing 121 sheets. Sheet 1 is effectively an index, and uses 120 form control checkboxes to unhide and display the selected sheets individually.
The code I'm using for each checkbox is below and is in a module.
I'm having an issue with counting the number of check boxes that are checked.
In cells B2 thru B6 are a the initials BA or CS
In cells D2 thru D6 are the check boxes
I've linked the check boxes to F2:F6
I also need it to be able to differentiate between the two sets of initials. If tried this thus far
In cell C9 =if(B2:B6="BA",COUNTIF(F2:F6,True))
In cell D9 =if(B2:B6="CS",COUNTIF(F2:F6,True))
I am getting a #VALUE! I've tried rearranging the brackets, but can't seem to get this to work.
I have 110 checkboxes on a sheet. User checks some of them. After he is done, I need to know the total number of boxes checked. I wrote a simple loop but there is some little error. Essentially I am trying to have Sub go box by box and see which one of them is checked:
With ActiveSheet
b = 0
For i = 1 To 110
If .Shapes("Checkbox" & i).OLEFormat.Object.Object.Value = True Then
a = 1
End If
Next i
b = b + a
MsgBox b
End With
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
How to create checked and unchecked checkboxes based on three criterion(in sheet 1)?for clear explanation..it will be like this...firstly,the "SELECT TAKEN only"checkbox will checked/unchecked row d20:r20.secondly,the "SELECT RETURN only" checkbox will checked/unchecked row d21:r21 and so on.lastly,"SELECT ALL" will checked/unchecked all the rows.
Checkbox1.xlsm
Any way to change the font color of a chart axis when a checkbox is set to true.
let checkbox be checkbox5 and chart be chart5. What I would like to happen is that if checkbox5 is true then the font color of the horizontal axis changed to grey (RGB 166,166,166), if it is false then I would like the font color of the horizontal axis to be black (RGB 0,0,0). I also would like this macro to be run every time the checkbox changes, or the corresponding cell changes to TRUE or FALSE (it is in another sheet, say sheet2). This is the code I have so far but all it is doing is showing the chart as selected and not changing the font color. I would also like it to not physically select the chart, this is for a dashboard so the selecting of the chart throws off some of the visuals a bit, but not sure how to do change the chart values without selecting it.
[Code] ......
I have a command button and ten checkboxes - one for each row of a list. I need a macro that will delete the rows of every checked checkbox when I press the command button.
The list starts in row 3 and continues to row 12. Checkboxes are checkbox1 for row 3 to checkbox10 for row 12.
I have a code in my workbook that Runs another ceo on close. It is:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
EmailOFA
End Sub
What I would like to do is have a checkbox that if checked then this code will NOT run. Can this be done?
In a perfect world what would happen is that once an e-mail was sent once then the checkbox would automatically be checked so that there is no possibility of OFA being e-mailed twice with the same info.
Is it possible to have a message box pop up when a checkbox is checked?
I tried the code as per file attached but cannot work; It requires a direct input into the cell.
When I check the box, I would like the autofilter to come on and select a range & criteria which I have managed. When unchecking the box, the data returns back to normal but the filter stays on the range. When I now check the box with the filter on, the code does not work. I need the filter to stay on if already on.
View 4 Replies View RelatedI am attempting to write a program using a form with multiple checkbox buttons, which will highlight cells based on whether the checkbox is checked (highlighted) or not checked (no formatting). I can get it to highlight fine, but I cannot find a way to determine with code whether or not the checkbox is actually checked, so that I can have the program unhighlight when the box is no longer clicked.
I'm not entirely sure how to further explain that so I will use an example. Imagine a checkbox which can show a window when "checked" and when " not checked" hides the window. I am able to get the window to appear in the first place, but am not certain how to hide the window once the user presses to uncheck the checkbox button. If that is not clear let me know and I'll explain it more indepth as I am not entirely certain how to explain it.
If cells A1 to A10 are filled with content and from range B1 to B10, only B3 and B7 are filled with content, I want Excel makes a string without spaces, just from the rows which have been filled in column A and B.
For example:
A B
1 car
2 tree
3 money tree
4 fruit
5 ball
6 food
7 water park
8 bread
9 joke
10 boat
The string I want Excel generates should be: moneytreewaterpark
So I need all the words in one string but Excel has to exclude every value from a row if the cell in column B is not filled with content. If the string is generated, is it possible to make an hyperlink from this string and open automatically in internet browser?
I have a workbook with a report on Sheet1. If the checkbox in column N is checked, I need the data from that row (column A-S) to be cut and pasted on the next available row on Sheet2. I am still new to VBA/macros. Would this be better if I made a button to update the sheet every morning or could it be automatic when the checkbox is checked (preferred).
View 6 Replies View Related- I have 2 checkboxes and I need run macro, if one of this checkboxes are checked (if checkbox1 then run macro, if checkbox2 then run macro2)
- If this checkbox is checked run macro every "xy" minutes, and this "xy" is written in cell I1 (for checkbox1) or I2 (for checkbox2)
I add my excel for better understanding
I have a worksheet which includes in column A a date in the format dd/mm/yyyy what I would like to do is have a checkbox control on the same row (and this would be the same for all the rows on the this worksheet) and when it is checked it updates the value of a cell on another worksheet within the same workbook with the date from column A. i sort of know how to do it on an individual basis but was wondering what code could be applied to a 'finished editing' button which would then check the state of the checkboxes on the sheet and update the values on the other sheet. I'm afraid my knowledge of VBA is poor when it comes to the logic of things...
View 2 Replies View RelatedI want to add a checkbox that when checked, copies a value (E3) in the row and pastes it into another cell on the same row (G3). I would also like for it to be cleared when unchecked.
View 8 Replies View RelatedI do have an excel workbook containing two sheets:
Sheet1 contains a list of 30 criteria, every one with its own check box (TRUE/FALSE).
Sheet2 contains a database of items, which columns contain the 30 criteria mentioned above. (So sheet1.criteria1 can be the only value of sheet2.column1)
I am trying to program a macro, which can be assigned to kind of a "submit"-button in the first sheet. Its purpose should be to open a new third sheet and listing all the items from sheet2, which contain values checked=TRUE in sheet1.
Lets keep it simple. I have a userform. On the userform are 4 checkboxes.
Checkbox1 is checked by default, the others are empty.
On command click I need to pass the values to a called sheet.
I am creating a main worksheet (Legend) in which information will be entered and then populate to other areas (worksheets) within the workbook. I would like to create a print macro - that will run and print all the worksheets that we have selected on the "legend" page. These worksheets would have been selected by ticking a check box.
My question is how to associate a check box to a worksheet? For example - the second worksheet is named " Schedule A" 3rd "Schedule B" and so on.
- The check boxes will be name schedule A, Schedule B and so on.
- I would like to associate (link) the checkbox Schedule A with the Worksheet of the same name. Then when this checkbox is selected, and the print macro runs it will print the worksheets that are selected.
I am working on a spreadsheet where multiple inputs are entered by a user in certain cells and ranges. I would like to block the ability to enter values in a certain range based on the condition of a check box in the spreadsheet. I do not want to delete or hide the range. Does anyone know a simple command to either allow or not allow input in certain cells/ranges?
View 3 Replies View RelatedI need to copy all the cells to a "new worksheet" if the checkboxes are checked.
I have thousand of cell in here but i just narrow it down in this example.
example:
A B C D E F G
21 22 23 24 25 26 checked
31 32 33 34 35 36 unchecked
41 42 43 44 45 46 checked
51 52 53 54 55 56 unchecked
there is a command button in here that when it was click it will open a "new worksheet",
what I need to see in the new worksheet is this:
A B C D E F
21 22 23 24 25 26
41 42 43 44 45 46
I have a userform with a CheckBox and a ListBox. Is there a way to have the CheckBox to automatically get checked if a selection is made in the listbox?
View 9 Replies View Related
