I have two spreadsheets that use a Number as a Key. I need to compare the numbers on list 1 to the numbers on list 2 and add any values that exist on list 1 but not on list 2 to the end of list 2. List 1 is in Column B, List 2 in in column C of a different sheet in the same workbook.
View 2 RepliesI have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
Code:
Private Sub cmdCancel_Click()
Unload Me
End Sub
[Code]....
I have a list of names in B8:B200 (unique)
I have another list of names in I7:I15
I want to count how many names in B8:B200 that matches any of the names listed in I7:I15.
I need a formula to check if anyone from the Old employee col(B) exist in current employee column(A).
A B
Current employees Old employees
A C
B G
C T
D
E
F
G
In an excel file I have 2 lists of files. List #1 has about 6,000 filenames and List #2 is a subset of List #1.
I am looking for a solution which will help me highlight/identify those files which are also in list#2.
Ofcourse one way is to sort both lists and then place them in consecutive columns (say column A and column B) and then in another column (column C) use a IF function to identify if A1=B1 (or A1 <> B1) and then take it from there. However this approach helps a litle becuase there may be a gap in List#2 and thus for a great # of cells in column C i will end up getting false answer. Hope you're following me??
The underlying requirement for this is rather lenghty so I'm skipping those details. However I would like to share that so far and whenever I come across doing this exercise (about 3-4 times a month), I ended up achieving the results but it takes me hours.
I'm attempting to add a variable number of worksheets (dependant on the number of entries in an existing list), then rename those sheets to the name of the entries in that list. i.e.
LIST
A
B
C
With the list above, i'd want 3 new sheets added, one named 'A', one named 'B' and one named 'C'.
The trouble i'm having is that because the number of entries/sheets varies, i don't want to refer to 'Sheet1' 'Sheet2' etc. to rename them.
***Additional Info*** the first record in the list is always "W4" on sheet "Data"
Below is where i've got to so far (however, i'm pretty new to this so it's almost certainly not all that efficient!)
Sub setup_1()
Sheets("Data").Select
Range("W4").Select
[Code] .......
I have two columns of account numbers. Column A would be considered the master list. Column B is data that changes on a monthly basis. What I would like is for a macro to compare column B to Column A and if it finds any account numbers not listed in column A it will insert a row into column A and copy/paste the account number from column B to A. Both rows are sorted assending so if its possilbe I would like the macro to insert the account number where it belongs or maybe just resort column A once it has finished. My knowledge of macros/VBA is very limited at this point
View 2 Replies View RelatedI have a problem with finding the value in column B that is found within a range eg: <=1 & >=5 and return the corresponding values found in column A. kindly refer to the attached sample for reference.
View 2 Replies View RelatedI am trying to list the row addresses for found cells, however I am not sure how to achieve it, below is my script.
Code:
Option Compare Text
Sub TestN()
Dim rng1 As Range
Dim s1 As String
Set rng1 = Range("A1:A100")
For Each cell In rng1
If cell.Value = "Help" Then
[code]....
I am working for a non profit humanitarian org and I am trying to modify an excel 2003 spreadsheet to change the formatting (color) in one cell based on the value of another cell. Obviously this is easy with conditional formatting, except that I have a list of around 25 unique values and formats.
Could anyone point me in the direction of some code that can do this? I am a relative novice to Excel when it comes to VBA and scripting things.
I have two worksheets. Worksheet One and Worksheet Two. In Worksheet One Column A is a list of numbers. I want to look for all of those numbers in Worksheet 2 Column A. Any of the numbers in Worksheet One Column A that are not found in Workseeht 2 Column A I want to list in Worksheet One Column B. I do not want to compare cell to cell but if any number in the first column is found in any position in the second column.
View 3 Replies View RelatedI have a list of email addresses in column A of a sheet1, and a list of "Do Not Send" email addresses in column A of sheet2. I'd like to have a macro that would delete any cells in column A sheet1 that were listed anywhere in column A of sheet2.
View 5 Replies View Related1. Write a sub that captures the existing lists in two arrays and then creates three new arrays of::
a. Customers who purchased only last year,
b. Customers who purchased only this year, and
c. Customers who purchased in both years.
2. After these new arrays have been filled, write their contents in columns D, E and F of the worksheet Auto Merged Post Until 24 Hrs Passes;I do not know how to do part C.
You can find attached the workbook I am working on.
In my workbook I have four sheets. Only two sheets are relevant in this case: "Sheet1" and "List". On "Sheet1" there in column A there is big range of codenumbers (highlighted with red).
On the "List" worksheet I have a smaller list (highlighted with green).
I have a code also in module1 but the code is not working.
I would like my macro to do the following. Check the code number from the "List" worksheet (green) and search for it in "Sheet1" column A (red). If this codnumber can be found in column A then leave the number on the green list. If it cannot be found in column A then, delete it from the green list. If you open the file, you can see on the "List" worksheet that there are three code numbers in the green range. The upper and the bottom code number can be found on the "Sheet1" column A (red) range, but the middle number cannot be found. So if the macro would work correctly then it would delete the middle number, and leave the other two untouched!
I'm trying to place a pivot table in an existing sheet in order to have a list of names next to a P&L. I've got several criteria to filter the names, but when I apply the filters to the pivot table, not all the people show up. The weird thing is that the total at the bottom of the pivot table, which is a simple sum of time in a given month per person, calculates the correct number as if all the employees are there.
When I do the same table in a fresh sheet, in the same file, it shows correctly. It's only when I try to put the table in an existing sheet that it abbreviates the list.
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
I have long text values that include names in cells A1:A100.
In cell D1:D10, I have a list of names that I would like to check if any of them is found in each of the cells in A1:A100 and if yes, return TRUE in column B.
So in a way, what I need is a a bit like the SEARCH function, only that I need to find multiple FIND_TEXT values. If just one of the names in D1:D10 is found, the formula should return TRUE.
I need to be able to export a project list to Excel and overwrite the contents in an existing Summary Report with the exported list. Is this possible? I am using SharePoint 2013 and Excel 2010.
View 4 Replies View Relatedi have list in A2:A4 (description) and B2:B4 is the Group of.
now i want B2:B4 fill using E2:G2 (group list which is Animal, transportation and fruit) if one of the key word in E3:G5 found in A2:A4
A2: people like to eat apple
A3: car is very expensive
A4 : dog is human best friend
E2: Animal, F2 : transportation, G2: Fruit
E3:E5 = dog, cat, horse
F3:F5 = train, ship, car
G3:G5 = apple, banana, watermelon
result i want is :
B2 :Fruit,
B3 : transportation
and B4 is animal
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
I have date in column D and have a formula of
View 5 Replies View Relatedvoice Example.xls
My situation is as follows: I have multiple workbooks that each contain three worksheets, the worksheets from one or more of these workbooks needs to be added to another workbook.
Since the worksheet names in all workbooks are the same, I need to add the data from a cell (account number) in the file to the existing worksheet names. Using the attached file as an example, the value of cell A8 on the DMC-UPS-Summary worksheet needs to be added to each worksheet name in this file.
I have created a spreadsheet which serves as a reporting portal - if you select a product from a drop down, the spreadsheet automatically updates with data regarding that specific product. I would like to give my worksheet the ability to select a new item from the dropdown (that part i can do) and then print each of these product reports (1 page each) and aggregate them into one large pdf.
View 2 Replies View RelatedI have a button setup with a macro to copy cells in a column and paste them into a row on another sheet. One of the values in the column needs to be checked in the other sheet before being added.
After the button with the macro is clicked
- If the value entered in column A (sheet 1) exists in column A (sheet 2) proceed with the rest of code.
- If the value entered in column A (sheet 1) does not exists in column A (sheet 2), Popup menu to enter details of value (just a menu with an input box and instructions), then the macro should enter the details of value (entered by user into the popup menu) in column B of sheet 3, then proceed with the rest of code.
I posted this with a different explanation before and didn't get a response so I am hoping that this is a thinned down version of my request and is more specific. Please let me know if you need more info.
I was trying to use Sheet1 (data input sheet) to collect 33 values and write them to Sheet2 as a row. I wanted the user to be able to make changes/corrections. So if the set of data with same date and shift number is entered for a second time, my macro should be able to over-write the existing row in Sheet2. Have been digging for days yet with no avail.
I'm using Win XP pro and Excel 2003.
how can i automatically add one day to an existing day..
a
1 Monday
in b1 what would be the formula for tuesday..
=a1+1
?
I would like to add Cells(18,3) also along with the below code which should increase its existing value with 1.
Sub newinv()
Range("C20").ClearContents
R = Sheets("Sheet2").Range("B65536").End(xlUp).Value + 1
Cells(15, 4) = R
End Sub
Jane.
I have an existing module that queries a SQL database and populates a worksheet using VBA. I would like to add to this module to include a sum of columns, but as this sheet is always dynamic, i am not sure how to sum this appropriately. for example, I have column B, I would like to add the rows from a certain point in the worksheet, but this is always dynamic, is there a way to accomodate for this so that I am always summing the column in the correct place?
View 2 Replies View RelatedI'm creating a blank woorkbook that I'm gonna use for different projects. The other day I've got a solution in this forum for a problem creating the link to a non existing sheet and it works perfectly BUT now I need even more. I have to use formula VLOOKUP in the same cell where I have my IFERROR formula and I can't figure out
More precisely, sheet 'Graphique 2' columns D, F, H... are refferring to sheet 'LOT' F25:F44 (sheet LOT is a model sheet and I'm gonna have more than 50 of it, for different companies). To create some graph in function of date I've added months for the next 3 years in column B sheet Graphique 2, so the money amounts from column F sheet LOT (reffering dates are in column C) have to be copied to coresponding rows in sheet Graphique 2
Normally I think I would have to write:
=VLOOKUP(B4,LOT!C25:F44,4,"")
except that I don't know the names of my future sheet so in the same cells where I should have the VLOOKUP formula I have:
=IFERROR(INDIRECT(C$2&"!f25"),0)
My question is what is the combination of this two formulas?
Is there any way to automatically add two new rows after every existing row containing data?
For example
1 A B C
2 D E F
3 G H I
turn into
1 A B C
(empty row)
(empty row)
2 D E F
(empty row)
(empty row)
3 G H I