I'm new to the forum - I've done a search but cannot find the answer to my problem.
I work in a hospital and have a list of consultants who refer for a particular type of scan over a period of time. Each time the consultant refers their name is added to a list so I get a list like this: Dr Smith Dr Smith Dr Jones Dr Smith Dr Paeker Dr Paeker Dr Jones etc...
I have a table of data, from which I have created lists for “items created within a period” (the items are paintings on canvasses).
Each list displays which canvasses were completed within 2 dates.
My main data table is large (over 1000 lines and growing) and I need to extract the total quantity of each canvas size that appears in each period list.
My sample attached shows sample data, with corresponding lists of canvasses created within each time period, together with the result I am looking for (shown in red).
is there a formula that gives a true or false statement upon searching a list (ie A2:A6) and finding multiple entries? like, when i search A2:A6 and there are two fields that contain the word "hello", is there a function to say "true, there are multiple entries of the word 'hello'"
I have a sheet with a top to bottom date/chronological list of Horse races arranged so;
Column 1 Column 2 Column3 Column4 Date/Time Race type Empty Horse Name
e.g
01/03/2008 12:30:00 1m stks Mad Robber 01/03/2008 12:30:00 1m stks Don't Run 01/03/2008 12:30:00 1m stks Laughing boy etc
Then next race
i'm looking for a Macro that will add up the number of horses in each race and enter the number for a given race in Column 3 for each horse in that race. So the example above would become;
I have a worksheet with an inventory of items in cells in column A. I need to count the number of items listed in the cells in column B. I have data in about 1500 rows. The items in the list in each cell are separated with a space. Please see small sample below. I would normally do Text-To-Columns, but some of the cells contain up to 30 items.
I need to count the unique for a customer. The areas to be counted are separated by blank lines. At present, I am using sumproduct(1/countif(range1,range1), to count the unique items. This formula works perfectly except that it takes me almost an hour to do this for all the measurements. Is there a macro that can provide me with the same results -- putting the same values where I am presently have the formulas (the cells that before the blank lines)?
In Excel 2007, I need to be able to return a value (definition of something) based on what is selected in 2 other cells.
(See Attached) If in cell C2 I select "competency 1" and in Cell C3 I select "Expert", I need to be able to return the definition for someone that is an Expert in Competency 1 in cell D2.
Then, if in cell C5 I select "competency 2" and in Cell C6 I select "Leading", I need to be able to return the definition for someone that is Leading in Competency 2 in cell D5. And I'll be doing this about 10 times on each sheet.
All the tables with info are in another worksheet. I can do a vlookup if I'm just using one thing to match, but how do I match 2 things to return the definition?
It is a product list of office stationary with codes, descriptions and quantities. Using this spreadsheet we input into the quantity how many we want of the item, all well and simple you could call the list a stationary order form.
What I would like to be able to do with this Giant list is to have a function that would extract items off the list into a cleaner consolidated form. As in, if I wanted to order some of item A, C and F, I would like for the second table to just Show ACF without every letter in between or blank cells.
I know a simple method would be to have an IF formula to return the information to a new sheet that I could simply remove blank cell rows (unordered items) and ready for print each time. But I would love to know if there is a better way this could be achieved.
I have basic/intermediate knowledge of excel and can setup the data if need be in order for the function to work, but I can't seem to find the correct function for this project.
It's a quarterly schedule for utility meter readers, divided up into days across the top, and routes/areas down the side. There's a space with each route for the employee ID to go, depending on who's doing it.
Down the bottom of the sheet, there's a few empty lines for all the available employees who haven't been allocated to a route.
On the second sheet labelled EMP LIST, is all the employee IDs. It's also got the areas they work- it's for something I want to implement later.
I can put all the employees into a single column list, then use basic DV to give a dropdown menu by each route, to assign an employee to it. This is pretty straight forward. I've also been playing with this in combination with a countif, so that employees already assigned do not appear in the list.
This is about as far as I've managed to get with it.
I need to get the employees who aren't assigned to anything to appear in a list below the routes. I'm fairly sure this is just another countif, but I'm not 100% on the exact formulas.
I also need the list in the dropdown menu to reset for each day of the quarter, i.e. if I assign an employee to a route on the 30th day of the quarter, their ID will disappear from the list for any other route for that day, but will still be there for the other days of the quarter.
So far the only way I've managed to do this is by duplicating the employee list for every day of the quarter, which is going to get very cluttered, and also makes staffing changes difficult. I'm hoping there's an easier way to do this using one data set.
I've added an example of the sheet. It's one week and it's only got about 1/3 of the routes we would actually have on any given day.
I found code online that I can put on my sheet to get my formatting properties to stay the same for the items in my dropdown list located on another page. However the code does not work for conditional formatted cells...which is what I need. This is the code that I have that will carry over regular formatted cells. Just not Conditional formatted cells.
I have Workbook A populated with skus from a report and I want to remove all rows in this workbook that do not have a matching sku in Workbook B. Each workbook contains only one sheet and the skus are in column 1 of both workbooks.
Also, I am looking for a good resource/tutorial for working with workbooks, worksheets and ranges within. I don't anticipate this being the last time I will be confronted with this and would like to learn more.
I am wanting to create a list where I can select multiple items within that list and then print only those selected items. I have created something similar thru data validation, but I can't get it to print.
In addition, I would like to be able to subdivide the list into multiple categories, then select items from these multiple categories and print them.
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
I know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
I have two spreadsheets that use a Number as a Key. I need to compare the numbers on list 1 to the numbers on list 2 and add any values that exist on list 1 but not on list 2 to the end of list 2. List 1 is in Column B, List 2 in in column C of a different sheet in the same workbook.
The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant Dim row As Range Dim elements() As String
I am attempting to use a named range as my Validation data source but have two questions:
1) It seems when you use a named range as a source the user can enter in any data they want in that cell. I really only want the user restricted to the list I give them. If I enter the list manually in the source box then it works but I really want to use a named range
2) My range is fixed to 10 cells and the user can enter in as many variables as they want (up to ten). When a user clicks on one of the cells that the validation is set to read the range the user has to always scroll to get to the top. When selecting the cell Ecel always defaults to the bottom choice in the list. I want to minimize the VBA because Mac users will be using this and VBA seems to be touchy with macs.
I have a problem with finding the value in column B that is found within a range eg: <=1 & >=5 and return the corresponding values found in column A. kindly refer to the attached sample for reference.
I am working for a non profit humanitarian org and I am trying to modify an excel 2003 spreadsheet to change the formatting (color) in one cell based on the value of another cell. Obviously this is easy with conditional formatting, except that I have a list of around 25 unique values and formats.
Could anyone point me in the direction of some code that can do this? I am a relative novice to Excel when it comes to VBA and scripting things.