I have a list of numbers with 2, 3, and 4 digits. Is there a formula that can recognize if there are only 2 digits, it will add 2 zeros in front of the number.
For example,
47 will become 0047
234 will become 0234
1234 will become 1234
I have a worksheet to keep track of products. I use an SKU column with a Unique Number to keep track of those items on the shelves.
When I started my project I never imagined that my database would grow as large as it has. I started my SKU numbers with 80000, never suspecting that I would get to 90000. I am now at 125700. Many items have been removed / sold so it only encompases only 15500 rows.
On the site that I sell these Items, the SKU's when displayed start with 100000 and go to 125700 where 80000 is next and goes to 99999? ( or the reverse depending on which tab I choose ) Not sure why this is but there is nothing I can do to change the way they do it so I must find a way to change my system. With all the 80000 - 99999 items numbered - changing them to 6 digit 125700+ numbers would be a huge undertaking so I would like to add a 0 in front of each 5 digit Number in my SKU Column. That way my items will show 080000- 125700 instead of starting in the middle.
I do keep the column my ascending order so it is currently formated as a Number. I do at times copy an paste or pull ranges items by SKU numbers to mark down or modify.
When I place a 0 manually in front of 80000- it disappears when I move from the Cell.
If I change it to a TEXT cell- it stays in place.
Excel help doesnt answer my dilemma-- nor does my book.
I see there are masks etc -- or is just text OK ? (as I stated - I do use an numbered order or range to identify groups of items at times )- if text is OK, what is the best way to add a 0 to the start of each 5 digit number other than individually ?
There are Gaps in my sequence so I cannot just replace the first cell with 080000 and pull down.
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
i need to format my numbers in the following format
10,00,000.00
the first three digits will be separated and then subsequently 2 digits
I have a scatter chart that is populated from the values on a worksheet. The series formula looks like this:
=SERIES(,{2.36655521392822,2.54071712493896,2.70576763153076,2.8779809474945,3.04913735389709,3.2250 7190704345,.........},{5,5.09999990463256,5.19999980926513,5.30000019073486,5.39923381805419,5.5,5.5 995168685913,5.69999980926513,........},1)
I really don't need all of those extra digits, at most 2 significant digits is all I need. I wrote a piece of code that looks like this to shorten each number but it is not working. The code runs and in the watch window I can see that each digit is indeed being trimmed and converted back to a number (vs. a string) but the chart series formula still carries all of those extra digits. What am I doing wrong here. The code I wrote is below.
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
What type of formula do I need that will convert the following into one sum?
in Cell A1 : 34-23
I need a formula that will add 34+23 into another cell... this should be simple, but I've never had to write one for this before...
I have a question, how do i display a number 0 in front of another number? Example, I am working with these zipcodes and there is a 000213 but it only shows up as 213 in the cell. Is there a way for it to be 000213 with out me using the tilde sign `000213?
View 4 Replies View RelatedI am triying to write a formula adding two digit in the same cell and return the sum as a single digit as shown below. but not sure how to go about doing it. would appreciate any kind souls to help out.
C5 D5 E5 F5H5I5J5K529121958 D8 F8 H8 J8 2 3 1 4Let's say if 2+9 = 11, than I wan to break 11 into 1+1 = 2, how can I get it done?examplecell D8 is the sum of cell C5 and D5 which is 2+9 = 11. than 11 is further break down into 1+1 = 2cell F8 is the sum of cell E5 and F5 which is 1+2 = 3.Likewise for cell H8 is the sum of cell H5 and I5 which is 1+9 = 10. than 10 is further break down into 1+ 0 =1cell J8 is the sum of cell J5 and K5 which is 5+8 = 13, than 13 is futher break down into 1+ 3 = 4.
reading a zero number in a cell
here an example :
on Cell A1 = 01
on Cell B2 = 10
so I write at C1 the formula is =left(A1,1) but how come the number that comes out is 1 not 0 (zero) ?
but if I write at D1 the formula is = right(A1,1) the number comes out is 0 (zero)
how to make the formula that can read the zero in Cell C1?
Need a function that would insert a letter or a number in front of numbers in a cell for example
column A
3245
I want to insert the prefix "S" in front of the nummbers 3245. so i would hopefully end up with
Column A
S3245
I need to add an extra four zeros to a number in a cell - in this case an ID number, so that i can do a lookup from another list. Basically what i have is two lists of ID numbers in a field of a database, in one i have the correct display/format, so that a number would look like 000054454545. In the second list however the number is only shown as 54454545, due to differences in the programs which imported them. I would like to know if its possible to use a function or macro in excel to basically insert the four zeros onto the number ie 0000 + 54454545 = 000054454545 so that i can do a lookup of one for the other.
View 4 Replies View RelatedI wrote an excel program in Excel'03 for a dental office to manage state assistance patients and one of the table columns is the state assistance number. The problem is that the program defaults to a number format when it is entered instead of a text format, which is what I want. The issue is that state assistance numbers are always 8 digits and when it defaults to a number field the program drops the required preceeding zeros.
For example the number 00123456 will sometimes show up as 123456, which is wrong. It's like sometimes it will show up right and other times it gets a butterfly in its brain and deletes those zeros irritating the receptionist here. So, how do I get the table to either stay in text format or set up a number format that keeps the preceeding zeros?
I have a number, eg, 1234567 and rounded to prepare the shrink of the size of the number like
= Round(a1, -3). I have, say now, 1234000.
I need to strip "000" from the number and place 1234 to a cell.
I need to know how to remove characters from the date field in Excel.
Example:
9/12/1975 - I need it to read 09121975.
I also need to know how to remove characters from a social security number without removing the zero's in the front.
Example:
012-34-5678 - I need 012345678.
I have the following code which puts a series onto a chart
With Charts("Test Chart")
.SetSourceData Source:=Sheets("Data").Range("A1:B" & Nreadings), PlotBy:=xlColumns
.Axes(xlCategory).MinimumScale = 1
.Axes(xlCategory).MaximumScale = Nteeth
.Axes(xlValue).MinimumScale = Miny
.Axes(xlValue).MaximumScale = Maxy
End With
I would like to add a 2nd or third series onto the same chart using the same scale etc. How do I do this in VBA code? Whenever I add another line to add a series it just overwrites the first series I have shown here.
I want to use 4 toggle buttons to be able to add and remove 4 different series to a chart. When the toggle button is clicked, a specific series is added to a chart, and when it is unclicked then the series would be removed.
The problem I am running into is that unless I add and remove each series in a specific order, I will get an error because I may be trying to remove a series whose series number is not on the series collection in the chart.
for example: if I remove series number 2 with the toggle button for that specific series, then the toggle button for series number 3 will remove the old series 4 (which is now 3), and the toggle button for series 4 won't work because series 4 will now have become series 3.
Therefore, would there be a way to remove a series based on the name of the series, rather than the series collection number?
How to make fill series number with simple excel formula, like table below :
col.a (desired result)
col.b
1.
john
2.
lia
3.
leo margarette
4.
david lee
etc....
note : not use Vba...
I have a worksheet where I am collecting data and a seperat Chart. The first part of this code which adds a new row in my table works perfectly fine, but the latter part (based on a macro recording) does not. I need to specify the relevant row for the new series in the bubble chart. The colums are of course the same.
Private Sub CommandButton1_Click()
Dim LastRow, LastRef As Long
'Works!
ThisWorkbook.Worksheets("Projektradar - input").Select
Range("Q3").Activate
LastRef = ActiveCell.Value
Range("Q3").Value = LastRef + 1
I'm trying to create a spreadsheet for irrigation system program times. Each program has a start time, say 2 a.m. Multiple zones then run for varying times in a cycle. I need to add the run time to the start time to produce the next start time, and continue that through many zones. I can get the first few by simply formatting the cells as ##:## and using =F2+G2 (the start time is in F and the run time is in G) using 20 minute run time as a test. But when it gets to the third zone, my results show 2:60 a.m. and all results are incorrect from there on. Is there any way to do what I need in Excel?
View 2 Replies View RelatedI'm doing a study of when people are most productful in their day. I just need to count how many units a person made within say 4 hours of starting work.
My data is similar to the excel I've attached
Count completes.xlsx
I'm using Excel 2010 too.
Can a vba macro be provided for splitting a number into digits? The number will be in Sheet 1 but splitted number will be on sheet 2. Splitting of numbers means a number entered into a cell will be splitted into different column/cells with one digit per cell.
View 14 Replies View RelatedI work in a finance department and we have MANY numbers consisting of 7 digits. Is there a way to enter in the entire number, but only display the first 4 digits?
View 9 Replies View RelatedI want to extract the fifth and sixth digits from an 8 figure number i.e. 20010891 would equal 10.
I have tried every combination of Left & Right combined with Find that I know and nothing works.
In my worksheet there is a column with values of either 3 or 4 numbers. If the value only has 3 numbers I would like to add a space before the first number, to ensure the proper line-up when saving the sheet as a text file. How can I do this (conditional formatting or macro??)
View 5 Replies View RelatedI need a formula to extract the first two numbers and move them to the back of the number remaining. For example, the original number is 235871, the result would be 587123.
My numbers always have six digits but may at times have seven.
Im having a hard time creating the formula to calculate the min number of employees to complete a number of jobs that come in each day and need to be finished in 18 days or less.
Data that I have:
Forecast of the number of jobs for 251 days ( jobs range from 10 -80 per day) Each job needs to be finished in 18 days or less we need to staff a fixed number of employees for the whole year each employee can complete 4 jobs per day no weekends
i have excel 2010 and crystal ball
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View RelatedDoes anybody know of a special format or a rounding function that displays or rounds a number off to a specific number of significant digits.
Lets say I would like 3 significant digits this would be the results:
0.40019 -> 0.400
6.543 -> 6.54
12.543 -> 12.5
32 -> 32.0
564.7894 -> 565
54387 -> 54400 (or 5.44E+4 to be correct, but i can live with 54400)
I need to calculate the sum of digits in a numeric string. The function should keep on adding the digits of each result, till the final sum is a single digit. Please refer to the following example and result expected:-
Supposed the number entered in Cell A1 is 456789
Result 1 = 4+5+6+7+8+9 = 39
Result 2 = 3+9 = 12
Final Result required = 1+2 = 3