Adding Columns For A Different Sheet And Getting Totals?
May 7, 2014
OK, I have a spreadsheet that has several pages for tracking when items are added and removed. On the main sheet I need to have the total items added, the total items subtracted, and the total avaialble. This is also based off of month.
For example, on sheet 2 it would show 5 of an item added, 2 of an item subtracted, all for March. It would also show 3 items added, 2 subtracted for April. On Sheet one i need to report in a row any items added, any subtracted, and the current total. I am pretty sure that i have the formula for added items and subtracted items for the given month, but i do not know how to get the current total.
I have a budget workbook consisting of numerous worksheets that are essentially checkbook registers. I would like to transfer the totals of each register to another worksheet where I can add up the totals. I'm asking how to transfer the ever-changing cell containing the register total to another cell on another worksheet.
how to write a formula or function to add up adjacent totals in column B that match the "name" in column A?
For example:
Mary's name is entered multiple times in column A and her earnings are recorded in column B adjacent to her name. How do I add up her totals only with a IF statement?
I need to SUM the cells in column J when column E has the word "yes" and the range N:R has a letter "w" in one of the columns. Only one of the N:R columns will have an entry on any one row and it may not necessarily be a "W".
I have Googled, and being a beginner I don't comprehend the result! Some people were talking about using an add in, but I won't be allowed to add software to our PC's.
I have a workbook that has 2 sheets; "Quote Summary" and "ECS". The "ECS" sheet contains columns "C" through "L" each of which has a total on row "27". At any time, one or several (but never All) of these columns may be unused and therefore hidden.
I would like to know if it is possible to sum the total of only those columns that are NOT hidden and display that value in cel "C15" of the "Quote_Summary" sheet.
Note that the "Fruit" and "Fruit Totals" column letter position will always be different every time I run the macro, so I would like the macro to find these columns by name rather than by column letter.
I'd like a macro that adds the total number of fruits in the "Fruit" column by looking doing 2 things...
1. Add the total number of "Fruits" in the "Fruit" column, find the bottom-most row of data in the "Fruit" column, go down 2 rows, and create the text named "Fruits Total"
2. In the cell directly to the right of "Fruits Total" put the value of the total number of fruits in this cell (which will be in the "Fruit Totals" column)
3. Add the total number of "Apples" in the "Fruit" column, find the bottom-most row of data in the "Fruit" column, go down 2 rows, and create the text named "Apples Total"
4. In the cell directly to the right of "Apples Total" put the value of the total number of apples in this cell (which will also be in the "Fruit Totals" column)
A B C D Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party 3/22/2012 0:00Thursday 12:00 P.M. 2 3/22/2012 0:00Thursday 12:00 P.M. 4 3/22/2012 0:00Thursday 12:00 P.M. 1 3/22/2012 0:00Thursday Not Requested 2 3/22/2012 0:00Thursday 12:00 P.M. 3 3/22/2012 0:00Thursday 12:00 P.M. 3 3/22/2012 0:00Thursday 12:00 P.M. 4 3/22/2012 0:00Thursday Not Requested 1 3/22/2012 0:00Thursday 12:00 P.M. 2 3/23/2012 0:00Friday Not Requested 2 3/23/2012 0:00Friday Not Requested 5
What I'd like to be able to do is if Column A,B, and C are the same to sum column D. So, for example, I would like the data above to look like this:
A B C D Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party 3/22/2012 0:00Thursday 12:00 P.M. 7 3/22/2012 0:00Thursday Not Requested 3 3/22/2012 0:00Thursday 12:00 P.M. 12 3/23/2012 0:00Friday Not Requested 7
I've got a pretty large budget spreadsheet my department has used for about 5 years now. I want to add multiple totals for different accounts per sheet, however my problem is when I or someone else adds a row at the bottom(above the totals) it is not added into the calculation. I'm using simple formulas right now to total sums and also show remaing money in budget.
For example:
Cell F117 is the total amount spent "=SUM(F112:F116)" Cell G117 is my budget total, just a number Cell H117 is the difference "=SUM(G117-F117)"
I have a time sheet that I can figure the daily OT and DT on, but how to calc the the Bi-Weekly totals.
I can only have 80 hours per week, the rest needs to be carried to the OT field, but I can only have 40 of OT per week and the rest needs to be carried to the DT.
I have a spreadsheet with 13 sheets. Sheets 1-12 are Jan - DEC and I would like to make the 13th sheet a totals sheet Year to date.
The totals sheet will update when I populate/update the fields in sheets 1 -12.
The sheets have names in column A.
The sheets have labeled columns in Row 1.
What I am trying to accomplish is something like "if BOB in A:A on sheets 1 - 12, sum (or average) column B on the same row as BOB for sheets 1-12 and add to sheet 13.
I know this doesn't work, but this is my thinking =SUM(JAN:!H2:H200, FEB!H2:H200, etc.) if A2:A200 is "EAXACT MATCH" to sheet 13 A:A
I want to be able to sort/filter/hide on different sheets at different times without affecting the totals sheet. do I need to use subtotal?
I am a bit stuck with an excel spreadsheet I do for work and would like to ask your advise, I will try to explain as best as I can. I am running a small store that feeds 13 buildings.
On the spreadsheet there are 13 sheets, one for each building. The items will go out monthly.
What I need to do is record the total items from each sheet in a column called All Totals on the first sheet, this will add up the totals for all the buildings.
If I put an attachment that may help out a bit. If you can look at P3 it is all the P3s to add together, next down will be total of P4,P5,P6.
I am using Excel 2010 and need to get the totals for each month transfered to a separate sheet. For example;
One sheet is called Outgoings (which has all the receipts entered chronologically in rows and apportioned in the columns) and the other sheet tracks the cost per month of each column.
I have a spread sheet for my checking accounts. There are 3 sheets, BW, QW, and Chase CC. In the 1st 2 sheets row D is named "Category" and the 3rd sheet has the same name but is in column C.
How to link the 3 sheets to a summary sheet keeping track and totals of the categories ?
Example in sheet BW I have a category called "Utilities" and the column to the right of that is the amount. Then ect for other categories.
In a sheet (4) I have a pivot refreshed by a VBA macro code. Since I have defined a Chart on this pivot, I need to copy this pivot in a new sheet to avoid to reduce rows using a filter of the Chart. I copy this pivot using this VBA code
Sheet4.Select Sheet4.Copy After:=Sheet2
I have e new sheet with a number Sheet(n) not equal to maximum sheet number +1
For a new run of the VBA macro I need to delete this sheet
Sheets(n).Select where (n) is not = maximum sheet number +1 ActiveWindow.SelectedSheets.Delete
Then I need to avoid the message box where I need to confirm to delete the sheet because the sheet is not empty.
Is there a solution to copy a pivot in a new sheet replacing the previous pivot and vithout changing the number of the sheet?
Using VBA... I have Column N (eFIUnitRebate) which I want to swap with Column M (FFUnitPcnt)
Now with Column M as eFIUnitRebate and N as FFUnitPcnt I want to create an extra column (adjUnitCost) where Column N is and push FFUnitPcnt to become column O, etc.
Here is how the whole process should work: Swap M and N Insert new Column in N Insert new Column in P Insert new Column in Q Insert new column in R
There is more information on the sheet after these columns so for all column inserts it needs to push whatever was there over.
So the layout is as follows: J K L M N O P Q R
Units UnitCost UnitRebate
[Code] .....
These columns are thousands long, so I would like the formulas for them to be applied to the whole column as well.
I wish to have a column of values. It will be dates. There will be a value in each cell (hours worked by employee) I want to know only the total hours for the last 30 calendar days. I still need to see previous values, but I just want to total the last 30
What's the fastest way to display the sum of each column in one row. Here's a picture of what I want to do: http://www.filefreak.com/ppublic/33833/excel%20help.bmp now I want the sum of each column to be displayed in for example row 10. I have tried manually clicking "autosum" (sp?) but that will take a lot of time as I have about 400 more of these.
I would now like to as remove the first column and add another column a and b. A would say "Service From Date" and column B would say "Service To Date" In addition I would like to add a column between "5202 Meals Provided" and "5221 S.A. Facility Lodging" a column that reads "7025 Number of Days Care" and that tallies like the rest of them.
I am new to the Macro editing of Excel. I have a list in the first tab that I would like to click yes or no (how to set up a checkbox) and the appropriate column will pop up in the next tab with appropriate header. I would like it to be where the column will pop up in the correct order, so even if one is clicked in the middle, it knows where to put it.
I d like to ask for a vba code that adds two columns starting from d5 and e5 for several worksheets called multi1,multi2,multi3,........The d column contains only numbers, the e column contains number and letters (product descriptions)
I have a data worksheet, which contains about 20,000 lines of journal entry info. There is a separate column for debit and credit, not one "amount" column. On another worksheet, I am aggregating the data to review the impact for this series of journal entries over a time period (12 months). Thus, my pivottable contains "Accounts" in the "ROW" and "Period" in the "COLUMN" sections of the PivotTable Layout. The "Debit" and "Credit" fields are then summed in the "DATA" portion of the PivotTable.
My issue revolves around getting the actual impact for each account for each time period. Essentially, I need an extra column inserted between each time period that sums the debits and credits for that period. Do I need a macro for this (not any experience with macros)? My file is way to big to share, so let me know if a pared-down sample would work.
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
I am trying to write the code for adding double speechmarks for the number of columns on my spreadsheet with a column heading Notes. There are about 10 columns out of 30, and all of them need double speachmarks.
My manual process was to insert a new column in from of the 'Notes' column, use the concatenate function for example - =concatenate("""",A2,"""") and copy the function down the column. The I was geting rid of the formula by copypaste special values, transfering to my original 'Notes' column and at the end deleting the new column that I added at the beginning.
Is there a quick code to populate a concatenate formula via VB? If not, what code can I use to replicate my manual process via VB. On the quick note, the spreadshee has always the same number and order of columns, but number of rown is defferent each time.
I have 5 coloums in which the last three have numeric values. The first two coloums have name and country code. Now, The first two coloums have duplicate values but the rest of the corresponding columns have different numeriv values. What I want now is to add the numeric values of the coloumns of the duplicate data and want to display in the first row. For ex there are A = name , B= Country , C D and E contains different numeric values. A and B have dupilcate data but different C, D and E values. Now I want to add up the numeric values of the dupilcate data and get it displayed in a new coloum in the first row of the duplicate data set.
