I am trying to record the date with time on a pre set cell of a row, in which the cell will show the most current updated date/time once any change is made within the same row, regardless which cell on the row. Is there any code for VBA you can suggest?
View 14 RepliesI have a spreadsheet which is linked to several password protected spreadsheets. I have a macro which updates the links but I would like the macro to include the date that the links were last updated. Is there a code I can insert into the macro which will display the date the links were last updated?
View 4 Replies View Related I am having rows of data, that i will be updating from time to time. I want excel to move the latest updated rows, in any column if updated, to move to the top, to easiy know that i updated those records. It should be that when i updated more rows than one, then the first updated cell would be in lower, in order, than the latest updated cells. I do not want any cumbersome vba. I want in formula or in conditional formatting. The row no may be total not limited to some rows.
Because, you naturally would have updated the 200 th record and would have saved. It saved as it is, so when you next opens it it is there, but how can i know that that is the last row of data i edited.
I want to add hours to a date-time cell to get result in date-time.
Format of cell A1 is d/m/yy h:mm AM/PM
Format of cell A2 is General
Format of cell A3 is d/m/yy h:mm AM/PM
I want to add A2 (number of hours) to A1 to give A3.
The formula I used is A3=A1+Time(A2,0,0)
The formula works perfectly fine when A2 is less than 24, but when A2 is more than 24, the date doesn't get changed.
I need a formula to add just the time to ' date and time', ignoring weekends.
eg:
Fri 24-Aug-07 10:52 is the date and time
28:48:00 is the time
If I add the time to 'date and time', result is coming as Sat 25-Aug-07 15:40
But it should come as Mon 27-Aug-07 15:40 (hence ignoring weekend)
From an outside source, a date is brought into one cell, and time is brought into another. Is there a way to combine them into one cell with the format of m/d/yyyy h:mm?
I tried concatenate, but that did not work.
I've tried a number of examples but I can't seem to get it to work. the desired results in column C.
10/17/11 12:00 PM10/17/11 1:00 PM1:0010/17/11 12:00 PM10/17/11 9:00 AM(3:00)10/17/11 12:00 PM10/16/11 9:00 AM(27:00)
I have a problem concatenating time in excel if it is of Date + Time format..
What formula do I use to just add the time by, say, 3 hours? I'll need to use, say cell B2, which will add 3 hours to it.. What formula do I use?
See the attachment. When the macro runs. The workbook is saved in a folder with a new serial number. That is fine but I need to debugging the code. Since I need to save the WB name with the time and date to be also picked and named when saving. Refer to cell B1.
View 9 Replies View RelatedI have a data of complaints where I need to present it to the Management in such a way that the SLA period of 8 hours does not pass. Our office working hours are 7 AM till 7 PM. The complaint received should be escalated to concern section within 8 Hours of SLA time. I have the list of dates with received time. The complaint which could not be escalated today would be escalated next day. In this case is should deduct 12 Hours (7 PM to 7 AM, Non-working hours) from the time. How can I insert escalation date so as that it would deduct non working hours from it.
View 5 Replies View RelatedI've been reading up on Excel's date and time functions and can't really figure out the best way of doing this.
I have a total amount of time that a machine should take to finish a task. I'd like to enter a date and time into a cell (Start Date) and have another cell return the date and time that the machine should be done with the task excluding weekends, and holidays (End Date). This would be based on a certain number of "working hours" (hours in the workday minus break periods) that would be calculated in another cell.
I have some cells which must be in the format 15/06/2007 15:25
I then need to add either days, months or years onto it.
Say the above date/time is in cell A1, when I do =YEAR(A1)+5 it displays 2012 if I choose the general cell format, but when I select the same cell format (date time) it comes out as 04/07/1905 00:00
I have a front page with buttons linking to other spreadsheets, e.g
{ button } Stock Sheet .xls (???)
{ button } Sales Sheet .xls (???)
In the brackets I wanted to display the last updated date of the said spreadsheets, so that a user can see if it has already been updated. Is there a way of retrieving the last updated date for a spreadsheet, and dispaying it (i.e is it held against a variable or named item)
I have an excel report that is generated in another program every week. The report is not sorted by date and it may have 100 rows of data one week and 200 rows of data another week. My excel file has formulas that refer to this original report. I need those formulas to update first, then I need the information to automatically sort by date (column D in my excel file). I have tried to setup a script to run, but it's not working. I will attach the file and the script.
Attached File: Sample w VBA.xls
I want Cell B1 to display the MM/DD/YYYY of when Cell A1 was updated.
so when I update A1, B1 is automatically updated with today's date.
Is this possible?
Previous to a PC meltdown a few months ago, when I opened my monthly customer list file the account date would automatically update to the current date. After the PC repair, reinstall of MS Office 2002 (same version as before the PC death) and copying of documents back to their old locations, I now have to update this manually for all accounts each time I open it. I have searched through the options and customize menus but there is no mention of this setting. Before, it just did it from day one (5 years ago) without any setup.
How do I get back the old auto-date update preference?
I have a column of times: e.g. 10:03:00 and I would like to add them all up.
=A1+A2 works fine.
=sum(A1:A10) does not.
I have created a spreadsheet and saved it as a template. when the staff open it to enter information they use save as and give it a name. They only need open and enter information once. I have put into this spreadsheet in cell A1 a formula to enter the days date. This all works fine. A few days later I need to access the spreadsheet to check the figures entered and obviously the date changes to the date when I open it up. Is there any way of stopping this happening without using macros. i.e. keep the date as the day they entered the information.
View 9 Replies View RelatedI am trying to add some functionality to a spreadsheet that I manage. Basically i have a small team, and each week I ask them to update a spreadsheet to show what they have been working on in that week. In order to monitor who is going in and updating their entry I would like to add a column that shows me when the last update was for each team member. I have seen this example but it only returns a date based on one cell as opposed to the whole row (or range of cells)
Auto populate the date and time a cell was updated. I have attached an example.
I have two tabs in a workbook named "Dashboard and Medicine details"
I need my dashboard to show what are the medicines will expiry in next month.
My Medicine details tab contails medicine details along with its expiry date. If the expiry date of a medicine falls in next month, then it should be displayed in my dashboard.
See the sample attached will give you a clear objective.
Tablet sample.xlsx
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I am replicating a Matlab program which calculates tide levels at different times of day. I need to replicate it in excel to speed up data analysis and I am nearly there.
what happens is I need to apply a time offset to the time of high tide at port a based on the time of day, so if it is:
between 00:00 and 06:00 the high tide at port b is 81.6 minutes after the peak at port a
between 06:00 and 12:00 the high tide at port b is 74.56 minutes after the peak at port a
between 12:00 and 18:00 the high tide at port b is 81.75 minutes after the peak at port a
between 06:00 and 12:00 the high tide at port b is 79minutes after the peak at port a
I tried this formula, where CO2 has the time/date of the high tide at port a:
=IF(CO2<0.75,IF(CO2<0.5,IF(CO2<0.25,CL2+(81.6/(24*60)),CL2+(74.56/24*60)),CL2+(81.75/(24*60))),CL2+(79/(24*60)))
The problem is the high tide on 07/01/2005 07:45 is read as 38359.32 rather than 0.32 - is there any easy way to tell excel I'm only interested in the time not the date? I have this spreadsheet setup now to do all the other bits required and i is just the timing that is a problem.
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedI have a started time of say 8am from cell B3. I want to know what time it will be when I add a full number (hours) from another cell. For example A3+B4 where A3 is 8:00 A.M. and B4 is 4.04. I'm looking to get the a result of 12:04 P.M.
View 4 Replies View RelatedI am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedI'm trying to write a VBA code for converting the date/time as text to a date/time value.
The scenario is, I have three different types of text :
ddmmmyy
HH:MM
ddmmmyy:HHMM
I could have the code working fine with the first two types, but not the last one.