I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I have a worksheet with about 20 columns of info. First of which is a primary key. Call it "Job Number." I would like to create a macro that runs down the list of primary keys searching for a specific Job Number I ask for in the new worksheet, in A1. It then copies and pastes the entire row where it found that job number into the new worksheet starting at row 6.
View 7 Replies View RelatedI have a worksheet (will be the last worksheet) that I want to use as a template for further worksheets.
I want the user to be able to run a macro (?) and copy the entire worksheet and then insert it to the right of all the worksheets as many times as needed.
I've a worksheet where I maintain the IT tickets that I handle. Whenever, the I column is updated with Implemented/Closed, the entire row should be copied to a new worksheet.
I've tried with other VBA scripts provided, but was not success with the same.
So I have an option on my userform that the user input selected.
I need the data once written to the worksheet [Master] to move based on cell AD [Customer Divert / TBP Divert / Failed Delivery]
Example: Row 12 has Customer Divert in cell AD I need to keep a copy on the master sheet but also copy the entire row to the customer divert sheet.
Need code and here to input in the Code sheet?
I want to run a macro that looks thru column F of all my worksheets (in my entire workbook).
If it finds an x then I want it to copy that entire row and paste it into a worksheet called "old" or a new worksheet or a new document in word (it doesn't matter - just whatever is easiest for my little brain to understand).
I should end up with about 40 rows of data in the new sheet.
(I have some code that looks thru it all and colors the cell blue but I just don't know how to get it to copy and paste the entire row into a new worksheet.)
I'm trying to develop code that will perform the function in the title. I want to use an if statement that looks at cells across the worksheet and where it finds certain text it should colour the entire row. I would also like to be able to input the text via a user box. I don't necessarily want the code
View 3 Replies View Relatedway to copy the entire row of data from one worksheet into another, within the same workbook, based on the criteria "Responsible." Here is a sample of the data: ..
View 9 Replies View RelatedI need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.
Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?
I need to make several exact duplicates of an existing worksheet which includes several form controls. Basic Copy/ Paste the worksheet works well but row heights are different and hidden rows are unhidden. Is there a way to make an EXACT duplicate ?
View 2 Replies View RelatedI have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx‎
I'm looking to identify a keyword in a string and then replace that string with just the keyword.
The string is a product description. The keyword is a product group. The keyword can showup in any position in the string.
I can't post the actual data do to confidentiality requirements. but here's an example.
description
qty
price
keywords
code
green grapes bunch
1
2.5
[Code] .......
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
1. Find a text "State" in column 5 of a active sheet and copy that particular row to a new worksheet "Summary" including the header row.
2. Loop through other worksheets and add results to "Summary worksheet" without the header row.
I copy information from one worksheet to another. Now i specify the range to copy in the macro. What i need is for the macro to find the end (last row) of data and than copy everything from row 5 to last row.
The below is a macro i currently use:
Sub Import_FNGC()
Const TARGET_FILENAME = "2008.xls"
'
' import_FNGC Macro
' Macro recorded 1/30/2008 by wwrobel
'
'
myMSG = "This will clear the data and import information. Do you want to continue?"
Response = MsgBox(myMSG, vbExclamation + vbYesNo, myTitle)
Select Case Response
Case Is = vbYes
Range("A5:BM100").Select............
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I would simply like a Macro to 'find' or search keyword data in a spreadsheet and copy the chosen rows and past them into a new excel sheet. I want to be able to do that as many time as I need, currently I have the following code, it does not seem to work well for me, I can only use it to search one time, cause an error after that
Sub FindIt()
Dim rngWB As Range, c As Range
Dim strFind As String, firstAddress As String
Dim wsCount As Integer, ws As Integer
Dim rw As Long
strFind = Application.InputBox("Type in the name you wish to find.", "FindIt", Type:=2)
Application. ScreenUpdating = False
Worksheets.Add(After:=Worksheets(Worksheets.Count)).Name = "Blank"
Sheets(1).Select...................................
how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
Worksheets("RoedForm").Select
Worksheets("RoedForm").Copy After:=Worksheets(iCount)
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.
The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.
How do I find out which courses have end < 2004. But do not also have an end date > 2004.
What I am trying to do is determine which courses are not longer being used since 2004.
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies View RelatedI would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies View RelatedWhat I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies View Related
