Im basicaly pulling a report wherein the details will have a column as number.
It basicaly should be a three digit number. The tool will have the information as below.
VNO005016017008019020021
But when im pulling out the report into excel, the zeros in the prefix goes away and the report looks like the below
VNO516178192021
I just checked the tools previllages and it seems that we cannot do anyting in pulling the data as it is in the tool.
So wht im trying to do is to save the report in a folder where i have placed a validation sheet which will have references of the parent report.
So when i open the report the reference will pull up the data and in here i would like to add a validation which will add "0" in the prefix if VNO is a 2 digit number or "00" if the VNO is a one digit number.
I have a large spreadsheet of employee data saved in a shared network folder so that others can access it. Starting about a week ago, anytime I enter a number in any cell, Excel adds two zeros to the end of the number. For instance, a 1 becomes 100.
When other users open the file on their computer and enter a number, everything is normal - no zeros are added. I'm guessing I inadvertantly enabled a function somewhere along the line, but have been unable to figure out how to undo the function.
I need to add a specific prefix (in this case DR- ) to a whole column. The problem is I have some cell that already have the prefix while others don't. I also have some cell with value N/A and I don't want them to get the prefix either
PHP Code:
___C___ DR-1220Â 1222 Â 1233H DR-1220Â 1222 Â 1233H [Code] ......
I need to extract (and then use for SumIfs) only item numbers from the long description. Please see the attached list where item number column shows existing list & next column shows what i want to extract. The exrtacted part if has any trailing or succeeding letters, characters between numbers should stay. for example from "SGA:RV-SVA:PEPPERS/PEPPERONCINI:SV9176001/232034" I need to extract " SV9176001/232034" or from " SPICES:BULK SPICES 7100:9054B" I need to extract " 7100:9054B". Can some one please urgently help me on this.
I have a huge column of data. This data has few prefixes that I need to remove. I have a list of possible prefixes. Some prefixes are 1,2,3 or 4 characters long. Could you please suggest best way of removing these prefixes (VBA if possible)?
Following are some of the examples of prefixes: AB GD KR BCD FP- TJ- W
I'm pasting data from an external source into Excel. The data is in hh:mm:ss format. However, when the source data has zero hours it only displays minutes and seconds preceded by a colon. For example, 5 cells of data in a column might look like this:
:29:28 :31:50 1:15:17 :05:47 1:19:36
I need to run simple calculations on these times, but the cells without an hours value paste into Excel as text format. What are some ways to add a zero before the colon in Excel?
I have 100s of urls with prefix as the left column. I need to rename them to the right column format. UDC 01_001 will take number Batch 01_385, UDC 01_002 will use Batch 01_386 and so on.
I cant figure out how to do this in one quick macro instead of replace function.
i have to copy and paste values from an sap program over to excel spreadsheets, and I usually do about 15 at a time that end up in a column: 15 different cells. The value I am copying are ID numbers that all begin with zero and excel automatically removes the zeros at the front of each number. Is there a formula/process for preventing this.
i have a header row that i want to transfer to a new spreadsheet. here is my exact setup to make it more clear:
Sheet1 - 001 PM Usage$% Sheet2 - 022 PM Usage$%
i have dozens of these rows, and i want to set up a auto rename for the header row on sheet 2 to rename itself like this:
Dim the value from header row on Sheet 1 (001), and rename the header on Sheet 2 (022), keeping the remaining contents intact (this is important because i want to use the same function for other headers which varies).
what i am doing now is dumping the value of the first cell into a variable, but as it stands it doesnt store 001, it stores 1... stripping the zeros, which makes it more complicated.
i thought perhaps i should dim the first 3 characters in the header as a string, and rename the first 3 characters in header 2, which i think would be the most efficient, but i dont even know if that is possible.
I have ID numbers that sometimes starts with one or more zeros and when i try to paste a string containing ID numbers that starts with a zero, excel converts it to a number thereby deleting the leading zero(s). Is there any way to force excel to keep the leading zero when i paste from the clipboard?
I have tried setting the format for a column as text using xlSheet.Columns("D").NumberFormat = "text" before pasting to try to force excel to keep the leading zero but the ID# comes out unreadable as "############". I have also tried formatting as "General" and custom formatting the column before pasting but have been unsuccessful thus far. I've seen other programs accomplish pasting numbers with leading zeros but how do you do this?
I have a column of numbers with one decimal point and some blank entries too. I need to convert all the numbers (including the zeros, but not the blanks) to two decimal points. Any idea on how this can be done?
Examples: 0.1 needs to become 0.10, 0 needs to stay 0, a Blank cell needs to remain Blank.
So if I have this data in a column you notice they have different length. Now I want my macro to add leading zeros until the length of all occurrences is 4.
I know for numbers you can do a range.numberformat = "0000".
But this won't work for B74 because (obviously) it will not be recognized as a number.
I know in a formula you can do it with the command TEXT. However I do not want to create extra columns I want something to alter it in place just like the numberformat does but then for numbers and text.
I am using Excel 07 with Vista, and creating a spreadsheet in which users will be inputting a record into every row.
There is a row that requires a number to be entered, where some of the numbers will begin with 0 or 00 or even 0000. I want to make sure no-one incorrectly enters a letter, however with data validation set to whole numbers, it formats the cell to change an entry of "005667" into just "5667". There is no set length for the field.
The only way to have "005667" is the change the column to text, but then obviously that defeats the whole purpose!
[URL] .... If you take a look at the picture, what I'm trying to do is add the list of Prices up so that I can differentiate the amount received in $ and in £.
I need to add up all the numbers that don't have a $ in front into the 1 cell, and all the ones with the $ in front into another cell.
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
with the data in the attached sheet, I create several different pivot tables that need show the count of the information in the columns M:DU. My issue is that the data is sent to me from a third party and the columns contain zeros that cause the counts to inflate.
What I would like to be able to do is run a macro that will search out any zeros in M:DU and replace them with a blank cell.
Unfortunately the number of rows increases with every monthly reporting cycle so the macro would need to be able to accommodate for that.
I’ve created a formula for this statistic and I’m happy with the results. Because I’m working with formulas, my only problem is the unwanted zeros. How do I hide zeros that show up automatically (i.e. #3 [blank] and Nov 09-June 10)? I can hide the numbers, but if I enter a zero to one of my future statistics it will not appear and I don’t want that to happen. Is there a way to hide those automatic zeros without affecting my real zeros?
I have a sheet that auto-populates with code from a userform that also provides the cell formatting. What I need is that in Column A it keeps a running count of the errors that are populated on the sheet.
Code for the formatting
With ActiveSheet lastrow = .Cells(.Rows.Count, "B").End(xlUp).Row
For i = 4 To lastrow
If Cells(i, "B").Value "" Then With .Cells(i, "A")
With .Offset(0, 0) .Value = "1" End With
.Offset(0, 1).Resize(1, 9).Borders.LineStyle = xlContinuous .Offset(0, 5).Resize(1, 3).Interior.ColorIndex = 35 End With End If Next i End With What I need is instead of Value of "1" with the offset(0, 0), I need it to take the previous rows value and Add 1.
So the Range("A4").Value = "1" Range("A5").Value = "2"
As the new errors are added to the sheet I need the value in "A" to be 1 more than the previous "A" value.
i've gotta do this thing for school and i was wondering if thier was any way i could add up numbers from random number thing eg.rand()... if that makes any sense ?
I attempting to develop a forumla to account for 50 locations I am responsible for that will add different numbers together based on a specific location.
For example, if the location says "Los Angeles", I need the formula to look for all instances of "Los Angeles", the quantity of items sold and add them up for me in one spot.
I want to know how I would write/format a spreadsheet that would tell me what are all the possible outcomes between the two numbers and what the components of these two numbers would be.
For example.
(8 * .32) + (3 * .33) = 3.55
So somewhere I would be able to see that in order to achieve 3.55 I need (8) .32 stamps and (3).33 stamps
