In Column A I have numbers ranging from 0 to 500, I want to consolidate these in column B or C to pull through all numbers >0.
I have a formula but its pulling through everything except for the blanks:
=IFERROR(INDEX($A$2:$A$1700,SMALL(IF(ISNUMBER($A$2:$A$700),ROW($A$1:$A$699),""),ROW(A8))),"")
how i can amend my formula or create a new one?
Column A contains numbers 0, 2, 0, 0, 5, 6, 0, 8 (in cells A1 - A8 respectively)
Can I write a formula to make column B contain only the non-zero numbers (2, 5, 6, 8 in cells B1 - B4 respectively)?
So quick sample of data :
B74
B74
9
94
1
948
B74
So if I have this data in a column you notice they have different length. Now I want my macro to add leading zeros until the length of all occurrences is 4.
I know for numbers you can do a range.numberformat = "0000".
But this won't work for B74 because (obviously) it will not be recognized as a number.
I know in a formula you can do it with the command TEXT. However I do not want to create extra columns I want something to alter it in place just like the numberformat does but then for numbers and text.
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
Would like to Condense Column Q to Col S no Blanks no Zero's
Tried formulas on net but won't work for me ? ?
I am attempting to consolidate multiple worksheets into one. The consolidation works fine on worksheets that have data however, as in my example file, there are worksheets which are presently blank (empty of data) - save for the header row.
The problem:
On consolidation, the header row from the "Empty" worksheet becomes a row in the "master" worksheet that is created. How can a worksheet without data be ignored on consolidation?
I'm working on creating a pie chart that draws data from a fair number of source cells. However, a good number of these cells = 0%. How can adjust the chart data range to ignore zeros.
Here is my chart data range:
='Jan-10'!$G$3:$G$18,'Jan-10'!$K$3:$K$18
Have values in column B. Need to INDEX column B and pull across the first value of column A that is not a zero e.g.
COLA.....COLB
000.......150
000.......150
056.......150
000.......150
000.......150
SO for all of these...150 would lookup the value 056 from column A
I am creating a graph but there are holes in the data (the info is not available)
where there are holes then the line graph is jumping down to zero, then back up to the next value.
this makes the graph look very weird and moreso - incorrect.
is there a way to make a break in the line graph no to account for the holes - not to show zeros.
I'd like to consolidate rows with same value in one column to return total value of all the rows in another column. I am not very good with VBA so I was hoping if there is an easy non-vba way to do this. I've attached spreadsheet sample.
View 2 Replies View RelatedI am using a lookup function to return nalues to a column. Some of the values returned are ### and I cannot SUM this column. I either need to adjust the lookup formula to not return ### or adjust the SUM function to ignore ###.
View 5 Replies View RelatedCode2
Code
Type1
Type2
Type3
Type4
00N100
0N400
10N100A
how this can be consolidated?
I have 2 columns, I need to consolidate one of the columns separated by a character.
For example, I need to turn this.........
Part# Part #2
1AMAC330221132609
1AMAC330222724908
1AMAC330222724977
1AMAC3303419188468
1AMAC33034F6ZZ-19C836A
1AMAC3305107-0442A
1AMAC330511911006
1AMAC3305119188473
1AMAC33051F0TZ-19C836-A
1AMAC33051FOTZ-19C836-C
into this..........
Part# Part #2
1AMAC330221132609*2724908*2724977
1AMAC3303419188468*F6ZZ-19C836A
1AMAC3305107-0442A*1911006*19188473*F0TZ-19C836-A*FOTZ-19C836-C
I have thousands and thousands of rows of data which look like the spreadsheet screen shot shown in this image:
ExcelConsolidateRaw.JPG
I want to consolidate them so that they look like the spreadsheet screen shot shown in this image:
ExcelConsolidateDesired.JPG
How to insert it into a module in the VBA editor.
I'm using Index/Match to find a value in another workbook, but there is one value that I want to ignore. For example here is my function --
=INDEX(ZZANALYSIS_PATTERN.xls!$A:$H,MATCH(D8,ZZANALYSIS_PATTERN.xls!$G:$G,0),2)
In D8, the value is Blue. Here is an example with made-up values (X is meaningless values) --
A B C D E F G
X Apple X X X X Blue
X Pie X X X X Blue
When I use the function, I want it to retrieve Pie, but it always retrieves Apple. Is there a way to ignore Apple? I've tried throwing "Apple" in there a couple different ways, but nothing is working. Or, if I can search from the bottom up, that would work as well.
I need a formula to count the zero's from a column and to put the value next to the 1 and when another 1 appears after a 1, it has to show 0, like in the example bellow.
example1.xlsx
I am looking for a way to ensure that all the leading zeros in one column are present without having to format the column cell be cell. Is this possible?
I have a list of dates in column A (sequential from low to high).
I have corresponding rainfall data in column S.
I am trying to find the longest run of 0's in the rainfall data and return the start and end dates. It would be great if i could tell it (in cell C8) to find the longest run below this number.
ie: i say i want to find the longest run of numbers below 5.
I've worked on this one way to long and thought I'd ask here now.
Column A Column B
A 1
A 0
A 0
B Blank Cell
B 0
B Blank Cell
B 0
B 0
I have a third cell that I would like to count how many zeros in Column B there are that correspond to the letter B in Column A. Blank cells cannot be counted. This answer should be 3.
I analyze logged data that often contain ZEROS in column L, always starting on row 35. That's bad data. The first row with good data contains the number 700 in column L, but this row number is unpredictable.
How to make a VBA code to exclude the rows that contain the number 0 in column L, searching between cell L35 (including) all the way to the first row containing the number 700?
I need to limit the range to be scanned for ZEROS because sometimes there are valid ZEROS in column L, but those would be in rows below the rows contain 700 in column L.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
=IF(COUNTIFS(A:A,">=10/1/12",A:A,"
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
How would you set up a macro to delete numbers in a spreadsheet in one column that appear in another column or worksheet?
In other words, if I have the numbers 1,2,3,4,5,6,7,8,9, 10 in one column and in the same column, or another column or worksheet I have the numbers 1,2,3,4,5 - I need a way to delete 1,2,3,4,5. I know how to delete duplicates via the advanced filter but I want to have the duplicate and original deleted.
I have a column of about 13,000 10 digit numbers. I need to add four zero to the beginning of each row of numbers so I can make it 14 digit numbers. Is there a way to do this without cutting and pasting four zero's for each row of numbers.
View 10 Replies View RelatedI have the following code
Call LastCell_Example(LastCell)
lastrow = Cells(Rows.Count, "B").End(xlUp).row
Set Datarange = ActiveSheet.Range("B1:" & LastCell)
' Set to 0 all cells that contain constants, but ONLY those that are numeric
Datarange.SpecialCells(xlCellTypeConstants, xlNumbers) = 0
lastcell_example contains
Dim rng As Range
' Use all cells on the sheet
Set rng = Sheets("Courtage").Cells
' Find the last cell
LastCell = Last(3, rng)
' Select from A1 till the last cell in Rng
With rng.Parent
.Select
.Range("A1", LastCell).Select
End With
When I run the code above, I don't understand the fact that the first rows in the sheet AFTER "Courtage" are also being changed to zero.
Obviously, I'm not limiting my datarange correctly, but could someone explain what I need to do to limit the changed data to ONLY the current sheet.
I have a worksheet which basically tracks time. the time is reported in Column C. In that row in Column E, there is a validation list with about 6 different categories in it. On the side of this "table" I have a list of all the categories and I want a value to be next to it that reports the sum of time (C) for each category (E).
So for the "Routing" category, I would want the value to be the sum of just data on the timesheet that have "routing" in Column E.
I have a spreadsheet which will be completed by numerous users, with a worksheet reserved for each area. The spreadsheet is to record the number of days lost to training etc on a weekly basis.
Each worksheet has 3 columns – column A DESCRIPTION, column B WEEK COMMENCING DATE and column C DAYS LOST.
The table will be completed by the manager’s as the info becomes available to them.
I will be collating the data on another worksheet and need a formula that will look in column B for all instances of 01/10/07 and then sum the corresponding cells in column C, then do the same for 08/10/07 and so on.
I have attached an example of a page.
I thought it may be VLookup or Sumif, but I don’t know how to go about it.
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.