At the moment I am using the formula
=IF(AND(B3>C3,D3,E3,F3),"eat less","eat more")
I want it to show me that if B3 is bigger than any of the other cells that you should "eat less". It works if a number is entered into every cell, but if a 0 is entered into one of them it comes up with "eat more" when it should be "eat less"
I need the values that are copied from the template to copy over in text form from the "Data" Tab. Secondly, the master sheet has multiple lines for each vendor. For the area highlighted in red I'd like for it to copy all cells in column C for the vendor and search the vendor by name. Then, move to the next sheet.
View 10 Replies View RelatedI'm calculating a variance for a set of actual numbers vs. variance numbers. When there are no actuals, I don't want the formula to calculate a variance. How can I do this?
Spreadsheet attached : Book1.xlsx
I have this formula =IF(EXACT($E3,N$2),$C3/$I3,"") This works
I now need to add another match condition to the formula using H3,J1 so it would be something like this =IF(EXACT($E3,N$2),(H3,J1),$C3/$I3,"")
But not working
i want to include the dropdownlist to VLOOKUP formula. See the attachment
View 2 Replies View RelatedStarting from D6 to the end of the data (could be F6 or AA6) I need to sum the total, but only if the column is visible.
View 9 Replies View RelatedWith the formula I have as:
=SUMPRODUCT(--(GLCodes=$B7),MasterNetAmt_01)
I want to dis-include the CC="06" in the summation. I tried using:
=SUMPRODUCT(--(GLCodes=$B7),(cc="06"),MasterNetAmt_01)
But it gives a wrong calculation
I use "--" because i have character in the cell
I have a formula to pick up certain bits of information depending on the contents of a cell.
=IF($F3="138-1",MID($E3,11,4),IF($F3="151-26",MID($E3,11,4),IF(MID($F3,1,2)="00",$E3,IF(MID($F3,1,2)="40",$E3,IF(MID($F3,1,1)="-",$E3,IF(MID($F3,1,1)="8",$E3,$F3))))))
The data in column F has a mixture of 8 digit numbers including numbers starting with multiple zero's, the numbers 138-1 and 151-26, then some text.
Orginally the 8 digit numbers only started 00 so it was easy to pull out the relevent information, then they started 40 and then 8. I'm just worried that I'm going to end up with too many nested 'if' statements (and reach the max limit), so I was wondering if I could do 'any 8 numeric digits' instead of this current 'dead end' solution.
I'm not sure if I could use a wildcard of some sort with the MID formula
I'm struggling to include a repeating 8 (or 4) weekly cycle in my sheet.
For instance, week 21 starts on 20-05-2013, than I would like to have the below cells filled untill 26-05-2013, following cells must be blank, untill 8 weeks are over, and the first date you see again is 15-07-2013, and so on. Using the MOD formula, I can get the first day of each cycle correctly, but I'm having difficult to get the next 6 cells entered and the next ones blank again untill 15-07-2013
I'm using now following formula, where B is the date:
Code:
=IF(MOD($B$264-B264;56)=0;B264;"")
but I need to nest another IF I guess that takes care of the rest.
I would like a cell to show either OK or No depending on the requirements of three other cells as below
G4 is the cell to show a value. For OK a date in G6 must be more than todays date, a tick must be in F6 and a date in D6 must also be more than todays date.
I can get G4 to do each section individually i.e. (A4 has todays date in it, updating automaticaly)
=IF((G6+365)
I am having trouble trying to develop a code to include into a spreadsheet for work. It will be a live spreadsheet accessed by a few people who will have control over there own columns in the spreadsheet (2 columns are designated for one project) Each Project director is to edit the info about their project.
So my goal is to put a code in cell C3 that shows the date that cells C4-32 and D4-32 were last updated.
Having a hard time putting this one together..Trying to do: Create a formula that counts how many cells in Column L, that fall within a date range and also have a specific category of "text" (Column E). What I've tried:=COUNTIF($L$4:$L$166,"
View 5 Replies View RelatedI want to sum number values in a column. I have used "=SUM(C4:C100)" and it works a treat. Now the twist. I have an adjacent column (Column D) and only want to add values in Column C, where a corresponding value is in Column D on the same row.
So for example if I have C5 as $1000 and D5 as 13/5/13, I want to include the $1000 value in the sum of Column C. However, if I have C5 as $1000 and D5 as blank, I don't want to include it in the sum.
How can you return a Vlookup as a true value in an If statement? For example
View 2 Replies View Relatedhow can I total three columns together, one with the value of #N/A, and two with figures in, without the total coming back as #N/A ?
View 10 Replies View RelatedI have the below macro designed to display a message box if a cell in the range specified is greater than the value in the designated cell (BF7). In the message, I'd like to include the value for the cell in another column, from the same row as the cell that met the condition.
For example:
Cell E11.........Cell BF11........Cell BF7
Mark....................1.......................0
What I want the message box to say: Mark worked too many days.
I understand how to include a cell value like so:
currently I'm working as project manage for a software development studio and I am using MS project for all my work. Since the development team aren't aloud to have a MS project license on their PC I have to copy their tasks from MS project and put them into Excel.
I would say that I am okay using Excel but not an expert. I want to create a formula that uses NETWORKDAYS to determines a finish date from a duration and start date.
The headers I would use for each column are Duration, Start and Finish. So I would like to be able to get a team member to put a duration down i.e 1 day and give me the start day and in the finish date it produces a finish date automatically without including Bank Holidays and Weekends. What would the formula be for that?
I have the same question as Madball and was able to work out the Worday function, however for my company, we work on Saturdays and or Sundays sometimes.
I would like to be able to specify from line to line if Saturday or Sunday needs to be included in the duration calculation resulting in a finish date, however if I can simply get one formula to work that includes Saturdays alone (most common working day of the weekend, and do work more than don't) it would be the most helpful, I think I can get it adjusted from there.
I'm trying to include 3 arguments in my IF statement:
If Q40 is Yes, and if P40 is No or blank, then new. I tried the formula below but it didn't work.
=+IF(AND(Q40="Yes",IF(OR(P40="No",P40=""),"New",0)))
I am trying to include two conditions into this IF statement.
=IF(ISBLANK('SHEET1'!W8),0,1)
I want to include the cell X8 in this aswell.
In the following formula I'm looking for MONTH 1 (January) and WEEKDAY 1 (Sunday):
=SUMPRODUCT(--(MONTH(Sheet1!$A$2:$A$6936)=1),--(WEEKDAY(Sheet1!$A$2:$A$6936)=1),--(Sheet1!$D$2:$D$6936=$D2),Sheet1!E$2:E$6936)
is it possible to find MONTH 1 and 2 (Janauary and February) and use the rest of the formula as is? Can the same thing be done looking for MONTHs 3,4,5 or months 8,9,10,and 11?
Does anyone knows how to calculate if translator is free or not, regarding that weekends are free ( I mean if weekends are free how to check if translator is able to translate a document)
View 9 Replies View RelatedI would like to include a message within this VBA code, not sure of the code to use.
ActiveSheet.SendMail recipients:="dan@aol.com", _
subject:="Your inputs are due", _
returnreceipt:=True
End If
My Excel VBA application needs to communicate with 2 XML files. Instead of compressing these XMLs with the Excel file in a Zip file, and send them to the client, I would like to include them inside the Excel file.
This way, I will only send the .xls file (the 2 XMLs will be included inside).
A colleague of mine maintains a spreadsheet with a worksheet of data for each month labeled "Apr'07", "May'07", "Jun'07", etc. He then has a summary worksheet that gives summaries of the various data fields on the monthly sheets. Currently he has been using the kludgy method of listing each cell to be summed. (e.g. " SUM('Apr'07'!A2,'May'07'!A2,etc.) Since he is dealing with a summary of about 200 rows by 15 columns this is a big pain to maintain. My first thought was to set up his formulas as a range of sheets rather than naming each; E.g. SUM('Apr''07:Jun''07'!A1)
Then I thought that rather than having to update each formula when he adds a new month, he would be better off having two cells that control the start and end sheet and having then feeding them into the summary formulas using the INDIRECT function.
However, try as I might, I can't seem to get the INDIRECT formula to work. In the attached example spreadsheet I have set up B1 and B2 to hold the names of the start and end worksheets, respectively. So my attempt at an Indirect Sum formula is the following: SUM(INDIRECT(" ' "&B1&":"&B2&" ' !A1"))
(Note: spaces added between " and ' for clarity) When I look at the formula evaluator it evaluates to SUM(INDIRECT("'Apr''07:Jun''07'!A1") and then generates a #REF error. What am I doing wrong here? I'm open to all suggestions of fixes to this method or an alternate method that would achieve the objective of performing calculations on cells across a dynamic range of worksheets.
If have very simple =IF function, =IF(F4=H4;1;0) but don't wan't the 'value is true' value when both cells are empty, how do I need to change the function so it states 0?
View 3 Replies View RelatedI am trying to find a formula for column D on the PO Costs EOY sheet. My criteria is as follows:
1. Column b on PO Costs EOY= Column A on Fabric and accessories
2. The order date in Column A is equal or in between the dates on rows 3 and 4 in fabric or basket accessories
3. I do not want to include in the some anything before order date, ie, if the order date is 8/8, i only want to sum 8/9 and greater.
The order date will always be on the last day of the week. So the sum would start the follow week.
By typing either first letter or first two letters in cell A2 the list box should bring up matching street names. Also listbox should manually allow to select required street name by scrolling down.
View 3 Replies View Related1 have figured out how to create an auto fill that is a mix of days in between. (When dates are not in a row.) For example, a schedule that starts a date, and then adds 2 days, then 1 day, then 3 days etc....it is for a tracking schedule. Once created those amounts are the same for for every row. The problem is, when it counts the next day, or 2 days or 3 days etc, it cannot include a weekend date, rather just 2 working days, or 3 working days etc.
Is this possible?
Right now, I start my first cell with a date, and go to the cell to the right, and in my formula, I type the previous cell address and I add (+) some value (2) to represent the day amount, but right now it includes the weekend days as well, and I need them skipped.
I have a set of values. #N/A413636363632. The #n/a is there on purpose for charting reasons. How do I calculate the stdev of that range? i.e. ignoring the error?
View 2 Replies View RelatedI have lists of room areas in metres squared, I extract the web based lists to excel: for example.
10.56 m2
14.23 m2
21.34 m2
How do i calculate the total of these amounts?
Is there a formular to remove the "m2"?
I have tried using =SUBSTITUTE(A1,"m2","") which deletes the "m2" from the cell, but then I can't use =SUM(A1:A3) as this totals the 3 cells as 0.
If i use =SUM(A1+A2+A3) the total is correct, but I have over 3000 cells in one column to add together.
Is there a formula or something to remove all instances of "m2" or "m3" from the whole sheet or another way i can calculate the totals.
