I have the following macro:
[Code] .....
So right now the macro is run in every single worksheet in the workbook. Unfortunately, it appears the TRIM function erases formulas in cells. I want this macro to apply only to certain worksheets. Say the worksheets i want the macro to run on are named A1-A100.
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
I have an excel workbook with about 40 worksheets. I have a formula in A1 of each sheet that returns a 1 or a 0 depending on whether or not the name of the worksheet is in a list.
What I am trying to do is create a macro that will print all worksheets that have a 1 in A1.
I recorded a macro in an Excel Workbook which contains 65 worksheets (--this is something received on a quarterly basis for which I have no control). The macro is successful within the workbook created however, a new quarter's data may or maynot have some of the referenced worksheets. 64.9 Waiv - 1 may exists and the others (2, 3, 4, etc) not. The macro fails and prompts for Debug if a worksheet does not exist.
Sheets("64.9 Waiv - 1").Select
Sheets("64.9 Waiv - 2").Select
Sheets("64.9 Waiv - 3").Select
Sheets("64.9 Waiv - 4").Select
Sheets("64.9 Waiv - 5").Select
Sheets("64.9 Waiv - 6").Select
Sheets("64.9 Waiv - 7").Select
Sheets("64.9 Waiv - 8").Select
Sheets("64.9 Waiv - 9").Select
Sheets("64.9 Waiv - 10").Select
Is it possible to alter the macro to look for and only invoke the code if a worksheet past 1 were to exist?
This is what I am requesting the macro do:
Sheets("64.9 Waiv - 1").Select
Range("B9").Select
ActiveWindow.FreezePanes = True
ActiveWindow.SmallScroll ToRight:=5
Range("J8").Select ...............
I used VBA codes to apply different passwords for different worksheets in a single excel workbook. They worked fine. Then i applied a password to the VBA code itself through the VBA project properties. Also worked.
But my problem is that, if any one enters a wrong password to open any of the worksheets, the VBA will open an error message window and when "end" option is clicked, the VBA code will open without any prompt for the password.Thus the entire purpose is defeated.
I need to run the below code on all work sheets:
Sub Remove_Duplicate()
On Error Resume Next
Columns("a").Insert
With Range("b1", Range("b" & Rows.Count).End(xlUp)).Offset(, -1)
.Formula = "=If(CountIf(B$1:B1,B1)=1,"""",False)"
.SpecialCells(-4123, 4).EntireRow.Delete
End With
Columns("a").Delete
End Sub
Basically I have lots of worksheets and I want to remove the duplicates in column B for each work sheet with a duplicate entry...
I have a workbook in which I have 31 sheets. I've also recorded a macro that works great when I run it on one sheet, but it comes up with an error when I try to run it on grouped worksheets. I searched Google, and a few articles I saw said that in order to run a macro on grouped sheets, you have to use loops. I don't know if this is true, but I don't know how to run loops anyway, so. I want to run the macro on 30 of the 31 sheets. I was going to put the code in, but when I did that my post didn't work, so I'm thinking there might be a limit on the length of a post.
View 5 Replies View RelatedCycle through all sheets in a workbook performing the following:Store worksheet protection state (bSheetProtection)... execute code ...Restore worksheet protectionI cannot seem to locate a way to save a worksheet's protection state in a variable.
View 5 Replies View RelatedI need to apply the following code to all the sheets in my workbook (they are all identical format)
rivate Sub mymacro1()
Application .OnTime TimeValue("10:27:00"), "MyMacro1"
Dim objOL As Object
Dim objItem As Object
Dim lngRow As Long
Set objOL = CreateObject(" Outlook.Application")
lngRow = 6
Do While activehsheet. Cells(lngRow, 1) <> ""
If ActiveSheet.Cells(lngRow, 6).Value < Date Then
Set objItem = objOL.CreateItem(0) 'constant olMailItem = 0
With objItem
.Body = "The training review for employee: " & ActiveSheet.Cells(lngRow - 5, 2) & " is due today """.....................
I don't know what syntax to use to 'globalise' if you like the macro to perform the action in the code to all the sheets.
Looking for For Loop to loop through 5 specific worksheets in a work book.
Something like this, but can't find right syntax:
For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter
I have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
View 2 Replies View RelatedI have tried Sheets("").Select to just have the macro work on any worksheet in a workbook not just on the specific worksheet (i.e.Sheets("4474-60-2").Select . Get an error though.
View 9 Replies View RelatedI have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies View RelatedI have a workbook named as "DCR_Summary". In the sheet "FX", I want to get the sum of a specific column from two different workbooks named as "WNCR REPORT" and "DCCR-REPORT". The name of the column is "FXCOLL". The summation should start in row 7 all the way down where data is available. The good thing is that, my sum range will always starts at row 7 in both files but the bad thing is that the position of column "FXCOLL" is changing every day. The expected result is shown in the attached "DCR_Summary". It should pick at the same time the Sheet names where the summation came from. Sheet names is also changing and sometimes the FXCOLL is nil, hence, 0 value can be returned.
View 5 Replies View RelatedI have this macro and all I want to do is apply it to every page of my worksheet with a loop and can't find what kind of loop I need:
Sub format()
' Keyboard Shortcut: Ctrl+r
'
ActiveCell. Offset(-37, 0).Rows("1:1").EntireRow.Select
Selection.Copy
ActiveCell.Offset(37, 0).Rows("1:1").EntireRow.Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.Range("A1:K37").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
Attached is the workbook : Datewise.xlsx
Need Macro to automatically printout my worksheets daily at a specifi time?
View 9 Replies View RelatedThis is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
I have a worksheet that I use to check invoice prices, which automatically indicates to me if any prices have changed, by using conditional formatting. For example, Column A contains original/current price. Column B contains new price (which I enter by hand and is calculated to round off, etc via other cells). If the price changes in B, a simple formula in Column C shows the new price and uses conditional formatting to turn the cell yellow so I can see that it needs to be changed in our system. However, we also must account for shipping charges on our invoice - which change with each order. So, when calculating new price, I also add shipping costs. This same setup repeats for every row of items.
My question: if I change the shipping, but only change the prices on a few rows, the prices on ALL the rows change because of the new shipping. Is there a way to say, select that only certain cells were (received with new price) and have the changes apply to only those cells?
Example:
Row 1
Cell A: current price including shipping from last invoice (which is calculated in several other cells to include shipping, round off, markup, etc)
Cell B: changed price (from invoice)
Cell C: compares A and B using =IF(F9<>H9,H9,"") and applies conditional formatting if price changed.
Row 2
(repeats)
If we only get a new order of row 1, the shipping changes. But I DON'T want row 2 to change it's price, since the price did not in fact change.
So basically, what I want is to be able to check off, or select, only the rows that come with latest invoice.
I attached a sample worksheet. Excel Forum example.xlsx
I have a module, which lists, by date, the number of instances of certain words as defined at the top of the column.
Anyway, this works fine - it operates on all sheets of a certain name type:
Sub display_all_false()
With Application
.DisplayGridlines = False
.DisplayHeadings = False
.DisplayOutline = False
.DisplayZeros = False
.DisplayVerticalScrollBar = False
.DisplayWorkbookTabs = False
.DisplayFormulaBar = False
.DisplayStatusBar = False
.ShowWindowsInTaskbar = False
.CommandBars("Standard").Visible = False
.CommandBars("Formatting").Visible = False
.CommandBars("Control Toolbox").Visible = False
.CommandBars("Drawing").Visible = False
End With
End Sub
But, when I run the code, seems there're run-time errors detected at these codes:
.DisplayGridlines = False
.DisplayHeadings = False
.DisplayOutline = False
.DisplayZeros = False
.DisplayVerticalScrollBar = False
.DisplayWorkbookTabs = False
1. Is there any way to correct these codes?
2. Does the bolded codes applied to ActiveWindow (Worksheet) only (eg. With ActiveWindow ...)? Can I change it to ActiveWorkbook (perhaps)?
3. Can the command menus (File Edit View Insert Format ...) be hidden also?
4. Does looping method for each worksheet
I am trying to include code into the end of my macro that will look in all worksheets and freeze pane row $1:$1
View 9 Replies View RelatedHow do you automatically list all the worksheets within a workbook? I did some searching and decided to use the following code:
Sub ListWorksheets()
'Lists all the sheet names in the workbook onto the _
first sheet (starting at cell a4)
Dim i As Integer
For i = 1 To Worksheets.Count
Worksheets(1).Cells(i, 1) = Worksheets(i).Name
Next i
End Sub
It would be very useful if I could control the row in which the data is returned. "starting at cell [U]a4[U] seems to be that part of the command, but it still returns in the 1st row.
I need a macro that will perform a set of oprations on all worksheets in a workbook. The names and number of worksheets will not always be the same. I have found several macros that look like they will do this, but when I try to add my code they don't seem to work.
View 9 Replies View RelatedI know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
I need macro to find worksheets (tabs) starting with word 'sample' in name and delete all instances of worksheets starting with that word.
View 1 Replies View RelatedI have been trying to create a Macro that can do the following.
Open a Excel Workbook, Copy the Worksheets that I need (ignoring ones that are not needed.), Save them in the correct location with a new folder of date and time and saving them as csv files.
I have all the elements but can't seem to get them to gel correctly.
Just wondering if anyone has anything like this that I could adapt or edit.
I am trying to modify the macro that I have put together so that it executes only specific worksheets within a single workbook. In this example, I would like the macro to update worksheets A, B, and C but I have more sheets in my actual file. I am only able to get the macro to work on the active sheet. Attached is my workbook.
VB:
Sub HideColumns()
Application.ScreenUpdating = False
Dim myRange As Range
For Each myRange In Range("B5:M5")
[Code] .....
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :-
Workbook1 is having sheet named aa, gg, tk .....
Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
I inherited a price list workbook made up of multiple worksheets (some 30 pages). Each year the new prices (including % increase) are calculated by a formula in the row below each price (100's of rows and formulae).
Thus:
C1 might say £10
D1 says =C1+(C1*2.5%) £10.25 (it actually does some rounding too)
etc
It may seem odd having both rows but MD can see the before and after. The new price 10.25 must however be manually copied to C1 to avoid circular referencing and then D1 row hidden. Very laborious to repeat 100's of times.
Is there a way of first copying the entire workbook for the new year (easy) then by means of a macro looping through each formula cell of all sheets in workbook 1 and pushing the result to the new workbook and to the correct sheet and then to the same location but to the cell above. e.g. pushing £10.25 from D1 of sheet 1 workbook 1 to C1 of sheet 1 workbook 2 to become the new price for the coming year?