I have tried Sheets("").Select to just have the macro work on any worksheet in a workbook not just on the specific worksheet (i.e.Sheets("4474-60-2").Select . Get an error though.
View 9 Replies
I have the following macro:
[Code] .....
So right now the macro is run in every single worksheet in the workbook. Unfortunately, it appears the TRIM function erases formulas in cells. I want this macro to apply only to certain worksheets. Say the worksheets i want the macro to run on are named A1-A100.
I have a workbook named as "DCR_Summary". In the sheet "FX", I want to get the sum of a specific column from two different workbooks named as "WNCR REPORT" and "DCCR-REPORT". The name of the column is "FXCOLL". The summation should start in row 7 all the way down where data is available. The good thing is that, my sum range will always starts at row 7 in both files but the bad thing is that the position of column "FXCOLL" is changing every day. The expected result is shown in the attached "DCR_Summary". It should pick at the same time the Sheet names where the summation came from. Sheet names is also changing and sometimes the FXCOLL is nil, hence, 0 value can be returned.
View 5 Replies View RelatedMy problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
I have an excel workbook with about 40 worksheets. I have a formula in A1 of each sheet that returns a 1 or a 0 depending on whether or not the name of the worksheet is in a list.
What I am trying to do is create a macro that will print all worksheets that have a 1 in A1.
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
Attached is the workbook : Datewise.xlsx‎
Need Macro to automatically printout my worksheets daily at a specifi time?
View 9 Replies View RelatedI have the following code that lists all the worksheets in workbook. I would like to have this list show only the worksheets that end in "SD". (For example, it would show "MainSD" or "CantonSD" but not "Main".)
View 14 Replies View RelatedI would like to use VBA to combine specific sheets. I have a workbook containing about 15 sheets but want to combine 6 specific sheets. All the sheets have the exact same headers and number of columns but the number of rows are different.
I found this VBA code that works but it combines ALL of the sheets in the workbook. How to modify this to combine specific sheets. How to combine all visible sheets if that's possible.
Here is the code I found...
Sub CopyFromWorksheets()
Dim wrk As Workbook 'Workbook object - Always good to work with object variables
Dim sht As Worksheet 'Object for handling worksheets in loop
Dim trg As Worksheet 'Master Worksheet
Dim rng As Range 'Range object
[Code] .........
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
I have two worksheets. On one worksheet under column G I have hundreds of random numbers, but I only want to extract a specific half. In the second worksheet I have two columns A and B. Column A has the exact numbers that I want to extract from Column G. I would like to get the numbers from Sheet 1 under column G listed under Sheet 2 Column B in reference to Column A.
View 9 Replies View RelatedI have five worksheets hidden in my workbook. All of these worksheets have either "Yes" or "No" written in cell C4. (3-yes, 2-no)
I also have a search bar in the form of a textbox and a command button.
I want to be able to type "No" in the textbox, click the command button and have the pages with "No" in cell C4 to unhide.
Some screenshots if necessary:
Sheet1 (yes): Gyazo - ce85d71bc03cd2ceaa1030e22445800f.png
Sheet2 (no): Gyazo - 65f876d6e7d749bd1ca25ad957fbda99.png
Sheet3 (yes): Gyazo - 0cb442f1d34e7d744884f73e1afe2646.png
Sheet4 (yes): Gyazo - 6f0ce150322208fd93dc5fc6f4f66481.png
Sheet5 (no): Gyazo - 772f48f8a82e53713794e6655fe56fca.png
master: Gyazo - 1b71470f3de47cef347050588bca819c.png
Looking for For Loop to loop through 5 specific worksheets in a work book.
Something like this, but can't find right syntax:
For iCounter = 1 to 5
If worksheet.name = "Recap" & iCounter Then
'do stuff
End If
Next iCounter
Let's say I have 6 Worksheets in my Workbook with the following names:
Sheeta1
Sheeta2
Sheeta3
Sheetb1
Sheetb2
Sheetb3
And I have three Subs that I want to run, one Sub for two specific Worksheets.
How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?
As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.
I'm building a spreadsheet which has a formula which performs a vlookup on a sheet. Now I want to leave the vlookup formula so that you don't need to change it. What I want to achieve is that the vlookup table array references a cell in the current worksheet which is a name of another worksheet.
What this will enable me to do is to keep the forumla unchanged by by changing the cell with the worksheet name in it points the vlookup to a different sheet. This is because I have multiple sheets which have similar data on and I don;t want to edit the forumla to point to the different sheets.
I have a spreadsheet of several sheets, but 7 of them (Red, Orange, Yellow, Green, Blue, Purple, Black) are the guts of the file and where I make adjustments. The layout of these sheets is the same, there are several cells of data on each sheet that coordinate with data in the same cell on other sheets. The problem is the sheets are so big, when I change sheets I have to go find the data that was in the same cell (or close) to where I just was on a previous sheet. So for example if on “Red” I am in cell AX253 and I go to sheet “Yellow” I would like it if AX253 would be selected when I get there. And if I select a different cell like D56 on Yellow and pick Green then I want D56 to be automatically selected on Green.
In addition, I plan to use a check box on an eighth sheet called “White” to turn the feature on and off. I have never written code for a check box before.
Is this to terribly difficult to do? I did some searching and saw some code that was similar to this but could not get it to work.
I am seeking the most efficient code to print all excel worksheets beginning with sheet "XYZ" and ending with the last sheet in the workbook.
- Sheet "XYZ" is always the starting point
- The number of sheets after "XYZ" is variable
- The names of the subsequent sheets are unique and not sequentially named/numbered
- The printing will be to one report (i.e. don't print pages individually)
I have a workbook with 25+ worksheets, all identical formats that each represent a different client. Each client is assigned a project team. I want to be able to sum up the worksheets by project team, but have flexiblity in doing so when I add new clients etc. So a couple of thoughts.
1. Is there a formula that I can create that compares the worksheet name to a list of names assigned to a particular client?
2. Can I reference a cell in each worksheet that identifies that sheet as a client that is to be included in the team summary?
Example of worksheet sequence
Worksheet - Summary Sheet - All Clients
Worksheet - Client 1 Team Alpha
Worksheet - Client 2 Team Beta
Worksheet - Client 3 Team Alpha
Worksheet - Client 4 Team Beta
Worksheet - Client 5 Team Alpha
Worksheet - Client 6 Team Beta
I want to create summary worksheets (identical to the individual client sheets) for each team.
Is there a way to compare specific data from three separate worksheets to see if they are equal?
I receive three daily reports that contain some of the same information that must match in order to correctly compile an Executive Report. Currently, I am doing this manually. Is there any way to automate the process to have a warning or something similar pop up if the numbers do not match?
I have an Excel file that has over 50 different worksheets to track earnings from different sources in multiple categories. Each individual source has its own worksheet and I've grouped sources in the same category together and color coded the worksheet tabs so that all sheets in the same category have the same color.
The color coding visually see where one category begins and ends using the scroll bar, but is there a way to mark the first worksheet of each category and jump (or tab) to it instantly as opposed to scrolling?
For example, in the attached file, I am looking to quick jump to the following worksheets: AA, FF, GG, C, G, K, and U. Is that possible to do through any sort of bookmarking or is that a feature that doesn't exist in Excel?
I need to update my Workbook to do something more. I have a Workbook that contains multiple Worksheets that contain a list of items that need to be inspected with a schedule date. What I want to do is consolidate all the items that have not been inspected and put it on one Worksheet within the same Workbook. Unfortunately I can't attach my Workbook so you can see what I'm talking about. Each Worksheet has these five columns and every inspection still required to be conducted only has the CSEC, Schedule Inspection Date, and Remarks Columns filled out. I would like to scan all Worksheets to copy this data and consolidate it into a seperate Worksheet so I can print only one Worksheet as my report vice over fifty.
CSEC# | Scheduled Inspection Date | Date inspection was performed | Inspection Pass/Fail | Remarks
I'm trying to find a solution to print to PDF specific worksheets in multiple Excel files. The files reside in the same directory, and I would like to be able to print them all at once to PDFs.
View 3 Replies View RelatedWhere i want to carry out a find and replace specific to different worksheets.
At the moment i have:
Sub Changeme ()
Dim SH As Worksheet
Dim rng As Range
Dim rCell As Range
Set rng = ActiveWorkbook.Sheets("sheet3").Range("A8:C10")
[Code] ........
Where column A contains the tab name, column B contains what to replace and column C contains the replacement.
I am attempting in the code below to copy all the worksheets from a specific folder into an array (for later manipulation), not to a single worksheet, The files open correctly, but the reading of the worksheets into the array is my downfall....
Sub FindOpenFiles2()
Dim FSO As Scripting.FileSystemObject, folder As Scripting.folder, file As Scripting.file
Dim directory As String
Dim wksht As Worksheet, i As Long, wkshtnames() As Variant
Dim wbNew As Workbook
directory = "C:Users"
Set FSO = CreateObject("Scripting.FileSystemObject")
Set folder = FSO.GetFolder(directory)
For Each file In folder.Files
Workbooks.Open file
Next file
For Each wksht In ActiveWorkbook.Worksheets
i = 0
i = i + 1
ReDim Preserve wkshtnames(1 To i)
wkshtnames(i) = wksht.Name
Next wksht
I have a workbook with multiple worksheets. On some of those worksheets a have merged cells, so in order to paste new data I need to unmerge them first. Below is the code that I wrote for it. However it doesn’t work and returns “Run-time error '1004': Application-defined or object-defined error”. I looked at this post List Maximum Value From Each Worksheet and tried adding With – End With, but it failed too. As far as I understood the problem is that the Worksheets/Sheets object does not support UnMerge property, but I may be wrong. If I add ws.Activate line (test2) everything works fine.
However I was wondering if there is a way to do it WITHOUT activating the worksheets.
Sub test1()
Dim i As Integer, ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Select Case ws.Name
Case "5 - Top Network Facilities", _
"5b - Top Arb Facilities"
For i = 0 To 9
ws.Range(Cells(2 + i * 5, 1), _
Cells(6 + i * 5, 1)).UnMerge
Next i
Case Else
End Select
Next ws
End Sub
In my attached file, I've atttached a sample whereby in Sheet1 to Sheet3 I have data with the same format.
I want to copy all data with TD_SUB_ACNT_CODE = ETMY0100 into Sheet4. My actual data actually have more than 10 sheets and the sheet count can be more.
I want to link him on all the spreadsheets, but his cell location is always changing because new doctors are being added every year. Is there anyway to link the specialty column with his name so that whenever his name comes up on the other worksheets, the specialty will be automatically filled in with the correct specialty value? I want to be able to do that with all the doctors.
Also, I want to highlight certain doctors in all the seperate sheets, I have Excel 2007 on my home PC, but on my work PC I have Excel 2002. To do this in Excel 07 I would just conditionally format the workbook to highlight certain names, but I cant seem to find a way to do this in Excel 02.
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
First one: The thought process is that inbound inventory data is logged on one sheet; outbound inventory data logged on another within the same workbook. When specific data from the inbound sheet (LPN column) is 'shipped' and entered on the outbound sheet, that specific data needs to be verified against the order number it was intended to ship against and if everything lines up, to have a TRUE value returned, or FALSE if not.
Second one: same type of thing - I'd like to look for the same specific criteria (LPN) between the inbound and outbound worksheets and if the same LPN is found on the outbound sheet, to return a value of "SHIPPED".
Third and fourth - same deal again except this time, would like to tie back the outbound Destination and ship date data from the outbound worksheet to the inbound worksheet.
A copy of the workbook is attached for reference with cells that require formulas highlighted in yellow on the inbound sheet and data cells from which the formulas will verify data in green on the outbound sheet.
I have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
View 2 Replies View Related
