Arrange Golf Teams
Apr 21, 2009
I run a spreadsheet that manages golf tournaments. i have to group
the # of players evenly as possible on each hole once they are entered into the tournament. since the number of players varies from tournament to tournament the math gets complicated trying to get the groupings right. i can do the math on paper but do not know how to code the math in a macro. this would save me a ton of time if someone can figure this out. i have attached a sample .xls that includes all the info i could think of a person needs to see what is going on. If i am asking to much i understand and will remove the thread.
View 6 Replies
ADVERTISEMENT
May 20, 2007
The team score is made of of 3 scores, the best from each age group. So the issue is to find the best (=lowest) for each club and for each age group. Add them & rank. Sometimes there may not be 3 scores to add up ( if they didn't have a team member in all three age groups or if their rider was eliminated. I'm easy about how to show who the team members are, could be as I've shown with the rider numbers in a cell or could be by "bolding" the score or anything else thats easy....
View 9 Replies
View Related
Sep 27, 2009
I'm trying to have an excel sheet that will keep track of teams. In Col A will be the name, Col. B is a score, Col C is # of wins, Col D is # of loss's. The range for the list will be A3 to D153. Now starting in M3 I want to beable to list the persons name and have the sheet pull over the original score and place it in N3. Once I mark if they win or lose in O3. I would then like the sheet to if they win add 4 points or if they lose subtract 4 points from thier score in Col B. I have use the VLOOKUP to be able to pull the scores from col B, but I'm not sure how to change the scores.
View 9 Replies
View Related
May 5, 2007
I am trying to assign a list of players onto teams but I need to distribute "skill" evenly to ensure teams are equally matched.
A statistician in the league suggested the best way to do this might be to sort the player list (descending) by the measure of "skill", then start assigning teams in blocks. If I have 40 players in the league / 4 teams = 10 players per team. I would randomize the numbers 1-4 (e.g. 3 1 4 2) and assign them to the first four players, randomize another set of 1-4, assign them to the next, and so on...
I could then sort the player list by “team assignment” column and have hypothetically equal skill on every team.
Couple of complications... number of players and teams might vary season to season. I will have to enter in number of teams and number of players at the beginning of each season along with a new list of their stats. Also, although I have a limited knowledge of Excel and VBA, none of the other coaches do so I want to make this as idiot proof as possible.
Using various macros (or functions) I found here I was able to randomize the first "block" of players but I cannot complete the randomizations for the remainder of the list. The only solution I have found would be to manually create an array using the “RandUnique” function over X (depending on number of teams) cells and then copy and paste this randomized subset down the rest of the player list.
See attached for sample data.
View 9 Replies
View Related
Dec 1, 2007
I am creating an hourly schedule (for a calendar year) that shows rental space occupied by 4 different groups (baseball, softball, soccer and football). I have created worksheets for each group and am entering proper names. I want to be able to search the worksheets for ANY text and return a value to a master sheet based on the group they belong to. If the cell is empty I want it to remain empty in the master sheet. Example: Ed Jones is entered in sheet 1, cell a15, and will show as "Baseball" on the master sheet cell a15, Mary Smith is entered in sheet 2, cell b16, and will show as Softball on the master sheet, cell b16, etc. The sheets are divided out into sports fields that they can rent. Multiple sports can rent the same fields so it is important that my master sheet show who is renting the field that day so it can be set up properly and they don't get double booked.
View 5 Replies
View Related
Jun 10, 2008
I need to randomly pair players together to form teams.
For example:
Saturday morning, there are 19 golfers signed up to play together, but want to paired randomly.
This is what we currently do:
In cells A1:A27 I type their names. In B1:B27, I type their handicaps.
We then use a deck of cards to randomly draw teams. We do this by pulling 4-A's, 4-k's, 4-Q's, 4-J's, and 3-10's from the deck. We shuffle these cards and then go down the names in colum A and assign each palyer a card and place the card value into column C. We then highlight all three columns and sort by column C to form teams.
This works ok, but the problem is they all tee off at the same time and need a "super quick" process to form teams in seconds.
The only variable that I might see being a problem is the # of players vary each time they play. There might be 12 one day and 51 the next. We have to form teams into 4 somes and 3 somes, based on the total number of players we get.
View 9 Replies
View Related
Aug 17, 2008
i am trying to make a spreadsheet up which will calculate and sort out teams in a league table for my local football team. basically, i have around 6 teams in the league and they need to be sorted via: points, then goal difference, then goals scored and then by the match between the two teams if still equal. I have managed to work out how to get excel to calculate all of the numbers of wins and losses and goals scored, etc but cannot find how to rank the teams in order regarding how i just explained.
View 9 Replies
View Related
Apr 24, 2014
What i'm looking to do is create a spreadsheet where the first page allows me to input the number of teams in the group.The teams cannot play others in the group except the ones they are paired with. eg. "Enter number of team pairs in set" (in this case 4)
Team 1a vs Team 1b
Team 2a vs Team 2b
Team 3a vs Team 3b
Team 4a vs Team 4b
After number of teams in set is established click a start button on the first tab of the spreadsheet.
this auto generates a new tab with all the possible win/loss combinations of 4 team pairs.
New Picture.jpg
if the number of teams on Tab 1 is changed (say to 6) and the start button is clicked, another new tab is generated with all possible win loss combinations of a 6 team set.
remember 1a vs 1b can only be win or lose and the win lose combinations are for the set of 4 matches ( or more matches if specified on the first tab and clicked).
if you put 7 in for the number of team pairs then it would be win loss combos for 7 pairs of teams.
View 7 Replies
View Related
Oct 11, 2009
I want to rank a list of teams based on their win/loss record. The list is something as follows.
Team A0-3
Team B0-2
Team C2-0
Team D1-2
Team E2-1
Team F2-1
Team G0-2
Team H3-0
Team I1-1
Team J1-1
Team K2-1
The column with the actual score contains the formula, =INDEX('2009'!$C$3:$BL$3,MATCH($A4,'2009'!$B$1:$BJ$1,0)). I would like to rank the list to something like,
Team H3-01
Team C2-02
Team E2-13
Team F2-13
Team K2-13
Team I1-16
Team J1-16
Team D1-27
Team B0-29
Team G0-210
Team A0-311
View 4 Replies
View Related
Feb 28, 2012
I have a table with sales teams down the left, and products along the top.
The table shows how many sales of each product a team has made. This is populated from a sales data dump each day.
I need a second table with all the products along the top, and beneath each product, a list of which Teams have sold that product.
do I need some Index / Match style formula here to pickup up each team from the left in the first table that's got a sales value higher than 0 for a particular product?
View 5 Replies
View Related
Jun 4, 2009
i use it to arrange players for every hole during golf tournaments. The present sheet (that i have attached) will allow as few as 2 players per hole. i have been informed that it should not assign less than 3 players per hole. the math in the code needs to be adjusted so that it knows to always start with 3 somes and work up from there. i can do the math on a sheet of paper i just don't know how to code the math . the attached sheet is what a member on the forum previously did for me. i take no credit for it, i am not capable doing what this sheet does for me.
View 4 Replies
View Related
Feb 6, 2009
Not sure if this is do-able but I figured I would try. For a golf league coming up later this year I want to figure out how many Birdies, Pars, Bogies, Dbl. Bogies and Others each (20) golfers have during the season. After each round I would input their scores and I am looking for a program that would look at the score of the hole and the par for the hole and figure out what they got 1 under par = birdie, even par = par, 1 over = bogie, 2 over = dbl bogie and 3 over = other.
I started by creating a simple if statement but it ran out too long and my other issue is adding up the number of birdies, pars..etc for each round. Meaning a golfer can have bogies on hole #1 and #2 and the if statement can take care of that but how would get a total saying the golfer had 2 bogies.
Something like this with the - meaning a column.
birdies Pars bogies dbl bogies others total holes
4 - 5 - 3 - 4 - 4 - 5 - 6 - 5 - 8 1 4 2 1 1 9
I would do this each week and total the number of each to keep a running total at the bottom of each column. We play on the same course each week so the pars for each hole can be hard coded.
View 9 Replies
View Related
Feb 15, 2008
I am trying to compute the handicap for a golf group. We base our handicaps on the lowest 4 of your most recent 5 rounds. I have no problem selecting the 4 lowest of 5 using the SMALL function. My problem is have the formula select only the most recent 5 rounds. Because everyone doesn't play every day the five most recent scores might be over several weeks and the others might be in the last week.
I am only entering the adjusted score (not hole by hole). The header columns have the date played.
The formula currently shows =SUM(SMALL($F9:$J9,{1,2,3,4}))/4.
View 9 Replies
View Related
Jul 5, 2008
I have been putting together workbook for my golf analysis.
Against each hole (1-18) I enter in one row which club I used from the tee which could be any of the following: D,3w,5w,1,2,3,4,5,6,7,8,9,w,s.
I also have a row that says whether I have hit the fiarway or not. If hit fairway = 1 if missed = 0.
What I want to be able to do is show the % of times I hit the fairway with each club. This would seem ida for the if function but I'm not quite sure how it would work because the result row is going to need to look at every hole to see if the club used was d,5w,3 etc etc and 'if' so then it will need to look at the row which says 'hit fairway or not' i.e. 1 or 0. This is where I get lost and am not sure if I do need the 'if' function or something else? Perhaps I need additional rows?
View 9 Replies
View Related
Aug 7, 2009
I am organizing a golf scoreboard for my golf tournaments. Basically, this is what I want to do:
I would like to rank the players that are entered by their score, in ascending order. Basically, I want to take the column for "total strokes" and organize the numbers so that it will rank the numbers that are entered. If there are no numbers entered in a specific row, I don't want that "zero" to be ranked in the list. So for example, if I have five golfers but they are spread out over 10 rows, I would still need to have five numbers in the rank: 1,2,3,4, and 5, not 1 to 10, as if it were ranking the rows that have nothing entered in them.
This is how it will look:
Johnson - Strokes : 70 - Rank :1
Williams - Strokes : 75 - Rank : 3
Patterson - Strokes : 72 - Rank : 2
View 9 Replies
View Related
Oct 7, 2006
I couldn't find a solution to where I'm at now, but Derks formula...
= SUMIF($J$5:$J$44,J5,$K$5:$K$44)/COUNTIF($J$5:$J$44,J5)
from...
excel formula
...Almost gets what I need, but my data will not always be in a high/low descending order. I'm braindead; I can't think of how to make this formula work.
View 9 Replies
View Related
Mar 14, 2008
I am creating a workbook to manage golfer scores, teams, winnings, handicap, ect. I am having trouble with the statistics sheet. I Need A Sub To:
1. Column "B" , take the average of the lowest 5 numbers in columns "AB" though "AU"
2. Column "C" , take the average of the lowest 10 numbers in columns "G" through "Z" divided by 0.96
3. Column "D" , take the average of the lowest 10 numbers in columns "AW" through "BP"
this needs to happen for each row where there is a name. (names added daily)
I have included a similar sheet as the one i am working with along with some command buttons typically not included. Should show some of the problems I am having.
View 5 Replies
View Related
Dec 30, 2013
I am building a golf spread sheet with page 1 being where I will input scores, also on this page I have a drop down list with the 9 golf course names. What I have done is I have added 9 sheets with the names of each golf course, on this sheet I have added the scorecard. So what i am wanting to do is, on sheet 1 use a drop list with the name of the course, then choose what tees we are using and let it populate on sheet1 hole 1 thru 18, with the yardage and par for the hole.
View 4 Replies
View Related
Mar 18, 2007
Just starting to use excel and have a problem I hope someone can solve. Trying to set up handicap system for golf league. Column A is players. Column B shows average of last 5 rounds played and rounded to nearest whole number. column C shows the same without rounding. column D and beyond show scores with column D being the most recent. Have this all this working well with one problem. Each week I insert new column D, enter scores, and everything is recalculated. How do I deal with absent players? Is there a way to enter perhaps "A" for absent and excel will know to count the last 5 cells with numerical values only?
View 14 Replies
View Related
Jan 31, 2014
I run a golf society and need to set up a golf aggregate sheet that will allow me to enter the players weekly scores and the sheet will then look for the lowest score entered for each player and replace it with their score of this week.
View 13 Replies
View Related
Jan 15, 2006
I would like to set up a Excel spreadsheet for golf handicaps where it will use the 4 lowest scores of the last 5 entries. It must be able to work even if there are missed entries (someone didn't show up/blanks ignored). I would like it to work if there are only three scores used at the beginning of the season, but when there are 5 or more scores, use only the 4 lowest scores out of the last 5. I want it to average these scores. The scores would start in column d. The following is an example of scores with an underscore being a blank:
Golfer 1 45,50,42,43,46,37,45,45,46,44
Golfer 2 41,43,42,_,41,_,_,47,42,39
Golfer 3 44,43,45,54,_,45,43,40,42,_
View 9 Replies
View Related
Jul 15, 2006
If the number in one cell is larger than the number in another cell then i would need a 2 added to yet another cell.
I the first two cells are equal then I would need to add a 1 to that 3rd cell.
View 3 Replies
View Related
Apr 21, 2014
organising a golf tour for 32 players.playing in teams of 4 (4 Balls) for 4 games of golf and the teams are to be randomly selected such that no player plays in a group with a person he has played with in a previous game. finding it difficult to create a spreadsheet which meets this criteria.
need to build into the spreadsheet the fact that the variable mix of people is constrained by the fact that at least 4 persons have to use a buggy (which will have 2 people in it) and as the tour progresses and courses become physically demanding a number of people (N) for the last 2 rounds may also ask for the use of buggies as well.develop a spreadsheet to make the 4 Ball team selections.
View 2 Replies
View Related
May 25, 2008
I am using Excel 2002 in Xp and also want to use the spreadsheet on my Pocket PC using Pocket Excel.
I have a column of 10 numbers with rows 1,3,5,7 & 9 representing the individual gross scores of the 5 team members. Rows 2,4,6,8 & 10 have either a 0 or -1 (calculated) in them representing the strokes (or discount) the player receives for that hole. So the net scores for each player will be row 1 + row 2 and so on.
I need a formula that will calculate the total of the 2 lowest net scores and 1 low gross score with the score for each player only being used once which will then represent the team score for that hole.
A sample column would have 4,0,3,0,4,0,3,0,5,-1 in it.
View 9 Replies
View Related
Jul 28, 2014
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N:
=SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O:
=INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula)
=INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
Column A = golfers names
Column L = list of all golfers scores
Column N = lowest ten scores in order
Spreadsheet Attached : Golf Excel Score.xls‎
View 11 Replies
View Related
Apr 25, 2013
I am trying to create a golf table that shows how many games are played how many points are given for 1st 2nd 3rd and so on we give 10 pts for 9 for 2nd and so on......
View 12 Replies
View Related
Jul 28, 2014
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N:
=SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O:
=INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula)
=INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
Column A = golfers names
Column L = list of all golfers scores
Column N = lowest ten scores in order
View 4 Replies
View Related
Apr 1, 2008
I need a formula to figure the 5 lowest of last 6 sores, since everyone doesn't play every week there would be blank spaces and it needs to just give me the average if they have less than 6 scores!
I have manipulated the formulas until I am blue in the face and cannot get it to work;
View 9 Replies
View Related
Jun 10, 2006
Golfers have a numeric handicap based upon their proven ability (reported scores); the lower the handicap, the better the golfer.
My golf group is randomly drawn into handicap-balanced foursomes. If 24 guys are playing, six teams are created as follows:
1) The six players with the lowest golf handicaps are "Captains," and are randomly drawn.
2) After the Captains are drawn, the six players with the next lowest handicaps are then randomly drawn as the #2 players for each team.
3) The same process is followed to randomly determine the #3 player and #4 player for each team.
If the number of players is not divisible by four, some threesomes are then created, and one, two or three players are then on two teams. e.g., If we have 29 players, we draw 5 foursomes (20 players) and 3 threesomes (9 players). In this event, each threesome will use the scores of a randomly drawn player (Ghost) from one of the five foursomes.
(Each Threesome's "Ghost" player should be drawn from the group [captains, #2's, #3's, #4's] which will best round-out and handicap-balance the team.)
View 9 Replies
View Related
Aug 4, 2008
I have an excel document with a list of about 12,000 names/addresses. They are currently displayed like this:
A B C
1 <name1> <name2> <name3>
2 <address1> <address2> <address3>
3 <zip1> <zip2> <zip3>
...and I want to re-arrange them so they are displayed horizontally:
A B C
1 <name1> <address1> <zip1>
2 <name2> <address2> <zip2>
3 <name3> <address3> <zip3>
Is there any possible way of doing this quickly without copying/pasting 12,000 lines of text?
View 2 Replies
View Related
