I have the following array formula written in cell E2 of my worksheet. Column A is filled by copying a list of names from another sheet, list starts in A2. This list is dynamic and I am trying to find the correct code to copy the array formula down Column E as far as the length of the list of names in Column A.
Note that the formula presently works as far as row 200 but I also need the macro to write the formula so that $A$200 and $D$200 also changes to suit the number of rows filled in column A.
I have an array formula that I want to apply to all the cells in a column with the exception of the = variable. Haven't been able to do anything but get it in the same relation ie.
{=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C7,'CO Angler Data'!R7:R106,0))} becomes {=SUM(IF('CO Angler Data'!K39:K138='CO Am Data'!C39,'CO Angler Data'!R39:R138,0))} in column 39 when I want it to be {=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C39,'CO Angler Data'!R7:R106,0))}.
Can I do this easily or do I have to do it manually like I have been?
and am copying it to other cells using this Sub copyformula() With Sheets("Sheet2") .Range("B3:B5000").Formula = .Range("B3").Formula End With End Sub It does the copy but removes the { and } thus rendering the formula useless to me. How can I accomplish this task and keep the formula as an array formula?
I tried to drag the formula down and recorded it as a macro but when it runs it takes far to long.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
I'm trying to have a macro write down an array formula, but when I hit ctrl+shift+enter, the recorder says it can't record. If I write in the macro ...FormulaR1C1 = {=...} then I get the formula as a text. Is there a way to tell the macro that a formula should be entered as an array formula?
I wonder whether I'm using the code below to copy data from two 'Source' sheets to one 'Destination'.
[Code] .......
The code does copy and paste the correct inofrmation, but the problem I have is that the data from the latter sheet i.e. "IDEAS Actuals" overwrites the data from the "IDEAS Forecast" sheet.
How I would be able to change this so the data is copied underneath each other.
Currently the code I have doesn't copy the Cell to the corresponding column I want it too with an array.
Dim ResultCodeErrorIndexArray(1000000,8) As Long
Code: With Worksheets("Geocoding Problems").Range("D1") For Each Cell10 In Range(.Offset(1, 0), .End(xlDown)) For i = 3 To 10 If Mid(Cell, i, 1) = "-" Then If i = 3 Then ResultCodeErrorIndexArray(Newcount, 0) = Cell10
I have a file. In sheet1, Array from row 2 to row 16 named "Vung1". array 2: row 20 -> 27 with name "Vung2".
I need: In sheet2, if I select "Vung1", Below with echo "Vung1" from sheet 1 (Keep format) and if I select "Vung2", it will echo "Vung2" from sheet1 (Keep format too).
I want a macro that if a certain cell on a row in column F on my worksheet is "6" then copy the cell in columns B and H on the same row are to be copied into an array and then when the loop is done, display the copied cells in a msgbox.
Is there a simpler way to do this without fidgeting with an array?
I am attempting in the code below to copy all the worksheets from a specific folder into an array (for later manipulation), not to a single worksheet, The files open correctly, but the reading of the worksheets into the array is my downfall....
Sub FindOpenFiles2() Dim FSO As Scripting.FileSystemObject, folder As Scripting.folder, file As Scripting.file Dim directory As String Dim wksht As Worksheet, i As Long, wkshtnames() As Variant Dim wbNew As Workbook
directory = "C:Users" Set FSO = CreateObject("Scripting.FileSystemObject") Set folder = FSO.GetFolder(directory)
For Each file In folder.Files Workbooks.Open file Next file For Each wksht In ActiveWorkbook.Worksheets i = 0 i = i + 1 ReDim Preserve wkshtnames(1 To i) wkshtnames(i) = wksht.Name Next wksht
I have a query about using Array Variables in excel VBA. I have a set of lookup tables and a main data table. The data table will be downloaded everyday. I need to replace the ID's in the main table with actual data from the Lookup tables.
e.g. Main Data Table Color Operator 005--325 005 004--326 004 003--327 001--328 002--322
Lookup Color 001 - Red 002 - Blue 003 - Green 004 - Violet 005 - White
I have a huge amount of data in the main table. So I can't use a lookup formula for automation. Rather I would like to use VBA to create array variables, scan and copy the lookup data into the array and replace the ID's in the main table.
Only that I am unable to achieve this using arrays. I am very basic in executing code related to Arrays.
The final column is the total for each row. Instead of using =sum(a1:a5) then dragging the formula down thus creating a new formula for each line, I want to use a single array formula to achieve the same result. I have tried =sum($a$1:$a$5:$e$1:$e$5), even though all my instincts said it did not look right. And I was right!
I'm sure it is easy, but I just cannot work out the syntax.
I have an formula for calculating the factor of a number this a fairly long array formula I decided to try to write this in vba to use as a user defined function. I first decided to record a macro of me writing the formula in excel to see what the code looked like, this I then adapted in another module copying the basic formula in a function procedure. my recorded macro works fine when I run it but my adapted function shows an error namely that the FormulaArray is not defined. I've tried all kinds of variations but with no success. how do I write an array formula in V.B.A.
I have a list in excel that contains the same sku more than once on a workbook in no paticular order, however i want to bring back the last time that this sku appeared on the workbook for example:
SKU 271562 date counted 11 september SKU 275555 date counted 12 september SKU 271562 date counted 12 september sku 255212 date counted 13 september & so on SKU 271562 date counted 11 october
The date range is only applicable to the date counted therefore i cannot search via a date
2. vezerid Oct 13, 7:09 pm show options
Newsgroups: microsoft.public.excel.worksheet.functions From: "vezerid" <veze...@act.edu> - Find messages by this author Date: 13 Oct 2005 11:09:27 -0700 Local: Thurs, Oct 13 2005 7:09 pm Subject: Re: Excel help Reply | Reply to Author | Forward | Print | Individual Message | Show original | Report Abuse
I have a lengthy array formula that I try to enter using VBA. I get the common run-time error. I tried breaking it down, but that did not work. Maybe the syntax was wrong in the break down. Can some help out please?
=IF(COUNTIF($B:$B,B2) 1 Then Range("B" & x).EntireRow.Delete End If Next x Application.ScreenUpdating = True
I have a custom UDF (user defined function) that I have been using for about 2 years with success. I am now trying to use it in an array formula and getting a #Value! error.
The UDF looks like this...
=MyUDF(A1,B1)
...where A1 is a string to be evaluated and B1 is a number. Basically, the function returns another number depending on the relationship of the two inputs. I have not had any issues in the past using it as shown above.
Now, I would like to use this function on a range of cells and sum the results. Here is what I have now...
{=SUM(MyUDF(A1,B1:B100))}
Does anyone know why this returns a #Value! error?
