I have a long header I am pasting to a column "A" on a new Sheet. When the header pastes it is repeating itself but with long blank spaces in between each repeat. The first time goes from A1 to A152, which is all I want. But it shows up again starting at A180225, and again at A212993, and again and again. I only want a single instance of the header in Column A. Here is the macro I am using:
Sub Sort_Cells() Rows("1:1").Select Selection.Copy Sheets.Add after:=Sheets(Sheets.Count) Sheets("Sheet1").Select Columns("A:A").Select Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _ True, Transpose:=True Selection.Columns.AutoFit Range("B1").Select End Sub
I think I have a very straight forward problem, I'm copying about 400 values from one workbook to another (from vertical range to horizontal range) and I currently have about 400 lines of code in order to do this. Below I've pasted the code I'm using now but the macro takes an estimated 30 seconds to run. I figure if I can reduce the number of lines the macro will run a lot faster
RowCount = openWb.Sheets("Library Raw Shear Rates").Range("A3").CurrentRegion.Rows.Count With openWb.Sheets("Library Raw Shear Rates").Range("A3")
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
following is code for search in the sheet and give result in other sheet
Private Sub Searchbton_Click() 'Serach button click 'for search Dim a(), r As Range, res, i As Long, ff As String, rng As Range Dim title title = Array("Sr.No", "File#", "Client File#", "Client", "State", "Borrower's Name", " Date Received", "Date & Time File Started", "Title Ordered on", "Type of Search Ordered", "Title Follow up Date", "Title Received on", "File Completed on", "Date & Time E-Mail Sent to Client", "Status", "File Canceled Date", "Remarks", "Done by") res = Application.WorksheetFunction.Substitute(Me.TextBox1, "-", "") If Len(res) = 0 Then..........
Problem is when we search for any data and if the recorded data exceeds 307 or more rows, the result will not show the data beyond 307 & more. it take to the Error : Run-time error '13' :Type mismatch error and cursor goto:
I have a dimensional array / matrix that is current a 9 by X, where x depends on the amount of entries a user makes.
Anyways my question is that I have a sheet called "Database" and I wanted to know if there was a simple code to transpose my array on that sheet starting at cell "A2".
I have a string which follows this format: "App Alg FMA", "App Pgm FMA", "App Slf FMA" This string can shrink or grow dynamically depending on the number of App*'s selected. How can I split this string and load the App*'s into an Array so the array would contain the following
I've tried using a Pivot Table, a Match Array V-Look Up formula I found on here (and can't seem to find anymore) that I altered to fit my cell needs, and even implemented RP-Excel.
This is an example of what I have:
Box 101 101 102 102 102
[Code]...
This is an example of what I'm trying to do:
Box 101 102 103 104
[Code]....
Additional challenges:
The actual workbook is over 4,000 rows long with a lot of various other information in neighboring columns.
The dates represent each time a specific box was filled. Some boxes only filled once, some up to 14 times. I only want up to the first five fills.
Able to try any of the following, or combinations of: Formulas, Pivot Tables, VBA, RP Excel
I have a col of dates that change, 9/15, 10/15, 11/05 and reside in col. I I then have a corresonding cell in row I136, M136, Q136, U136, Y136 and AC136. I want to find the starting at the earliest date starting in I36 , M136, Q136...
So I136 would be updated to 9/15, M136 = 10/15, Q136 = 11/05, ...
I am thinking a CSE type formula would be a possibility, but need assistance in this or in a piece of code..
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
Code: Sub populate() Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I have employee Clock IN - Clock Out as shown in Column A thru C. An employee can have more then 1 Clock In Clock Out as shown for Employee Name Karmen and Haley.
As shown, each employee is separated by "----------------------" and it ends with "REPORT END"
I would like a VB Code to transpose the data as shown in Column G thru H ...
I'm trying to transpose 5 cells vertically into 5 cells horizontally, then do the next 5 verticals under the 5 horizontals. See attached spreadsheet for Column A (original data) and horizontal data (result). VBA code would be most useful, and original data could potentially be 600 cells long.
I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.
I have a transpose copy macro working correctly, which takes selected cells in a row and copies/pastes them into vertical format for word or notepad.
I would like to however improve it by added "labels" in front of certain cells of the row being copied. These labels are found in the header row of each column, but inserting the static labels as part of the past function would work better as only certain cells will require a label.
see the attached file below. I have monthly precipitation data for yrs 1950-1999. I need to have the data formatted such that the precipitation data is copy/pasted into one single column, going all the way from jan 1950 to feb 1950 (next row) to mar 1950 (next row).....dec 1999 (last row). On occasion, I will also have data for shorter/longer time periods. the macro code I'd need to take this data and line it all up into one single column?
I have a spreadsheet which contains many rows (>3000) and a few columns.
I would like to make a macro that will copy specific cells depending on the number from another cell (from the first column) and then transpose the corresponding values. My current problem is that the values I'd like to copy (countries) are on a row (horizontal) and I need it on a column (below "Countries") next to the car models (in black: the current sheet, in red: my target):
Number of Countries Cars Countries
A FJ
A UK
[Code] .......
Is it be possible to create a macro that transposes automatically the countries from the right into the third column (like 90 degrees against the clockwise direction)?
Copy a specific row of column summations (row to be copied varies by # of entries for the month) from each sheet in the workbook into sequential columns on the 1st Sheet. For example, copy Sheet2Row103 columns A thru O and transpose to Sheet1 column “A” rows 1 thru 15, Sheet 2Row56 column A thru O and transpose to Sheet 1 column “B” rows 1 thru 15, etc.). Excel fails to identify the Sheet Number/ Name if you use copy, transpose and paste, it only works if the transpose is performed on the same Sheet!
Im trying to create a Macro which can do the following: Go to the selected cell when Macro is run, keep going down cell by cell until it finds a blank cell, select the values, copy them and paste them by transposing into the cell next to where it started from in a row, carry on doing this procedure and pasting the transposed values next to the first non blank value until it gets to the end of this column.
I need to copy and paste transpose, some over 100 values, but I want to add a comma after each value, so they can be put into JD Edwards for running a report.
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A row 1 ABCDE row 2 FGHI row 3 Party Name:Abcd row 4 JKLM row 5 nopq row 6 STUV row 7 Party Name:ryz row 8 Party Name:mno row 9 XYZ
I want the results as below:
Column A Column B Column C Column D row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno
I have a workbook with data in it that I want to copy and put in another wookbook. The data looks like this.
D11/22'2005 CX T-7.80 PEl Azabache LDining Out (blank cell) D11/22'2005 CX T-9.50 PAce Hardware LHousehold (blank cell)
What I want is a macro to copy that data until it finds a blank cell and paste/transpose that data in another workbook and then get the next set of data until an other blank cell.
It should look like this when done.
D11/22'2005CXT-7.80PEl AzabacheLDining Out D11/22'2005CXT-9.50PAce HardwareLHousehold
I have 10 file in a folder and in that there is address, pone and other detail of employees in these sheets it will be static from D3 - D13 rows. Which is of below format:
Original format Name Address1 Address2 Phone Sex etc..
I want to the above data to populate from these 10 sheets to one sheet (new workbook) as columns as below format :
Sl.#, Name, Address1, Address2, Phone, Sex etc...
I want to write an macro to achieve this. Please let me know your views to achieve this functionality.
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
I have a sheet with products down the side, and dates across the top. Numbers will be entered at an intersection between dates and products to represent quantity. Whenever there is a non-blank value for the quantity, I need to copy the products, dates, and quantity into a traditional database format. I have attached the original data format I get from suppliers on when they will deliver, and then show a separate tab for "Desired Result"
writing a macro that could save me loads of time. In the attached file there are 2 separate sheets of data ( named "Elements Innovation" and "Dinttap") that I need copied, pasted, transposed and consolidated into one master sheet (named "Desired result"). Note that the fields that relevant cells are highlighted in yellow. In reality I'll have many (~100) of these sheets that I need the data extracted from, and the work looks like it can be automated using VBA to speed things up.