Array - Copy Cell To Corresponding Column
Mar 26, 2012
Currently the code I have doesn't copy the Cell to the corresponding column I want it too with an array.
Dim ResultCodeErrorIndexArray(1000000,8) As Long
Code:
With Worksheets("Geocoding Problems").Range("D1")
For Each Cell10 In Range(.Offset(1, 0), .End(xlDown))
For i = 3 To 10
If Mid(Cell, i, 1) = "-" Then
If i = 3 Then
ResultCodeErrorIndexArray(Newcount, 0) = Cell10
[Code] ......
View 7 Replies
ADVERTISEMENT
Jun 19, 2006
How to copy an array to an array of the same size without changing relative
cell references in the formulas?
View 12 Replies
View Related
Oct 23, 2009
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
View 2 Replies
View Related
Jul 21, 2009
I have a column array with various cells in that array populated. In every subsequent cell in that array I want a formula that finds the previously populated cell and that value added a cell that is in the same row but two columns to the left.
View 13 Replies
View Related
Feb 27, 2012
I need a code to copy the color of column B and put in the respective cell in Column A. I just need the color to copy from column B to Column A.
View 6 Replies
View Related
Aug 21, 2008
I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.
Private Sub Workbook_Open()
Range("A1").End(xlDown).Select
Selection.Copy
Range("L1").Select
ActiveSheet.Paste
Range("A1").Select
Application.CutCopyMode = False
UserForm.Show
End Sub
This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.
View 6 Replies
View Related
Jul 11, 2007
On one sheet (KPI) I have either the values "x" or "" in the range A84:A89 to mark wheter to use the corresponding project in the range B84:B89. On the sheet X-ref I have the same project names in range T4:Y4 and a corresponding target value in T8:Y8
What I want is the sum (or average) of the marked-projects target-values. The result should end up in KPI!G31.
In other words I want
=sumif(A84:A89;"x";'X-ref'!T4:Y4)
but it doesn't work since the first range is an column-array and the second range is an row-array.
View 5 Replies
View Related
Nov 15, 2013
I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
View 5 Replies
View Related
Aug 30, 2013
search column "E" for a specific text value (let's say "it"). When found, copy the value in column "A" for the corresponding row where "it" was found to another cell "F2". When copying to cell "F2", if a value already exists in cell "F2", then no nothing else copy the value. If no "it" was found in the column, do nothing. I will continue to search, but since I am new to VBA it takes me a bit to find what I specifically need.
View 1 Replies
View Related
Jan 26, 2010
Sub Printstuff()
Application.ScreenUpdating = False
For Each cell In Range("V168:V246")
If cell.Value = "YES" Then
'enter the name that is in The A (of the row with Yes) column in A2
'Run Sub Individual
'Print
'Run Sub View All
End If
'Next "Yes"
End Sub
View 9 Replies
View Related
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Jan 13, 2014
I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab
001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
I think that I have explained what I need to do
View 8 Replies
View Related
Oct 8, 2012
I wanted to copy the cell value of column C to column B how should i do it in macro. result in Sheet2.
View 8 Replies
View Related
Oct 12, 2009
I am really desperate about this. I have a column of which I only want every 9th cell value listed seperately one below the other in a seperate column.
I tried defining the first two cells of the new column (e.g. first cell input is =B1 and second one is =B10, third one would be =B19 and so on...) and using the usual pull down.
In short: I want to copy values from A1,A10,A19,A28...(always +9) into B1 (from A1), B2 (from
PS: I have access to the 2008 Mac OSX version as well as to the 2007 Windows version!!!
View 6 Replies
View Related
Feb 6, 2014
I’m trying to write a macro to look down two different columns in my work sheet and if the is a value >0 then copy a set range of cells to another sheet,
I need to search column (k) and (x) range (“K2 : K147”) and (“X2 : X147”) in (sheet1) for values >0 if there is, then copy from (“f : m”) if it is found in the (k) column, or copy from (“s : z”) if it is found in the (X) column, and paste value only to the next empty cell in sheet2 . Sheet2 is empty so (A) on down is fine for paste range. There is a spin button in the copy range column (L) and I don’t want that picked up in the copy. Manually I (paste text) only but I think (values only) will do the same thing.
[Code] .........
View 14 Replies
View Related
Mar 27, 2014
Is there way I can copy the BOTTOM cell amount in a specific column, to another specific cell in another workbook?
I update a worksheet with a new row of data each day. I want to copy only the last (bottom) entry from one column over to a worksheet in another workbook. I'm hoping I can just put something in the cell I want to copy to, to reference the bottom cell with data I'm copying from.
View 2 Replies
View Related
Dec 10, 2006
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies
View Related
Jan 30, 2007
I need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies
View Related
Jun 7, 2014
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
View 2 Replies
View Related
Nov 15, 2007
=CORREL(C1:C10,C12:C21) at H1
=CORREL(C1:C10,C23:C32) at H2
=CORREL(C1:C10,C34:C43) at H3
etc
can i have a macro that first array remain the same, and second array always 11 cells added. drag it down also can
View 9 Replies
View Related
Jul 22, 2014
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
View 2 Replies
View Related
Sep 22, 2009
Looking to find a way to take the value of one cell and copy it to a column starting from IK5 to the end of column the amount of row will always be different. So if I type "need to call" in cell F1 and I would like to have a macro button to copy this to column IK cell 5 and on to the end of the data. Here is what I have so far.
View 3 Replies
View Related
Dec 29, 2012
I have about 50,000 rows of data spanning over various numbers of columns.
Here is some dummy data
Sheet1 ABCDEFGHIJKLMNOP141233434 7 285673678899 6 3645678434678643 4
macro to copy the 5th last value in each row to column A. Note the 2nd last cell in always blank.
View 7 Replies
View Related
Dec 28, 2006
Suppose I am receiving date in cell A1 form external source on each time I refresh, each time the data that comes in Cell A1 is different based on the source sending this data to me. I want to register whatever come in cell A1 in b1, b2, b3 so on.
View 2 Replies
View Related
Dec 16, 2013
I have an array 20 Rows x 42 Columns, which contains a competition draw.
I need to search this array for a unique value and return whatever the time is in the first column on the same row as the value appears, and enter it into column C in the Womens Times sheet.
I also want to return into column D the court number from row 3.
The reason i want this automated is as teams enter / withdraw we may need to drag the games from court to court to fill gaps, so i want the Womens Times sheet to update accordingly.
I have been messing around with index and match, but cannot quite get it to return what i need.
I have attached an example ... on the sheet "Womens Times" in column A there is a list of game numbers ( #1W etc etc) indicating womens game #1 and so on. The main sheet i am using also has a seperate tab for the mens games, hence the designator of W or M on the end of the game number.
View 2 Replies
View Related
Oct 16, 2007
I need to copy Invoice id from Column B to Column A, firstly it would be to the cell one down and one across, ie data from B3 is copied to A4. I then need to continue to copy this data down in column A but only while there is a date in column B.
View 7 Replies
View Related
Nov 26, 2007
I have a workbook that I have set up some VBA code so that when it opens I have a box ask, "View Data" or "Start New Audit." When the user clicks "Start New Audit" Excel creates a new sheet, names it based on the current date (in yyyymmdd format), and copies a range from a sheet called "Master Sheet" to this new sheet. These new sheets are for users to input data on a daily basis. As that data is typed in, there are four different columns that have an average function at the bottom. I need the result of that average function to be sent to another pre-existing sheet on the next empty row so that I can create a chart out of it.
View 4 Replies
View Related
Feb 24, 2012
I'm creating a POS system for my wife's business. The workbook has three sheets.
On the first sheet are all the articles that her shop sells.
On A1 to D1 is the following text:
Quantity Discription Price Totalprice
B1 to D1 is already filled in. When a customer buys something, a employee only has to fill in A1, how many of what item the customer buys.
So it is possible that only 5 items have a number filled in, in A1.
Now, i have a vba, which has to search all the items which have filled in quantity and then copy row A to D to a sheet called Receipt. (Later I want to print this receipt)
Now this vba work when all the filled in cells are above each other. When there is a gap between the cells, it only copies the first row.
Here is the VBA:
Sub test()
Dim r As Range, c As Range
With Worksheets("Kassa")
Set r = Range(.Range("A1"), .Range("A1").End(xlDown))
For Each c In r
If WorksheetFunction.IsNumber(c) Then
Range(.Cells(c.Row, "A"), .Cells(c.Row, "D")).Copy
[Code] ........
When I change the second A1 in the fourth line to A200. I works, but is extremely slow. It's almost like if Excel is responding anymore. Also, when no quantities are filled in, it's also slow.
View 2 Replies
View Related
Sep 9, 2013
I'm having a hard time understanding the Find function and getting the syntax correct. For the example below I need an entire function that will look up the most previous value of 'Incident_Number, and copy the corresponding 'Description' into the last record.
My spreadsheet has an Excel Table with column A titled 'Incident_Number' (a Number) and column B is 'Description' (a String). Incident_Number may contain cells with duplicate entries, but in each case, there will be a corresponding 'Description'. I already have a macro that creates a new record for either 1) a New Incident, or 2) an existing Incident. If I'm creating a new record for an existing Incident, what I need to be able to do is auto populate 'Description' with the value in the previous record that has the same Incident_Number.
In the example, the macro should copy "The battery was replaced" from the most previous record whose incident number is 1001 into the new record.
Incident_Number Description
1001 The battery is dead
1002 No power at the console
1003 System crashed
1001 The battery was replaced
1004 something else
1001 ?? (should read, "The Battery was replaced"
View 2 Replies
View Related
Jun 27, 2014
I'm trying to find the last column of my table that will change from week to week and copy the contents of that cell and the one beneath it and paste them into the two cells to the right of them.
Here's what I've tried:
Sheets("LY - TY Chart - Tot. Sell $").Select
Dim lastTableColLY As Long
Dim lastTableColTY As Long
Dim nextTableColLY As Long
Dim nextTableColTY As Long
lastTableColLY = Cells(109, Columns.Count).End(xlToLeft).Column
lastTableColTY = Cells(110, Columns.Count).End(xlToLeft).Column
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
Range.Cells(nextTableColLY).Select.Paste
I'm getting the following error:
Compile error: Argument not optional at the
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
View 2 Replies
View Related
