I have the following array formula written in cell E2 of my worksheet. Column A is filled by copying a list of names from another sheet, list starts in A2. This list is dynamic and I am trying to find the correct code to copy the array formula down Column E as far as the length of the list of names in Column A.
Note that the formula presently works as far as row 200 but I also need the macro to write the formula so that $A$200 and $D$200 also changes to suit the number of rows filled in column A.
I have an array formula that I want to apply to all the cells in a column with the exception of the = variable. Haven't been able to do anything but get it in the same relation ie.
{=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C7,'CO Angler Data'!R7:R106,0))} becomes {=SUM(IF('CO Angler Data'!K39:K138='CO Am Data'!C39,'CO Angler Data'!R39:R138,0))} in column 39 when I want it to be {=SUM(IF('CO Angler Data'!K7:K106='CO Am Data'!C39,'CO Angler Data'!R7:R106,0))}.
Can I do this easily or do I have to do it manually like I have been?
and am copying it to other cells using this Sub copyformula() With Sheets("Sheet2") .Range("B3:B5000").Formula = .Range("B3").Formula End With End Sub It does the copy but removes the { and } thus rendering the formula useless to me. How can I accomplish this task and keep the formula as an array formula?
I tried to drag the formula down and recorded it as a macro but when it runs it takes far to long.
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
Code: Sub populate() Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
Trying to use a standard formula based on a variable workbook name. The INDIRECT solution suggested worked fine until I realised that I'd need to have the additional workbooks open in order to return the results.
Variable Workbook name in formula?
The reason I wanted to use a standard formula was so that I could use a piece of code I've written that would simply copy the formula from one cell and paste it accross and down for all cells within a range of rows and columns. Seeing as the formula now needs to be unique per column I need to change the code to copy the entire row of formula down instead of the one formula down and across. Here's my original code that copies a formula from B2 and pastes it down to the last row and across to the last column:
Code: Sub CopyFormulaDown()
Dim lngLastrow As Long Dim rngTargetStart As Range Dim rngTargetEnd As Range
What I assume I need is to change the Range("B2") in the last line to Range("B2:???"), where ??? is the last column eg AA2. I'm not sure how to do this dynamically though.
I need some come code for a macro to copy a formula down a set of cells (I want to highlight a set of cells then run macro). I've looked all over the web, and the ones that looked right didn't work. I'm afraid I don't have enough experience yet to edit them.
In detail: Have cells b2 down list the price of an item Have C down list item price plus VAT Create a formula in C2 (ie =(b2/100)*117.5 Copy C2 to all rows with a value > 0 Create a macro where I highlight cells to apply this macro to
This is all in aid of an interview tomorrow, so if I'm lucky, I can spend more time afterwards learning this stuff. I get the principles, just don't know the language enough yet.
I am using column K and it looks up the length of this cell. When I created the formula I was using info that only went to line 234 which was fine. Once I clear the info in column K and input new info it can go further than line 234. How do I get the macro to look up the whole of column k without having to create a new macro each time?
I want text that's in bold in column B in sheet 1 of my spreadsheet to copy over into column A in sheet 2 of my spreadsheet - is there a quick way of doing this using code or a formula?
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it in writing so that i accurately describe my problem. attached is my example
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
Months ago I ever posted the following code on Mr. Excel forum but did not get satisfied solutions. Right now slightly changed the code and post here.
I have the following code running on Excel 2000 for many years. Now I just switched to Excel 2003 version and found the code does not work well: It refused to do replace function. Does Excel 2003 version need some additional consideration?
Sub SSRe() Dim CommVolArray As Variant Dim CommAssArray As Variant Dim MyWorkbook As Workbook
I need this for VB code, for an array that is the product of another macro hence it's dynamic.
B 3 E 2 E 8 D 2 B 1 B 7 How do I subtotal Col A,B according to Col A? Total 3 B entries with a subtotal of 11 Total 2 E entries with a subtotal of 10 Total 1 D entry with a subtotal of 2
I have been trying to take a variant array that has 6 columns, output it to a new worksheet (although I would prefer to just sort the array but can't get that working - how I can do this please feel free), sort the worksheet by 2 different columns, and then move these values back into the original array. I think I have the dumping and sorting down but I can't figure out the putting back into the array part. Here is the code I have thus far. varRecords is the array I am dumping to the new worksheet.
I am trying to find an item within an array and then VBA could execute code.
Here is an example:
[Code]....
LookupItems =("text", "value", "book") or should I acutally be using Split("text,value,book",",")
For Each sht in ThisWorkbook If sht.name = array(LookupItems) Then.....execute code
[Code] ....
So basically in this example I want to loop through all the sheet names in the workbook and if any of the names in the arrary are found it will execute the code for those particular sheet names.
I know alternatives are the select case or write an if statement for each value I am looking up or even use an OR for each value to lookup; but I just wanted to see if this method was even possible as it would be less coding.
I have an array and I need to be able to detect when a varying number of consecutive array elements are equal. I want to be able to call the code and give the number of elements I need to find.
The following does not work but illustrate what I am looking for.
[Code] .....
I have been looking at ways of recording the number of equalities in the p loop, but I am sure there is a more elegant way.
I have created an array in Excel VBA 2003 and successfully loaded it with values. The array variable is called "Week". I am currently getting the sum of the numbers in the array by creating a dim variable that adds them statically one at a time:
Dim finalvalue As Integer finalvalue = week(1) + week(2) + week(3)
That works, except as time goes on there are more weeks and I need to dynamically add all the values together in one fell swoop.
I'm writing a macro that will pull a set of dates from a worksheet and put them into an array. Then I want to find the max date in the array (most likely using some sort of sorting method).
The code below is how I'm putting the dates into an array. I'm not sure if using the date data type is best. I can't tell how it will sort the information. Is there an easy way to find the maximum of an array of dates?
Dim Date_Array() As Date If Sheets("Sheet1"). Range("N" & i) = "Date" Then j = j + 1 Redim Preserve Date_Array(j)
Basically, I'm trying to alter the code by inserting another condition where if S12 = R than it will exclude the value found in D12, other wise D12 is included. It was initally setup with a range of $C12:$H12 but i had to write it out long to exclude $D12
I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.
Code: Sub ClearAndReset() Dim WS1 As Worksheet Set WS1 = ActiveWorkbook.Worksheets("Stocks") WS1.Unprotect Application.EnableEvents = False With WS1