I have a workbook event where the macro inserts the username and date into the comments of the cell that has been edited.. However I would like it to exclude the 'Index' worksheet that has its own macro for indexing all the sheets in the workbook. As every time the sheet is clicked and the macro updates the sheet names all the cells comment.
View 2 Replies
I have a macro code (attached below) which i am using to do some conditional formatting for all my worksheets in a workbook. I would like this macro to skip 1st 2 sheets in this workbook.
Can some1 kindly edit my following code so that macro does not runs on 1st 2 sheets namely "Sheet1" & "Sheet2" and continue running for all remaining.
I have 2 excel sheets with records of email addresses. Excel Sheet A , Excel Sheet B.
I want to exclude the email addresses of Excel Sheet B from Excel Sheet A (if there are similar records I want to remove them from excel sheet A)how to do this?
I've setup a macro button to sort some stockpile items from A-Z so entering quantity on hand can be done more easily. Each cell is a drop-down selection so at various times, there can be different stockpile items in the list, thus why, I setup a macro to quickly sort the list.
However, I've got some text (Select Stockpile Item) that I wish not to be included in the A-Z sort as this might put items starting with T or later at the end of the sort.
Sub SortMySpecialStockpileA2Z()
If MsgBox("Are you sure?", vbYesNo + vbQuestion) = vbNo Then
Exit Sub
Else
Range("K4:L110").Select
ActiveWorkbook.Worksheets("MyStockpile").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("MyStockpile").Sort.SortFields.Add Key:=Range("K4") _
, SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
With ActiveWorkbook.Worksheets("MyStockpile").Sort
.SetRange Range("K4:L110")
.Header = xlNo
.MatchCase = False
.Orientation = xlTopToBottom
.SortMethod = xlPinYin
.Apply
End With
End If
End Sub
I have a sheet for addresses (Column 1 = Name, Column 2 = Address line 1, Column 3 = City, Column 4 = Postcode) and I run a macro that Filters that data based on the the city to different Tabs. This works fine except that sometimes, once the data is filtered I will find one or two addresses on my new filtered sheets that I really wanted to exclude. As my main address Tab information changes regularly, Ideally, I would like to see the Item on the City filtersheet, Double click it, and this would have the effect of deleting it from the City filtersheet but also copying it to an "Exclusions" Sheet which I could use before I run my normal filter macro to filter out these bad addresses.
View 9 Replies View Relatedis there a formula to exclude #div/0! from a max value. say you have a column with a few #div/0! is there any way for the max not to be #div/0!
View 12 Replies View RelatedI would like to exclude certain rows from
For r = 1 to 1000
does anyone know how i might go about this?
I use currentRegion to add the item to the combobox, but i don't know how to add without including the first cell in the range,as usually, it is the field name.
View 5 Replies View RelatedFor example the formula below is in cell AU6. I want to exclude A6 from the array. Row AU7 would need to exclude A7 when I drag it down.
=MAX(IF($A$6:$A$493=AT6,$AS$6:$AS$493))
I have this calculation which works fine if all cells have a value. But it will happen that cells in the range are empty.
=SUMPRODUCT(--(1*LEFT('Courses input'!C4:D6,1)-C3<=0), --(1*MID('Courses input'!C4:D6,3,1)>=2))/E3
What can i do to exclude empty cells in the range from calculation?
I want to conditionally format the highest and lowest number in a range of numbers in a single column (Column C). The numbers in Column C are created by a formula that simply adds the data in the two cells in the same row of Columns A & B.
Numbers are entered into columns A & B daily. The column C formula has been filled into enough rows to complete the entire year. Since future days do not have numbers filled in for Columns A & B, Column C for those days results in a sum of 0.
I have set up conditional formatting for Column C so the cell of the highest number in filled in green. I want to conditionally format Column C so the cell with the lowest number is filled red, but it automatically fills all the cells for future days in Column C in red because the sum displayed there is 0.
Is there a way to exclude the 0 sum cells? The date is filled in as simple text, rather than formatted as a day. Is that the answer?
I have data that I calculate by month and at the bottom I calculate a weighted average. However, I want to exclude the last two months (data points) because they are not mature.
So every month when I update the spreadsheet, it would be the two newest data points to exclude.
Regarding the 0 value excluding. I use the below mentioned code to sum and paste that data which are meet the date criteria:
[Code] ..........
So my question is that how should I change the code the 0 value will be excluded from the result list.
I have the following code which toggles the value of cells by double clicking on them. I need to exclude certain ranges of cells though. I tried password protecting the sheet, but that haults the code. Is there a way to exclude the cells or exit sub if the targeted cell was in the range of Rows("10:10") or Columns("A:B") for example?
View 2 Replies View RelatedI've got data for different regions of our company. For this example, what I need to do is count the number of jobs in the "South Atlantic" region (Column T) that are NOT "Wal-Mart Stores, Inc" jobs. In order to do this, I put a "1" in Column F so that the formula would have something to sum:
=SUMPRODUCT(--(T2:T1079="SOUTH ATLANTIC"),--(H2:H1079<>"WAL-MART STORES, INC"),(F2:F1079))
The problem is that some job numbers, which are located in Column G, are duplicated. As a result, this number is higher than it should be.
So what I need to do is only count each job number once. How do I do that? Is there a way to modify the existing formula? Or do I need something completely different?
can i sort a table and exclude the first row from sorting
View 9 Replies View RelatedI have a list of weeks 1-4 for the fiscal month of January. I have a total column. Each week the appropriate week is updated and the total is updated via formula. The total column is just formulas adding Weeks 1-4 up. I also have an average column with the AVERAGE formula beside the total it that should give me the weekly average for January. However, it's trying to average all the weeks instead of just the weeks that I am on.
For example, Week 1 is 1,000,000. Week 2 is 500,000. Week 3 & 4 are 0 because there is no data in there yet. The AVERAGE formula keeps showing 375,000 instead of 750,000. It's averaging all the weeks and I just want it to average Weeks 1 & 2 right now, but automatically average Weeks 3 & 4 when they are populated.
I would like to know how to set the formula to exclude duplicated value under "Countif" function.
My case is:
Section Supplier No.
D-19999
D-19999
D-1PH59
D-1PH59
D-2PW13
D-2PW34
D-2PW14
D-2PW14
D-2PW14
D-2PW14
D-2PW14
My expected result:
D1 = 2
D2 = 3
I'm running a query of 30 and 60 days worth of data but I don't want certain dates to be included in the queries. How do I exclude certain dates and at the same time pull in day 31 to include this in my 30 day high or average etc.?
For example:
1/19/2007 4.7
1/18/2007 4.5
1/17/2007 3.8
1/16/2007 4.9
1/15/2007 3.75
1/12/2007 3.75
I want to exclude 1/15 because it is a holiday and it just repeats the data from 1/12. So I want it to pull in the data for 1/12 if I were doing a 5 day query. As I said before I need to do a MAX, MIN, AVERAGE and STDEV of 30 and 60 days but my formulas are skewed because of the holidays.
I need to have an inputbox for users to enter multiple store numbers. What I need to do is actually filter out the store numbers that was entered into the inputbox
my code so far is:
'Inputbox to filter out new stores
Newstore = InputBox("Enter New Store Numbers seperated by a space", "Enter New Stores", "119 120")
x = Split(Newstore, " ")
For i = 0 To UBound(x)
Range("A1").CurrentRegion.AutoFilter Field:=2, Criteria1:=Array(x) _
, Operator:=xlFilterValues
Next i
=IF($M272="DUPLICATES";SUMIF($D:$D;$D272;F:F);"") and
=IF($M272="DUPLICATES";SUMIF($D:$D;$D272;G:G);"")
it looks up duplicate values in D:D
well It considers #s to be duplicate too and then makes the summation
How can I exclude symbols like that # from the sum???
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedHow do I adjust this formula so it copies & paste special values rather than copying formatting etc? I am very new to this and I have looked at other examples but have found it hard to adjust my code using those examples.
VB:
Sub PrepayjournalKW()
'
' PrepayjournalKW Macro
'
Range("A6", Range("A" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("A1")
Range("B6", Range("B" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("C1")
Range("AB6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("D1")
Range("AF6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("E1")
End Sub
how to exclude hidden row from pivot table.
E.g After i filter my data, i have 50 data which will not include into my data analysis. However, after set up pivot table, these 50 data still include into my counting from my pivot table. How to exclude?
I am trying to create a schedule that includes weekdays only. Is there a formula or set-up step to do that?
Currently I have 3 columns:
Start date Action date Finish date
The Action date column has the formula: that cell (say C4) minus number of days that action requires (say 10), but when 10 days fall on a weekend, I need to change to the next work day instead.
I am trying to exclude unusable data from my analysis. I have flagged data in the flag column on sheet 1 by a "1". A "0" is good data. On sheet 2, I have counts for the amounts of a certain code per partner. I used a sumproduct formula for the counts, but now I want to exclude all data with a flag "1".
View 4 Replies View RelatedIs there a way to do a Formula (SUM) but exclude cells with invalid values? I would like to add up all values in attached spreadsheet for cells A14 to A28 and again for A49 to A63, as well as get an average C-14 to 28 and again for C49-63.
As some of the cells contain text rather than numbers, the formula doesn't work. how to exclude these cells?
I've used the sumproduct formula very sucessfully in a workbook. The workbook is used to monitor discrepancies routed to other departments. Column U has the status of the discrepancy (Open, Closed, Cancelled etc). The below formula returns the number of discrepancies raised to a particular department. Now I need to tweak the formula to exclude values "Cancelled" found in range $U$119:$U:417.
=SUMPRODUCT(--(Register!$I$119:$I$417=$A4),--(Register!$C$119:$C$417=B$2),--(Register!$B$119:$B$417))
I have been asked to create a worksheet to calculate the percentage of the utilisation of a number of loan cars per month. Each of the cars may be used on each and every day of the week but the percentage utilisation is to be calculated on working days only. However it is essential to record the name of the driver of the car at weekends and holidays. Column A is populated with the dates of the month. Colum B is populated with the relative days of the week. In column C and subsequent columns I record the name of the driver of a particular car registration. Is there any way that I can count the number of drivers of each car on working days only and not weekends or bank holidays?
View 5 Replies View RelatedIs there a good way of excluding an outlier in an average calculation. In the example below will I exclude 1000 from the average-calculation.
The way to decide excluding-values can either be a percent based on the range or everything that is a higher than a user defined value. It can also be more than one outlier.
A user defined function is OK with me, if it is impossible to use the built-in functions.
