I have data that I calculate by month and at the bottom I calculate a weighted average. However, I want to exclude the last two months (data points) because they are not mature.
So every month when I update the spreadsheet, it would be the two newest data points to exclude.
I am trying to automatically add up data, excluding that last two data points in a row. And every month add the next data point based on the date of the spreadsheet (top left). see trail below... This sting is going in circles.
View 14 Replies View RelatedI'm running a query of 30 and 60 days worth of data but I don't want certain dates to be included in the queries. How do I exclude certain dates and at the same time pull in day 31 to include this in my 30 day high or average etc.?
For example:
1/19/2007 4.7
1/18/2007 4.5
1/17/2007 3.8
1/16/2007 4.9
1/15/2007 3.75
1/12/2007 3.75
I want to exclude 1/15 because it is a holiday and it just repeats the data from 1/12. So I want it to pull in the data for 1/12 if I were doing a 5 day query. As I said before I need to do a MAX, MIN, AVERAGE and STDEV of 30 and 60 days but my formulas are skewed because of the holidays.
I need to have an inputbox for users to enter multiple store numbers. What I need to do is actually filter out the store numbers that was entered into the inputbox
my code so far is:
'Inputbox to filter out new stores
Newstore = InputBox("Enter New Store Numbers seperated by a space", "Enter New Stores", "119 120")
x = Split(Newstore, " ")
For i = 0 To UBound(x)
Range("A1").CurrentRegion.AutoFilter Field:=2, Criteria1:=Array(x) _
, Operator:=xlFilterValues
Next i
I am trying to exclude unusable data from my analysis. I have flagged data in the flag column on sheet 1 by a "1". A "0" is good data. On sheet 2, I have counts for the amounts of a certain code per partner. I used a sumproduct formula for the counts, but now I want to exclude all data with a flag "1".
View 4 Replies View RelatedI have a column that contains combined data of numbers and letters. I want to filter that column to exclude cells that contain the letter "d" or "f". I am trying to create a pivot table from the results of the filter to only display the ID #s that do not contain the letters "f" or "d".
The data inside the fields is not the same length and is not listed in a particular order. I have over 14,000 records I need to filter.
Data set example: The items in red are an example of the cells I would like to exclude from my worksheet. Is there a way to filter without deleting the data?
445-0706634F946
5886-K949-D001
445-0716622F946
445-0706634F887
497-0480473
445-9995967F025
6569-9788-2342
9016-1300
9016-C765-875
123-S765-87645
I have a sheet for addresses (Column 1 = Name, Column 2 = Address line 1, Column 3 = City, Column 4 = Postcode) and I run a macro that Filters that data based on the the city to different Tabs. This works fine except that sometimes, once the data is filtered I will find one or two addresses on my new filtered sheets that I really wanted to exclude. As my main address Tab information changes regularly, Ideally, I would like to see the Item on the City filtersheet, Double click it, and this would have the effect of deleting it from the City filtersheet but also copying it to an "Exclusions" Sheet which I could use before I run my normal filter macro to filter out these bad addresses.
View 9 Replies View RelatedI use a SQL query to export a subset of data from our server. After manipulating the received data I need to Average one column that has been sorted into a number of blocks consisting of variable numbers of rows and post the result to the ajacent cell. I have tried the Countif worksheet function but am unable to resove the syntax problem.
Sub SumBlock()
Dim First_Row As Long
Dim Last_Row As Long
Dim iTotalRows As Long
Dim iCount As Long
iTotalRows = Range("A65536").End(xlUp).Row
First_Row = 2
Do While Last_Row < iTotalRows - 1
Last_Row = ActiveSheet.Range("j" & First_Row).End(xlDown).Row
iCount = Application.WorksheetFunction.CountIf(Range("J" & First_Row), ("J " & Last_Row), ">0")
ActiveSheet.Range("K" & Last_Row + 1).Formula = "=Sum(J" & First_Row & ":J" & Last_Row & ")/iCount"
First_Row = Last_Row + 2
Loop
End Sub
I'm trying to set up a diet/training spreadsheet so that when a client enters foods and exercises they don't want/can't do, those foods and exercises are made unavailable in dropdown menus (on my programming sheet) so that I can't inadvertently put them into their plans. I have a webform they fill out, which automatically puts the data into a spreadsheet and I know how to pull data from there into the clients' workbooks...
View 2 Replies View RelatedI am using Excel 07 with Vista, and creating a spreadsheet in which users will be inputting a record into every row.
There is a row that requires a number to be entered, where some of the numbers will begin with 0 or 00 or even 0000. I want to make sure no-one incorrectly enters a letter, however with data validation set to whole numbers, it formats the cell to change an entry of "005667" into just "5667". There is no set length for the field.
The only way to have "005667" is the change the column to text, but then obviously that defeats the whole purpose!
is there a formula to exclude #div/0! from a max value. say you have a column with a few #div/0! is there any way for the max not to be #div/0!
View 12 Replies View RelatedI would like to exclude certain rows from
For r = 1 to 1000
does anyone know how i might go about this?
I use currentRegion to add the item to the combobox, but i don't know how to add without including the first cell in the range,as usually, it is the field name.
View 5 Replies View RelatedFor example the formula below is in cell AU6. I want to exclude A6 from the array. Row AU7 would need to exclude A7 when I drag it down.
=MAX(IF($A$6:$A$493=AT6,$AS$6:$AS$493))
I have this calculation which works fine if all cells have a value. But it will happen that cells in the range are empty.
=SUMPRODUCT(--(1*LEFT('Courses input'!C4:D6,1)-C3<=0), --(1*MID('Courses input'!C4:D6,3,1)>=2))/E3
What can i do to exclude empty cells in the range from calculation?
I want to conditionally format the highest and lowest number in a range of numbers in a single column (Column C). The numbers in Column C are created by a formula that simply adds the data in the two cells in the same row of Columns A & B.
Numbers are entered into columns A & B daily. The column C formula has been filled into enough rows to complete the entire year. Since future days do not have numbers filled in for Columns A & B, Column C for those days results in a sum of 0.
I have set up conditional formatting for Column C so the cell of the highest number in filled in green. I want to conditionally format Column C so the cell with the lowest number is filled red, but it automatically fills all the cells for future days in Column C in red because the sum displayed there is 0.
Is there a way to exclude the 0 sum cells? The date is filled in as simple text, rather than formatted as a day. Is that the answer?
I have 2 excel sheets with records of email addresses. Excel Sheet A , Excel Sheet B.
I want to exclude the email addresses of Excel Sheet B from Excel Sheet A (if there are similar records I want to remove them from excel sheet A)how to do this?
Regarding the 0 value excluding. I use the below mentioned code to sum and paste that data which are meet the date criteria:
[Code] ..........
So my question is that how should I change the code the 0 value will be excluded from the result list.
I have a macro code (attached below) which i am using to do some conditional formatting for all my worksheets in a workbook. I would like this macro to skip 1st 2 sheets in this workbook.
Can some1 kindly edit my following code so that macro does not runs on 1st 2 sheets namely "Sheet1" & "Sheet2" and continue running for all remaining.
I have a workbook event where the macro inserts the username and date into the comments of the cell that has been edited.. However I would like it to exclude the 'Index' worksheet that has its own macro for indexing all the sheets in the workbook. As every time the sheet is clicked and the macro updates the sheet names all the cells comment.
View 2 Replies View RelatedI have the following code which toggles the value of cells by double clicking on them. I need to exclude certain ranges of cells though. I tried password protecting the sheet, but that haults the code. Is there a way to exclude the cells or exit sub if the targeted cell was in the range of Rows("10:10") or Columns("A:B") for example?
View 2 Replies View RelatedI've got data for different regions of our company. For this example, what I need to do is count the number of jobs in the "South Atlantic" region (Column T) that are NOT "Wal-Mart Stores, Inc" jobs. In order to do this, I put a "1" in Column F so that the formula would have something to sum:
=SUMPRODUCT(--(T2:T1079="SOUTH ATLANTIC"),--(H2:H1079<>"WAL-MART STORES, INC"),(F2:F1079))
The problem is that some job numbers, which are located in Column G, are duplicated. As a result, this number is higher than it should be.
So what I need to do is only count each job number once. How do I do that? Is there a way to modify the existing formula? Or do I need something completely different?
can i sort a table and exclude the first row from sorting
View 9 Replies View RelatedI have a list of weeks 1-4 for the fiscal month of January. I have a total column. Each week the appropriate week is updated and the total is updated via formula. The total column is just formulas adding Weeks 1-4 up. I also have an average column with the AVERAGE formula beside the total it that should give me the weekly average for January. However, it's trying to average all the weeks instead of just the weeks that I am on.
For example, Week 1 is 1,000,000. Week 2 is 500,000. Week 3 & 4 are 0 because there is no data in there yet. The AVERAGE formula keeps showing 375,000 instead of 750,000. It's averaging all the weeks and I just want it to average Weeks 1 & 2 right now, but automatically average Weeks 3 & 4 when they are populated.
I would like to know how to set the formula to exclude duplicated value under "Countif" function.
My case is:
Section Supplier No.
D-19999
D-19999
D-1PH59
D-1PH59
D-2PW13
D-2PW34
D-2PW14
D-2PW14
D-2PW14
D-2PW14
D-2PW14
My expected result:
D1 = 2
D2 = 3
=IF($M272="DUPLICATES";SUMIF($D:$D;$D272;F:F);"") and
=IF($M272="DUPLICATES";SUMIF($D:$D;$D272;G:G);"")
it looks up duplicate values in D:D
well It considers #s to be duplicate too and then makes the summation
How can I exclude symbols like that # from the sum???
How do I adjust this formula so it copies & paste special values rather than copying formatting etc? I am very new to this and I have looked at other examples but have found it hard to adjust my code using those examples.
VB:
Sub PrepayjournalKW()
'
' PrepayjournalKW Macro
'
Range("A6", Range("A" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("A1")
Range("B6", Range("B" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("C1")
Range("AB6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("D1")
Range("AF6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("E1")
End Sub
how to exclude hidden row from pivot table.
E.g After i filter my data, i have 50 data which will not include into my data analysis. However, after set up pivot table, these 50 data still include into my counting from my pivot table. How to exclude?
I am trying to create a schedule that includes weekdays only. Is there a formula or set-up step to do that?
Currently I have 3 columns:
Start date Action date Finish date
The Action date column has the formula: that cell (say C4) minus number of days that action requires (say 10), but when 10 days fall on a weekend, I need to change to the next work day instead.
Is there a way to do a Formula (SUM) but exclude cells with invalid values? I would like to add up all values in attached spreadsheet for cells A14 to A28 and again for A49 to A63, as well as get an average C-14 to 28 and again for C49-63.
As some of the cells contain text rather than numbers, the formula doesn't work. how to exclude these cells?