Macro To Auto Filter And Then Paste Certain Columns To Another Sheet
Jun 11, 2014
I am running a auto filter macro to I need to change it to only copy column A:B and past in column C:D in the sheet called "Diary". How to change my current macro to only select column A:B and paste it. It is currently pasting the entire row.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I have 4 coloumns: Barcode, Date, Qty, Intials. The products will be scanned and the above cells will be populated via a VBA code. What the problem is that in the Barcode column - a product may be scanned on several different days, each entry may have a different Qty value. So how can I autofilter to show the various barcodes and get the total value of Qty (subtotal) and then transfer this value into a new sheet showing the relevant barcode and subtotal Qty?
Is it possible to enable autofilter even if the sheet is protected. i have protected certain columns in a sheet as it contains formula but i need to filter the values based on auto filter. This is not working as the sheet is protected. is there any way to enable auotfilter.
I have a summary sheet that pulls data from several worksheets. I have a filter on column I that hides all rows that have zero values in that column. Once I protect the sheet I cannot get the filter to update as the source data changes. I have tried other macros from forums but I cannot get them to work. I would like the filter to update every time that the workbook is calculated.
Sub Custom3() Range("A785:BW1455").AutoFilter Field:=2, Criteria1:="a" Range("A785:BW1455").AutoFilter Field:=3, Criteria2:Range ("N").value End Sub
Is Field 2 referring to Column B? So if I want to filter on the 9th row heading (going from left to right), my Field: = 9?
In the example above, the 1st criteria revolves filtering on dates with the goal of exceeding a certain date (i.e. > 1/1/08). Is there a way to reference the cell (which is in another workbook which is already open) in the criteria?
I'm trying to set up a macro to to run and control the AutoFilter in my Excel Spread Sheet. Essentially, all i want to be able to acheive is, instead of inputting the cryteria myself in the auto filter, i want the macro to select the cryteria from a specific cell.
Running the autofilter, normally you would select "equals or grater than" option and you would input a figure then click the "or" option then input "equals or less than" and a new figure and then click ok. This would sort the range; see the example macro...
Selection.AutoFilter Field:=10, Criteria1:=">=01/09/207", Operator:=xlOr _ , Criteria2:="<=31/09/2007" ActiveCell.Offset(774, -1).Range("A1").Select ActiveWindow.SmallScroll Down:=-15 End Sub
What i want to beable to do is to run a macro which will do the above but instead or requiring the user to input the range cryteria for the filter it would point to a cell to get the value from.
' test1 Macro ' Macro recorded 06/08/2007 by Nigel M Bailey ' Selection.AutoFilter Field:=10, Criteria1:="> Cell A2", Operator:=xlOr _ , Criteria2:="< Cell A3" ActiveCell.Offset(774, -1).Range("A1").Select ActiveWindow.SmallScroll Down:=-15 End Sub
In doing this i can validate the selection field and just add a search button which then will be perfect!
I have a Spreadsheet with names and other data, my question is, can i somehow Auto Filter the First name with a macro that I can assign to a button, what I would like to do is type the First Name in A1 and in B1 have a button that I can press and it will filter all with the name and other data on the same row I have typed in A1 will only be shown.
I have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10 Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1 2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults") 3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2 4. Repeat Step 2 . . . Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
i want to generate sheet automatically from existing sheet applying auto filter on specific column. i attached the sample which 3000 rows actually i have more than one lac rows so i have to put filter on sub_div column and then copy and paste to another sheet and give the name of sheet like F21. i want to do automatically this provide vba code or function for this
I have a excel file that was created by someone else 7 years ago - I still want the formulas that were created but I have updated the information on the spreadsheet and now the macro will not work
Sub DataSort01() ' ' DataSort01 Macro ' Macro recorded 11/18/00 by Terry Schiesser ' ' Keyboard Shortcut: Ctrl+t ' Selection.AutoFilter Selection.AutoFilter Field:=2, Criteria1:=">0", Operator:=xlAnd End Sub
when I do the ctrl+t it wants to debug I select the debug option and then it goes to the screen above but the "Selection.Autofilter" is highlighted.
I have the master data in sheet 1 with the some details of different stores eg store 1, store2, store3 etc which are in Column D.
I need to filter the data by each store and paste in the new sheet. If i use advance filter>copy to another location, the system is not allowing to select different sheet.
is ther any way that If I run the macro, the data is filterd by Store names and the same data should be pasted in a different sheet with the store name. that is all the data related to Store1 should be pasted in Store1 Sheet.
I have been modifying a workbook and the original macro will send to the sheet Results once the "Search" button is clicked, but I have found that this macro is displaying duplicate records. Can anyone help me put in an auto filter to find only unique records? My second workaround option is if someone can help me remove the go to/select sheet option from the "Search" macro so that a user will not automatically be sent to the Results tab and will instead hit the "Confirm Category Selection" button (which auto filters before sending the user to the Results tab).
I need a macro that simply allows me to open the filter criteria dialog to "contains," then stops, so I can enter the value to be filtered. Macro recorder does not allow me to stop recording at the point the "contains" dialog appears.
I have a working macro where I use a Forms Command Button w/ a Macro that copy/paste specific variables and range in the workbook to a pre-defined PowerPoint template file (in the same directory as the workbook file). See code below: Questions:
1) Is there a better script to reference a value in a cell value in Excel and Paste in PPT template?
2) Is there away to auto scale the copy range from Excel to PPt? Curently I have to manually adjust the height/width parameters.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I'm trying to get the data from Receipt log (sheet 1) to automatically populate into the Print Receipt (sheet 2) and to automatically filter and go to the Activity by account (sheet 3). I am so new to this and totally lost.
I've created an excel workbook to automatically create a report for my work. All you have to do is enter the data into the "DATA" worksheet. Easy. Only problem is that someone can easily ruin it if they try to run it when the "DATA" sheet is empty. I figure that if I can get two columns hide when it's empty and that would solve my problem. I've tried several VBA codes, but they don't work. Also, everything except the "DATA" sheet is protected to prevent accidently changes. This is the latest code I've tried:
VB: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "DATA!$P$5" And Target.Value = 0 Then ActiveSheet.Unprotect ("password")
I've been trying for some time now to figure out how to have one sheet automatically fill in another based on a larger data sheet. I'm trying to find a way to take a monthly calendar which contains a row for each employee and column for each day and use that to create smaller lists on another sheet. Basically if someone puts in for a day off, or has a medical appointment etc, that person has a coded single letter for that day for tracking and planning purposes. I want to have a second sheet that references those codes and makes individual lists (the following people are on vacation, these people have a medical appointment etc.)
A1 - Header - "Holidays in XXXX' B1 - Header - "Holidays in YYYY' C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column. C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.