I am currently using this code to place names in a combobox (active X). How can I use an array to perform each line to all 12 months without repeating the code over and over?Here is what I have:
Code:
Sub auto_Open()
Sheets("FEB").ComboBox1.List = Array("ALL", "ACT", "ROF", "MM")
Sheets("FEB").ComboBox2.List = Array("ACTvsROF_2", "ACTvsPLN_2", "ACTvsLY_2", "ROFvsMM_2", "ROFvsLM_2", [code].....
(Auto)Filter or a listbox somehow functioning like it?
Hi Excel guru's, i've got the following question:
Can I fine-tune the AutoFilter function so it filters more flexible? ....
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB:
Sub OpenWorkbooks()
Dim WorkbookOpen()
Dim WBnames() As String 'Array of WorkBooks to be Open
Dim WorkbookCnt As Integer
[Code] .....
I have 25 sheets in the workbook and a combobox on the main page, The combobox references a range of 1-25 that represents the 25 hidden pages. right now i can get the sheets to unhide one at a time based on the selection e.g. combobox option 1 will unhide sheet 1 but the sheet are representing sites in a design so i need to have the option to select multiple sites in the combobox option so for example if i select 5 then sheets 1-5 should unhide. I hope I've explained that clearly.
The other question or option would be to just duplicate sheet 1 based on the combobox selection e.g. selection 5 duplicates sheet 1 5 times.
I have a worksheet named, "Database2". There are hundreds of names in colum B starting in row 3 of this worksheet.
In the same Workbook is a worksheet named, "Records". I want to create a userform with a combo box, an "Enter" and "Cancel" command button. When typing begins in the combo box I need it to recognize the name from the "Database2" list in colum B and executes auto complete. When the "Enter" button is clicked I need it to enter the name in the first available row in colum B starting in row 3 in the Worksheet named "Records".
I m trying a Combobox array formula
Private Sub Combobox7_CLick()
ActiveSheet.UnProtect
With ComboBox7
Sheet1=Evaluate = INDEX {(D40:D249,MATCH (1,IF($A$40:$A$249=A3,IF($B$40:$B$249=B3,IF($C$40:$C$249=C3,IF($D$40:$D$249=D3,1)))),0))}
ActiveSheet.Protect
End Sub
I'm trying to create a data entry form that uses comboboxes. I can populate the comboboxes with data from an excell sheet. There are 3 columns of data that are called to each combobox, and the list of data is the same in each combobox. When the chosen line is selected for each combobox I then want to pass all that data back to the excel sheet in the same column layout. I suspect this will need to be done with an array.
Basically, I want to have five tasks with timing details that are done from Monday to Friday - these are listed in excel. I want each of these tasks to appear in each combo box (two columns in the combobox) so that the user can decide which task will be done on which day. Then the tasks are passed back to excel as a timetable. If it were 1 column I could do it but the second column is causing me grief. I suspect this will need to be done with an array.
How to open or Print a doc or pdf file from a combobox on a userForm
I have a folder full of doc files. I used a userform on which i put a combobox which contains those files' names and a cmd to open the file.
I managed to copy all the files names to the WorkSheet and listed them in the combobox.
@@@ I need a VBA code to do the following :
1- looking for the file name which matches the one i choose from the combobox
2- if there is a match, show " match" on a lable.
3- when i click the "open" cmd i created on the userform, it opens the file. or even print it and close it
4- prepare for another match.
Ive got 12 sheets, one for each month, and I've got a combobox in each sheet, and Ive got a macro for each combobox, that makes it jump to the correct sheet number. The problem is that when I try to populate the comboboxes under the workbook_open() sub, it doesnt work.
Tried
Code:
Private Sub workbook_open()
ComboMaaned.List = Array("Januar", "Februar", "Mars", "April", "Mai", "Juni", "Juli", "August", _
"September", "Oktober", "November", "Desember")
End Sub
tried with
Code:
Sheets("Sheet1").select
and
Code:
Sheets("Sheet1").ComboMaaned.list = Array ...
Seems to crash every time.
I have a VBA form and on form initialize I want to populate a combo box… My array to populate it with could be a massive list so I need to set my array before it populates
I have this code so far but I need my array to be from A5 to the last row in sheet 1
I know how to set an exact range but not one that changes.
VB:
Dim myArray As Variant
myArray =
With Me.ComboBox1
.List = myArray
End With
Here is a sample of the data I need to populate in the combobox.
client_ref
A0008
A024
AA005
AA009
[Code] ....
I can set up a 2 dimensional array by using
array = Workbooks("Workbook.xls").Worksheets("Data"). Range("D_all")
as range D-all contains 2 columns and 20 rows
I can send that list to a combo box by using
Me.ComboBox1.List() = array
If I have ColumnCount set to 2 then both columns will be listed
If I have ColumnCount set to 1 then the 1st part of the array will be listed
But how do I list just the 2nd part of the array
Having a problem with ComboBox on spreadsheet, not Userform. When the Sheet1 is first opened the ComboBox is not populated, if I click on Sheet2 and then Sheet1 ComboBox is populated and works fine. It appears that I need some additional coding.
View 3 Replies View RelatedI have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies View RelatedI need to populate combo boxes from a list of data on a separate workbook. I set everything up then found out the way I did it the seperate workbook must be opened before the drop downs are populated with the information. Is there a way to not have the linked workbook open?
Also these workbooks are all contained in their own file that must be duplicated on to other machines and into other larger files. I need that linked information to always follow the workbook contained in the same file. Another words if I have the original file "A" and duplicate it and now have a file "B" I want the combo box in file B to be linked to the workbook in file B.
I have been searching for hours trying to find a solution to no avail. What I need to do is make sure that when I press a button on a form, the value in a combo-box should be populated as "text format" not as a number. The reason for this is that when my numbers start with a 0, the leading zero gets dropped and I can't run the rest of my code as the items don't match...
I have tried substituting the "Value" to "text" in : Me.cboItem.value and have tried for hours trying to name dim variables as a String and pass this into the cboItem...with no luck...
VB:
Private Sub CommandButton1_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Order")
'find first empty row in database
iRow = ws.cells.Find(What:="*", SearchOrder:=xlRows, _
[Code]...
The below populated the combo box cboItem:
VB:
Private Sub OptionButton1_Click()
With Me.cboItem
.Clear
.List = Application.Transpose(Worksheets("Item List").Range("List1"))
End With
End Sub
I am new in Excel VBA and working on developing a form for Quarterly Reporting. My userform (Quarterly Report) contains controls such as combobox (one of them). I am trying to have another Userform (Risk and Mitigation) to pop-up when a specific item is selected.
Example:
With cboRiskScale
.AddItem "High"
.AddItem "Moderate"
.AddItem "Low"
End with
cboRiskScale.Value = ""
I am looking for the code where I will be able to have the "Risk and Mitigation" userform pop-up for user input when the "High" is selected.
How do I set a ComboBox list to read values from an array? I tried the following in VBA, but it didn't work....
ComboBox1.List = Array("January", "February", "March", “April”, “May”, “June”, “July”, “August”, “September”, “October”, “November”, “December”)
Is it possible to count the number of comboboxes on a userform? Or better yet can I fill an Array with all the combobox names on a userform? I can count the controls on a userform but I'm trying to count just the comboboxes? Instead of all the labels and textboxes and frames.
I would like to loop through them for validation instead of doing it by each one by itself!
I've been writing a UserForm in Excel that serves the purpose of a front-end contact/reporting spreadsheet.
I've managed to get a multitude of elements to work together as of yet, however have been having problems writing data to the correct place on the spreadsheet.
What I've already achieved:
The first interactive portion of the userform currently has a TextBox (ArtistAgentAddEmail) - this is the email that we would like inputting on the spreadsheet.
a ComboBox which is populated on 'Userform_Initialize' into an array (ArtistAgentAddDestination) - The range of this array is A1:AC1.
[Code]......
What I would like to do next:
The issue that I've been having is getting the email to be written into the correct column. Once I have typed in my email and chosen my destination from the combobox, I would like to write this email address in the column of the destination chosen.
E.G. The first 5 elements of my ComboBox array are: Neil O'Brien, CAA, CODA, ITB and PRIMARY. If i got an email from somebody in the CAA organisation to add a new contact to the reporting, I would like to be able to add this address via the userform underneath the previously added contact.
The code that I am currently using for my confirm button is:
[Code].....
Attached File : Userform Contact Sheet - 27th June.xlsm
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedI have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
I'm trying to get some vba to automatically find the range of data in a spreadsheet (So start from a specified point and loop until it's blank) and populate a combobox with this range accordingly. I have read numerous articles and posts but nothing seems to work!!
I am using Excel 2007.
The code below extracts unique distinct values from column A, except cell A1. Then the code adds the extracted unique distinct values to the combo box.
Sub FilterUniqueData()
Dim Lrow As Long, test As New Collection
Dim Value As Variant, temp() As Variant
ReDim temp(0)
On Error Resume Next
With Worksheets("Sheet1")
[Code]....
The vba code below copies the selected value to cell C5 whenever the combobox is selected
Copy the code into a standard module.Assign this macro to the combobox
Sub SelectedValue()
With Worksheets("Sheet1").Shapes("Drop Down 1").ControlFormat Worksheets("Sheet1").Range("C5") = .List(.Value)
End With
End Sub
Vba code belows instanly refresh the combobox when values are added/edited or removed from column A,
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("$A:$A")) Is Nothing Then
Call FilterUniqueData
End If
End Sub
My problem is this:
Everything will be working fine if the all combobox and data can be found in 1 sheet, but how could i make some tweaks if the combo box is located in sheet 2 provided your data to be populated is in sheet 1, i tried everything but the combobox doesnt update,
I am trying to set up an macro that runs when a workbook opens
I have placed the following code in the This Workbook Object
Private Sub Workbook_Open()
Worksheets("Test").OnEntry = "Every_Update"
With ThisWorkbook
Application.OnTime Now, "'" & .Name & "'!" & .CodeName & ".Workbook_Open2"
End With
End Sub
I am tyring to instruct Excel to run the macro "Every_Update" every time an entry is made in the worksheet "Test". This seems to fuction.
However, I have other code that I am tring to run in a a macro called "Workbook_Open2"
That macro contains functions that are not yet loaded into Excel during the Auto open sequence. I was hoping that by calling the subroutine, it would allow the functions to be enabled. Basically the function that I a trying to get is to open up another excel file and read a cell.
The code above gives me an error - it cannot find "Workbook_Open2" Should this not be in a module?
i am trying to run a macro automatcially when the workbook opens.
View 9 Replies View Relatedhow do i create a sheetsarray to include all sheets between First and Last? I plan to loop through each sheet in this array to copy data to a summary page, as per [url]
View 9 Replies View Relatedin the WorkSheet_Activate for Sheet 3, which changes the sheet name to the ComboBox Value. Is it possible to use the default name of the Sheet, in this case Sheet 3, if the ComboBox Value = "0". I have the following codes for a ComboBox & Userform:
Private Sub ComboBox1_Change()
Sheet3. Range("E1").Value = ComboBox1.Value
End Sub
&
Private Sub Userform Initialize()
ComboBox1.AddItem 0
For x = 1 To 60 Step 1
ComboBox1.AddItem Format(x, "0")
Next x
ComboBox1.Value = Sheet3.Range("E1").Value
I also have this code ..............
I have a form (userform) which has a combo box and this combo box functions as a selector. I mean, when the person chooses one of the items (sheet1, sheet2, sheet3, etc.) inside the combo box, it views the sheet he/she picked. How will I do that thing? What code/s will I write in my module?
View 4 Replies View Relatedcan i auto open the excel files in 1 folder in the correct path..
for example the path below
C:Documents and SettingsMy Documentsexample
i have many excel files in the folder there, i want it auto open 1 by 1 and do the marco, can do it?