Is it possible to count the number of comboboxes on a userform? Or better yet can I fill an Array with all the combobox names on a userform? I can count the controls on a userform but I'm trying to count just the comboboxes? Instead of all the labels and textboxes and frames.
I would like to loop through them for validation instead of doing it by each one by itself!
I will preface with what I am trying to do. I want to populate a combo box with months. The list will be populated based on a the date range in a dataset, so all 12 months may not bee populated in the combo box. I want the months to be listed in the combo box with their text names displayed(Jan, Feb... Dec) but have their numerical values when selected (1,2... 12). I'm sure there is a way to do this, but for the life of me I can't find how. My initial thought was to assign a value to a specific list index, i.e. assign the value of listindex 6 as "Jun", but I can't figure out the syntax to do that.
This doesn't work, but might give some insight into what I am trying to do
form.combobox.ListIndex(6) = "Jun"
I have a form created, were the user can select up to three pairs of open worksheets for sheet subtraction, to see where Im going with, aka the big idea see here: Column Subtraction With Criteria Via Box & Produce Results In New Workbook
What I dont know how to do, is get the form in the attached workbook to show all the available worksheets. Specifically, from the dropdown combo box, I would like it to list all open worksheet title in all open workbooks.
The combobox is on a userform. This is the code I'm using to populate the Combobox
For Each nName In ThisWorkbook. Names
ComboBox3.AddItem nName.Name
Next nName
I tried to your reply but i get a object error
I can set up a 2 dimensional array by using
array = Workbooks("Workbook.xls").Worksheets("Data"). Range("D_all")
as range D-all contains 2 columns and 20 rows
I can send that list to a combo box by using
Me.ComboBox1.List() = array
If I have ColumnCount set to 2 then both columns will be listed
If I have ColumnCount set to 1 then the 1st part of the array will be listed
But how do I list just the 2nd part of the array
I've been trying for hours to populate a textbox on a userform based on a combo box. I'm including a zip of my workbook to see. (don't laugh to hard at my code, like I said I'm green...:) When you select a mix design in my form I want the next six combo boxes to populate. The way I have it now is based on one of the many examples found here, (none of which have worked for me so far, but this one said "the simplest way to do this is......") And I get an error 425 - "Object not found". I've done searches based on the error but haven't found an answer.
View 4 Replies View RelatedI have created a User form with Combobox's, which in turn look up cell references in another sheet. In order to make maintainence of the combobox's as easy as possible I'd like the look up as many cells as possible, therefore anyone can easily add additional text to go into the user forms. However I don't want the blank spaces to show until something has been added.
View 9 Replies View Relatedi want to use a listbox or combobox on a userform with the values coming from column A in the MAIN sheet. what i need is if the colour i want is not there i type the new colour in it then adds the value to the end of values in coloumn A and too the list for the next time i use the userform. is it possible to do this and how?
View 3 Replies View Relatedi need to be able to fill a combo box on a userform with the data on sheet1 and when you select the item from the combobox it will populate the textbox below.
View 5 Replies View RelatedTwo part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
I have two questions.
1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.
How do I get these values to a ComboBox.
2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1
So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.
Note: This ComboBox is on the UserForm and not on the Excel Sheet.
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedI have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies View RelatedI'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
i have a Combobox on my sheets(1) named Combo1,this combo could be a listbox, so I rather would like to use dropdown...
say I have this array:
myarray=array("QQ","BBBB","CCCC","QWERTY","ASDFG","ZXCVB")
How can i fill my combo with the values i have stored on myarray?
Code:
Sub help()
Dim x As Single
Dim myarray()
myarray = Array("QQ", "BBBB", "CCCC", "QWERTY", "ASDFG", "ZXCVB")
Dim Combob As OLEObject
Set Combo = ActiveSheet.OLEObjects("Combo1")'dropdown("combo1")
[code]....
I have a spreadsheet dealing with orders made by customers and the delivery of the items they have ordered.
When I have delivered the items to a customer I need to note down that their order has been delivered. I also need to enter the date on which it has been delivered.
I have created a user form in which I select the order number of that particular order from a combobox and state whether or not it has been delivered, this is either a "yes" or "no" selected from another combobox.
I then have to note the date in a text box on which the items were delivered.
My problem is getting the answer "yes" or "no" and the date to fill in on the worksheet next to the corresponding order number.
I am trying to find a quicker way to populate a ComboBox with every possible font available to the user on their particular computer in a manner other than simply using a ton of .AddItem statements.
Is it at all possible to get a user created ComboBox to essentially function the same way that the ComboBox for selecting font works normally? Or is it necessary to go through and add the statements myself?
I am creating a interface to specify default settings, one of which is font.
I have 100 tabs numbered 1-100. I was wondering if there is anyway to add a tab in the middle and then fill the numbers in somehow.
Attached is a small sample, how to put the text from A1 to combobox1, the text from A2 to combobox2 and so on
Up to combobox6, when the form loads. but be able to change the text A1 thru A6, and no matter what text I put in A1 thru A6 the form loads with whatever text is there, is that possible?
What I want to do is have a ComboBox (I think it should be a ComboBox, I want the user to be able to select multiple options at once) and display the names of the worksheets in the ComboBox. I could not find a way to do this directly with rowsource and thought about writing a loop to check the current worksheets with their names and put the values into cells, to this way have the names displayed in the ComboBox via rowsource?
View 9 Replies View RelatedI have a userform (uf_PaxInput) with a Combobox (cmb_flight_dest) which I am trying to populate from a worksheet range ("Dest") using the following code:
VB:
Sub LoadForm()
With uf_PaxInput.cmb_flight_dest
For Each Item In Range("Dest")
.AddItem
Next Item
End With
uf_PaxInput.Show
End Sub
The code seems to run okay however whent the form loads the combobox drops down to show only blank items to select. These blank items number them same number of items that are in my named range ("Dest").
Using a combobox with dropdown choice you can select today or yesterday. After this i want to fil in cell A1 the date (now) if choose today, and date (-1) if choosen yesterday. I attach a test sheet with this post.
View 2 Replies View RelatedI am using the method below to fill a list or combo box. It works but is slow when there are to many entries.
Is there a more elegant way to do this? I heard there was a method using the Excel filter function that makes the whole procedure below not necessary....
I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
View 4 Replies View RelatedI am trying to insert information from a combobox into a textbox. The issue I have is that the information in the combobox is generated by accessing a network folder and filling the combobox with the names of the various folders. The combobox only generates the first seven digits of the folder...
Private Sub combobox1_DropButtonClick()
Call ShowFolderInfo("j:Consultant ServicesState Projects")
End Sub
Sub ShowFolderInfo(folderspec)
Dim index As Object
Dim fs As FileSystemObject
Dim folderObject As Folder
Dim SubFolders As Folders.......................
I have a combobox that I populate this way:
' Sets Names in ComboBox1 Contents
With Worksheets("Sheet1")
Set rng = .Range(.Cells(1, "A"), .Cells(Rows.Count, "A").End(xlUp))
End With
With ComboBox1
.RowSource = rng.Address(external:=True)
End With
What I have are 4 sheets one of which has 3 columns that I need to combine into one "Master" drop down, is that possible?
Sheet1 - Column A
Sheet2 - Column A, B and C
Sheet3 - Column A
Sheet4 - Column A
The ideal is I have a list which the use fills in, for sack of argument Goal 1, Goal 2, etc but I have a problem. This list which the user builds I want to appear in a combobox with is quite easy using the list function and naming the range.
The problem I have is that Goal 1 or 2 can be in this list more than once, if it is at all possible I want or would like the Combobox to only show Goal 1 once and not twice or how many times it occurs. I require the Combobox just to show all Goals once no matter how many time they occur.
All I want to do is
put a combo box on a spreadsheet,
have it populated, and sorted - ideally, alphabetically with range names already created.
And
I'd like to be able to click on the Range Name and GoTo the location.
if a combobox in a userform can be populated by the NAMES of defined ranges in a worksheet?
ie. worksheet contains 3 NAMED arrays: W1 = $C$5:$E$6, W2 = $C$8:$E$9, W3 = $C$11:$E$12. Have the combobox in the userform actully list W1, W2, W3 so that when W2 is picked (for example), cell $C$8 will be selected.