Selecting Range When Autofilter Returns Only One Row Of Data
May 15, 2013
I am using the following code to re-name filtered data in column 4 of my worksheet, but I am running into an issue when the Autofilter returns only one row of data. The End(xlDown) is selecting a range that extends to the last row of the worksheet (1,048,576).
How can I write the code so that in the event there is only one row of data, it selects just that row for the paste (and yes it would be redundant to paste over the same value) and then continues on? I would usually use a Cells(Rows.Count, x).End(xlUp).Row to find the last row of data, but I don't think that will work in Autofilter mode.
I have a data input sheet on a spreadsheet with a pick list where we can select an option, but I need another 'flat file friendly' option to appear on a second sheet where the data will be pulled from. For example
If on the front sheet Flat Roof Insulation is selected, it needs to return FRI into the other sheet, there are 45 options in the list.
I am trying to create a macro that will run autofilter on another sheet when I select a number from a drop down menu, with that number being the autofilter criteria. I have tried the following code but it changes sheets before I can select the entry from the drop down menu.
I want to count the nos of cells after selecting some specific parameter in autofilter. I thought this is a simple problem & searched here in various thread but nowhere I found good solution which works nicely. I have attached a excel file where I applied autofilter in the column C & I need to count the nos of cells when I select specific parameter in filter in Column C.
I have 2 worksheets where I need to transfer a certain amount of data from one to another depending on dates.
Sheet ‘A’, is the main data source. Col A holds all 365 dates from 1 Jan to 31 Dec(starting at A2), and the subsequent data for each day is held in cols B to P. Sheet ‘B’ is the destination where the user will specify a key date in cell A3, then in A4 to A32, formulae populate the next 29 dates (ie so there is a continuous run of 30 days).
What I need to do, is to identify the same 30 day range from sheet B on sheet A, then to copy the data in Cols B to P for that range back onto sheet B (pasting in at D3)
i want to write a macro which searches for data in a xl sheet.It should then format that data in a particular format.The data can be present in multiple places.For eg. formating a 5*6 matrix which starts from d4 cell and a 4*7 matrix which starts from e15 cell(please note that d4 and e15 location are not fixed).
I m trying to make a button to add values to another sheet in my xls. Ive done that... now i try to autofill the percentages from left and above one row....
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using =OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using =OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are: completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls cashsheetname Formatted Sheet cashcurrcolumn A cashfirstrow 2 cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _ Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _ Range((PELCurrColumn & PELlastrow)).Value
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
I would like to be able to calculate cumulative returns by selecting a starting and ending quarter from a validation list and finding the product of all the quarters between the two selected. I imagine the equation would look something like this: ...
A1:C1 contain the table headers A2:C5 contain the data A6 contains the value I want to search for I use this formula to return the column header of A6 A6=INDEX(A1:C1,SUMPRODUCT((A2:C5=A6)*COLUMN(A2:C5))) Now, if there are duplicate values in A2:C5, this will return more than one column header What I need is a vba code to view a msgbox with all column headers returned in this case
I am trying to write a UDF that will calculate a value and return it to the cell, and also create a comment in the cell showing the formula used. Here is an example of the "=calculate(A2,B2)" placed in cell A1
Function calculate(ByRef X As Range,ByRef Y As Range) calculate=x*y calculate.addcomment "calculate = " & X & " * " & Y End Function
the problem commes from the add comment field. I can add a comment to any cell but the cell the formula is called from.
So in my code I have two set ranges and want to select from one set range to another. The code I have now does not work because I cannot select Range("POBRF:PO"). This is the code.
[CODE] ARow = Range("A" & Rows.Count).End(xlUp).Row Set POBRF = Range("A1:A" & ARow) BRow = Range("I" & Rows.Count).End(xlUp).Row Set PO = Range("I1:I" & BRow) Range("POBRF:PO").Select [CODE/]
I am having trouble selecting a range in my data to copy to another worksheet. I have declared two variables (startcell and endcell), as seen below, as strings:
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation. Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
A web query I am trying to use to bring an online data table into my worksheet is broken. Now, instead of returning the data table nicely into my worksheet, it imports the code of the webpage, instead, and turns my worksheet into a mess.
The query used to work but there was recently an "upgrade" to the program that populates the web table and the query no longer works and just returns the code for the page, instead. I can see the html code for the table in all of the code it returns but I really need the table to import cleanly into excel.
I can't talk to the people who changed the web program.
I have a nice case to prepare and need weekly riskfree interest returns on the UK treasury bond. Right now I have daily returns and want to convert them into weekly. The problem is, weeks do not always contain five trading days. How can I turn my data into weekly average riskfree interest returns?
******** ******************** src="*********>*********>Microsoft Excel - UK interest daily.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1DateInterest rateweekday 24-Jan-889.871 35-Jan-889.992 46-Jan-8810.053 57-Jan-8810.094 68-Jan-8810.135 711-Jan-8810.051 812-Jan-8810.072 913-Jan-8810.283 1014-Jan-8810.114 1115-Jan-889.985 1218-Jan-889.871 1319-Jan-889.962 1420-Jan-889.913 1521-Jan-889.864 1622-Jan-889.715 1725-Jan-889.71 1826-Jan-889.762 1927-Jan-889.693 2028-Jan-889.564 2129-Jan-889.555 221-Feb-889.741 232-Feb-889.622 243-Feb-889.643 254-Feb-889.684 265-Feb-889.755 278-Feb-889.931 289-Feb-889.852 UK interest daily [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to select a range of numbers based on an active cell. I then want to sum those numbers and have that total reported to a specific cell.
For example:
Say I have a column with a list of dates (Jan/04 thru July/06). I want the user to be able to click on any given field and have that field plus the 11 fields above it summed and reported. Any help?
I came up with something like
ActiveCell.Resize(12, 1).Select
This only selects the data from the active cell and goes down...I need the opposite. I need it to select the 11 cells above the active cell (plus the active cell) and sum that data.