On Sheet1 I have a small list of names in column A and a number next to the name in column B. This number may vary.
What I want to do is on Sheet2 in column A repeat the name based on the number from sheet1 in column B.
Now the sheet is shared among all of us and macro are out. Is this something that is possible with a function?
Id like to apply a formula, any formula to an entire column if it contains data, and incorporate the original data in the calculation and then replace the original data with the result. I don't want to have to create new columns.
I'm using this to fix up database results; a common problem is dates in dot format e.g. 14.11.2008
All I have so far is an autofill formula that overwrites everything. Can someone help me with the rest? I'm using the SUBSTITUTE function to replace the dots '.' with slashes '/'
Sub Create_formula_result()
Dim Limit As Long
Dim r As range
Set r = range("A1")
r.FormulaR1C1 = _
"=IF(RC[0]"""",(SUBSTITUTE(RC[0],""."",""/"")+0) ,"""")"
Limit = ActiveSheet.UsedRange.Rows.Count
r.AutoFill Destination:=range(r, Cells(Limit, r.Column))
End Sub
I'm trying to autofill data in a column from one sheet to another in the same workbook. My goal is to be able to paste data in one sheet and have it appear in another sheet.
View 2 Replies View RelatedI want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
I have attached a sample spreadsheet – what I want to do is insert a column before the current column A and move the current column D in to it and auto fill for every non blank cell in column B. Also, there are different values in column D such as “B03” ,”B41” etc – so for example, it should auto fill B03 until it comes across either a blank cell in column B or it comes across a “B41” and then it should do the same until it comes across a “B42” or a blank cell again. This needs to continue till the end of the report.
View 2 Replies View RelatedI have a Listbox that outputs data to Column A. Is there a way to auto populate Column B with 4 items for each Entry in Column A?
The 4 items that will populate in Column B will always be the same.
I have attached an example to better explain what I am trying to describe.
I have 3 columns in an excel sheet (ID, Signed by & To be checked), and in another sheet, I have names under a column "Checkers".
I need a macro where in if I run it "To be checked" column in sheet 1 should be equally assigned to the "Checkers" in sheet 2 and the rest should be blanks.
find the below sample:
Before Macro:
ID
Signed by
To be Checked
121
AAA
123
BBB
[code]....
I need to assign van seating assignments to a client room census. I have a workbook attached. I am hoping a formula can get me there. The only variables are if the cell in column E has TO BE CLEANED or READY in it, then I want the formula to overlook that particular cell. I don't want to assign a seat to an empty room! My workbook should make what I am attempting to accomplish much more clear.
Also, there are either 12 or 15 seats available in each van, but the workbook reflects that.
I having trouble with an intermediate step filling of an array based on the input range data and polynomial degree. The values calculated (xsum and xysum) for the array (F in the code) are accurate, but the function returns #VALUE for all elements.
Function poly_fit(ByVal Xdata As Range, Ydata As Range) As Variant
Dim a As Integer, b As Integer, c As Integer
Dim deg As Integer, num_pt As Integer
Dim Xs() As Variant, Ys As Variant
Dim F() As Variant, XY() As Variant, coef() As Variant
Dim xsum As Variant, xysum As Variant
Xs = WorksheetFunction.Transpose(Xdata)
Ys = WorksheetFunction.Transpose(Ydata)
If UBound(Xs) UBound(Ys) Then
MsgBox "You don't have the same number of X's and Y's"
End
i was asked to make a fair rota and i found this 1 on this website its useful but i need to add to it. if you download this work rota you will understand what i mean
http://www.ozgrid.com/forum/attachme...0&d=1154640274. i need to find out what the formula/macro is used in this work rota ...its exactly what i need but i need to add saturday and sunday to this rota and more duty columns as their is more employees and when i click the button it randomply places employees in different positions.
I want to change the following code so that it fills a row instead of a column
[Code] ......
This fills column "A" top down but I now would like to fill row "1" left to right.
I have code to fill down to the last row with data for 1 column Can I adapt the code to fill down more than 1 column. current code for 1 column
View 2 Replies View Relatedthe code as shown below so that in column A of worksheet: Data to Text I need an AutoFill from cell A1 to the last row. The value in cell A1 needs to be: 1
If there are more than 1 records then I need an AutoFill from cell A1 to the last row. However, the value in cell A1 needs to be 1, value in cell A2 needs to be 2, value in cell A3 needs to be 3 etc...
The number in cell M21 falls into one of the ranges from C4 to C15. A matrix number needs to be printed in each cell from N21 to N30. The selection of the number to be printed in column N (under Matrix Assignment) depends on the range it is next to in array A4:C15. For example (as shown), the correct number for cell N21 is 122 because 0.2626 falls between 0.24 - 0.2699, and Matrix 122 corresponds to that range.
View 3 Replies View RelatedI have two columns one with the variables names and the other with the values now I have to assign vales to teh variables dynamically using the macros and vba code.
View 7 Replies View RelatedWhen I use customize and assign a macro (to a button) I set the "Marco In" option to "This Workbook" then select a macro from the available list. If you close the Assign Macro dialog and open it again, notice how it appends the name of the file to the macro name. Later, in an automated process the xls filename is appended with a value and I think this is causing the problem because the appended data is static and thus no longer is in sync with the new (latest) filename. How do I assign macro's to either custom toolbar's or autoshapes so that the assignment is tolerant of file name changes? I tried to delete the appended data but it is appended automatically.
I am also curious why some of the macro's listed in the dialog include a filename and macro name delimited with an exclaimation mark and some are macro name only (with no delimiter).
The code below inserts a formula into E2, copies it across to column O and then down to the last row. It works fine but if more columns are added obviously it would need to be changed to go up to column P for example.
How can I change this so that the formula will be copied across to the last column automatically and therefore the code will not need to be changed?
Code:
Dim LR As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
Range("E2").Select
[Code]....
I have a spreadsheet with a varying number of columns with data.
Now I like to copy the header over it till the last column that contains data.
If I used the recorded VBA the range is stated in letters (In the sample below column K but this can be any column).
What is the best way to code it in such a way that one gets the headers till the last column used?
Range("A1:B1").Select
Selection.AutoFill Destination:=Range("A1:K1"), Type:=xlFillDefault
I am working on a Productivity Log and can't figure out a way to count unique values, and also average the time per assignment.
Assignment with the action code A - should take 2 hrs to complete, all other action codes should take 20 minutes.
I need to show how many of each action codes were done for the day, and what was the average time taken to complete each. Even better, how much for A action codes, and how much for all other.
I have a spreadsheet that lists numbers in a column. They increase 1 number at a time, however the same number is listed 24 times before increasing to the next. Scaled down to 3 times it would look like this: 111, 222, 333, 444, 555, each one of those individual numbers would have their own cell. When I highlight the column and drag down, it starts doing decimals..how do I get it to recognize it? sample.xlsx
I want to drag it down to continue the pattern. Right now, I type a couple of numbers and drag to finish the section.
I want to write some VBA code that simulates the double click of the square in the lower right of a selected cell. When you double click it, it fills every cell in column A until the first blank in column B. I was able to find this code searching around:
Code:
Selection.AutoFill Destination:=Range("A10:A" & Range("B10" & Rows.Count).End(xlUp).Row)
Selection.Copy
The issue with the above is that it copies the data all the way down to the LAST row in column B with data.
I want to have the macro stop when it finds the FIRST blank cell in column B.
Just as an example, the last row of data in column B is 100, but in row 67 the cell is blank, so I want it to stop at row 66.
I have the following VBA code that will copy data from one workbook to another.
Sub copytoanotherworkbook()
Dim smallrng As Range
Dim destrange As Range
Dim destWB As Workbook
Dim Lr As Long
Application. ScreenUpdating = False
If bIsBookOpen("P&WM Estimate Tracking Sheet.xls") Then
Set destWB = Workbooks("P&WM Estimate Tracking Sheet.xls")
Else
Set destWB = Workbooks.Open("N:Estimate SheetP&WM Estimate Tracking Sheet.xls")
End If
Lr = LastRow(destWB.Worksheets("Tracking Sheet")) + 1
Set sourceRange = ThisWorkbook.Worksheets("Links").Range("A1:L1")
Set destrange = destWB.Worksheets("Tracking Sheet").Range("A" & Lr)
sourceRange.Copy
destrange.PasteSpecial xlPasteValues, , False, False
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
The problem I am having is that when it copies the data to the last line of the destination workbook, I have a formula in column I of the destination workbook that calculates days remaining. How would I go about creating an autofill to fill the formula to only the last row of data? I've read some posts on this, but I don't think they deal with what I need.
I have a colum full of durations in 00:00:00 format. I need a forumla to look at these durations, count the seconds and then multiply those seconds by a predfined rate. In effect giving me a second colum full of costs.
I have attached a screenshot f the data, and the rate should be 0.0073p (.73 of a penny)
I am trying to auto fill this formula down a column but it doesn't keep the C4,D4,E4...ETC to stay constant
I manually did these two correct ones
=SUM(C5*C4+D5*D4+E5*E4+F5*F4+G5*G4+H5*H4+I5*I4+J5*J4+K5*K4+L5*L4+M5*M4+N5*N4
+O5*O4+P5*P4+Q5*Q4+R5*R4+S5*S4+T5*T4+U5*U4+V5*V4+W5*W4+X5*X4+Y5*Y4+Z5*Z4+AA5*AA4)
=SUM(C6*C4+D6*D4+E6*E4+F6*F4+G6*G4+H6*H4+I6*I4+J6*J4+K6*K4+L6*L4+M6*M4+N6*N4
+O6*O4+P6*P4+Q6*Q4+R6*R4+S6*S4+T6*T4+U6*U4+V6*V4+W6*W4+X6*X4+Y6*Y4+Z6*Z4+AA6*AA4)
when I drag it down it incorrectly looks like this:
=SUM(C7*C6+D7*D6+E7*E6+F7*F6+G7*G6+H7*H6+I7*I6+J7*J6+K7*K6+L7*L6+M7*M6+N7*N6
+O7*O6+P7*P6+Q7*Q6+R7*R6+S7*S6+T7*T6+U7*U6+V7*V6+W7*W6+X7*X6+Y7*Y6+Z7*Z6+AA7*AA6)
I want C6,D6,E6 to be C4,D4,E4 ETC
DATA
DATE
PRICE
DATA
20120621
118.1000
[Code] .......
I have 3 columns (data, date & price). What I would like to do is find the last populated cell in 'date' column and autofill it based on column 'data'. The tricky thing is that the date form is text and while autofilling manually it changes.
I have over 9,000 rows of data. In column A, I have different values that I need to populate down to associate with values in other columns. I can't simply autofill all 9,000 cells in column A at once, because the values that need to be filled down change at irregular intervals.
My end goal is to be able to filter out values in column B to show their association with the value in column A, but I need column A fully populated.
So I need a way to fill A2:A7 with value from A1 (I don't care about B7 being empty, I can still have Martha in A7 with no adverse affects). But I need the fill to continue through 9,000+ rows where the number of rows to fill is inconsistent between value changes in column A (Martha-5, Sarah-3, Beth-4, Donna 3), and there are over 400 unique values in column A.
This is definitely more involved than I am familiar with, but any simple way for me to identify and list which of the 400 bakers made scones..
A
B
1
Martha
[Code]....
Master Template
Project 1
Project 2
Task 1
1 - Mar
28 - Dec
Task 2
2 - Mar
2 - Jan
Project Due
5 - Mar
4 - Jan
Above is a table we have for high level tracking on specific tasks due for projects.
What I want to do is: If the last cell in a column = Jan then it will automatically copy the whole column and insert it into a Sheet named January and have it automatically update. Below is the end result.
January Template
Project 2
Task 1
28 - Dec
Task 2
2 - Jan
Project Due
4 - Jan
1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
I have been struggling to find where my code is throwing up an error 1004 on the last line of the below code. I have a number of tables which will update automatically from Pivot tables on another sheet.
So the first part of the code is adding in the new column and then I want to autofill the date into the headers of the column which I thought the below would do, but I just don't understand why I keep getting the error. My data is dynamic as it will grow month by month which is why I am using R1C1 referencing.
Sheets("PNN Table").Cells(9, 16384).Select
ActiveCell.End(xlToLeft).Select
ActiveCell.Offset(0, -2).Select
Selection.AutoFill Destination:=Range(Selection, Selection.Offset(0, 1))