(File is attached here)
I am trying to work on Sheet 2(Details per person). I want to be able to display all items in a row that matches the 2 criteria (Skype ID and Date) and the items are based from Master Raw file which is in another sheet. I would like to just use index and match.
=LOOKUP($C1,$A1:$A1,$B1:$B1)
Though i wanted to rid the Na error from it when C is blank
I seen a few ways, And wanted to try the method of using Countif becouse it can be used withen the same cell without using extra cells like another method i seen "=IF(ISNA(A1),0,A1)"
what i know of countif
This function counts the number of items which match criteria set by the user.
=IF(COUNTIF($A1,"")),LOOKUP($C1,$A1:$A1,$B1:$B1),"")
so how the heck can the countif function be used to rid the NA of a lookup. i just cant see a relationship between counting a lookup.
I need to count the total number of times 4 different values appear in a column. This formula works for one value:
=COUNTIFS(Source!$C:$C,$B5,Source!$J:$J,$L$3,Source!$L:$L,$H$1)
Where H1 contains the word Assigned. I need to also find and add to count for matches in I1,J1 and K1 which contain New, Pending and Work in Progress respectively.
I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.
Sheet1 AB2BK
1003 CV1173, CV3133BK1004 CV1010, CV1010A, CV13514BK1005 CV1012, CV1257, CV17995BK1006 CV1836, CV506
Result after code has run.
Sheet2 AB1
BK1003CV11732BK1003CV3133BK1004CV10104BK1004CV1010A5BK1004CV13516
BK1005CV10127BK1005CV12578BK1005CV17999BK1006CV183610BK1006CV506
Can you display items from 1 column on a worksheet in 2 columns on a Listbox?
This is to avoid having a Listbox that is too long for the form, (I know I can use a scrollbar and I am but I would still like it shorter if possible).
How can I submit the data from userform in the spreadsheet vertically like A1,A2,.....
View 9 Replies View RelatedI have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedEach sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
View 3 Replies View RelatedExample:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
i want the compile all information from few sheet (20) with same format on daily basis based on due and CF status cash flow. the format as below as the result will same as original format,
No.
Receive Date
PRF No.
Frank No
[Code].....
I need to bring in values into one worksheet from another worksheet using row 1 and column A as criteria. I have previously done this using Sumproduct. However the complicated issue with this new worksheet is the setout. The source worksheet (see attached) has the actual data spread across columns. How can I bring in the values to the 'Summary' sheet from the '0607' sheet using the Employee number and the seg code as 2 criterias to lookup and bring in the resulting data (which is spread out in the purple area in the '0607' worksheet).
View 8 Replies View RelatedI've read the how to for finding the nth occurrence using index/match but the example given does not really help solve my issue. The file I've attached is a condensed version of the actual file, which has more columns but I deleted all but the necessary ones for clarity. What I am trying to accomplish:
On sheet1 there are three columns, Business, Amount, and Closing Date.
Not all the business names have a closing date and the spreadsheet is sorted alphabetically by business name, so sorting by closing date, and using the method used in the topic " find the nth occurrence in excel", is not an option.
On sheet2, I would like to see ALL the business names that have a closing date in the respective month, as opposed to just the first. Then to the right of the business names I have the sum of all the amounts in that month, but I figured out how to get that one already.
I have a long list written twice in 2 worksheets worksheet A has a list with some of the numbers repeated. worksheet B has the same list (none repeated) and another list with new numbers beside it. What I need is to take the new numbers from worksheet B and put them next to their correlating number in worksheet A. With many of the numbers being repeated I need something to identify and repeat the new #. I'd copy and paste and drag etc. but there's about 21,000 numbers to go through.
View 3 Replies View RelatedThe default sheets are at the bottom. I would like to move the bottom horizontal sheets to left side vertically.
How to display all sheets name at the left vertically permanently?
I have a list of numbers I want to display horizontally instead of vertically. Is there a simple way to do this other than retyping each number?
My worksheet is attached.
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I have a long column of 9-digit numbers which represent the swipe-card-ID's of patrons accessing a parking facility. Most of them occur more than once, some of them many times. There is an operational rule that bars them from using the facility more than x times. (I can't implement this limitation in the parking software/hardware, or I would happily do so.)
So my question is, is there a way to process through that column, identifying each unique ID, and reporting any that occur more than x times?
In the attached workbook, the following formula appears in column B of the "dropdown" tab. I want to basically do a two criteria lookup, using the values in column A and the value of cell B1, which is a dropdown based on a dynamic range consisting of the company names on the Discounts tab.(starting with cell E1, extending rightward) To make this easier for testing purposes, I'm curretly using cell E1 instead of B1, which is just text.
It seems like this ought to work, but somehow it doesn't:
=OFFSET(Discounts!$B$1,(MATCH($E$1,Discounts!$C$1:$AA$1,0)),(MATCH(A5,Discounts!$B$2:$B$200,0)),1,1)
I am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
[URL] ........
What formula should I put in NUTRISTATUS column. That will search value in the table of MALE BMI and FEMALE BMI. for example when I input data M(male) in ***(gender), age in M(m0nth) and BMI it will search in MALE BMI table..
and I input data F(female) in ***(gender), age inM(month) and BMI it will serach in FEMALE BMI table.
and if the criteria match will appear the word SEVERLY UNDERWEIGHT or OVERWEIGHT or UNDERWEIGHT or NORMAL or OBESE in NUTRISTATUS Column..
Code:
Private Sub GetColData()
Dim SrchRng As Range
Dim SrchVal As Range
[Code]...
And it is also possible by using Column Number to retrieve the data SrchTxt, which is in a cell in the Row, in which "Roy" is found. This Row in this example is Row 5. Column Number may be anything within the search Range. Column Number is 3 in this example.
In Sheet1 "Poet" is in C1. (SrchTxt)
How to retrieve data of the cell in Row 1 in the column where "Roy" is found?
I need to be able to count items if they match a condition in another column, as below
A B
1 Apple Red
2 Apple Green
3 Apple Red
4 Pear Green
5 Apple Red
6 Pear Green
7 Pear Red
8 Apple Red
How can I count how many Red Apples there are. The answer should be 4 but when I use countifs I can either count the no of apples in Col. A or the no of colour Red in Col. B.
I have tried every combination of if, vlookup, and count that I can but keep getting errors or single col. counting.
I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant.
View 9 Replies View RelatedI'm trying to create a formula that will lookup multiple criteria within a table, however the problem I am having is that one of the criteria needs to fall within a certain a date range. I've used index & match to look up the dates when they match exactly, but how to return the same value for when they fall within a date.
I have attached the spreadsheet - Date Range.xlsx! The requirement is to get the correct "pay" from the "Contingent Workers" sheet to the Timesheet sheet. So it will match the Employee ID, but also the date on the Timesheet tab will fall between/or be the exact date indicated on the contingent workers tab.
I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant. I have attached my sample spreadsheet.
View 7 Replies View RelatedI've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
see attached workbook. I want VBA to insert an index/match forumla on sheet 1 to lookup a value from sheet 2. I don't want it to specify a range though. I want VBA to look to see if there is data above and to the left of the cell and if it is true insert the index/match formula. Then it won't matter what row or column I put the headings in.
View 2 Replies View RelatedWhat i am looking to do is have column D display the value in column B...if column C is not blank. Here is an example.
View 4 Replies View RelatedI am trying to create a list of all instances where contents in A3 is found in C5:C12 and return the values in D5:D12 without any spaces. Right now I can do it in two steps but I'd like to clean it up and do it with only one formula.
View 7 Replies View RelatedAm trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.