Daily Iam Entrying 100`s Of Supplier Data And Material Detail,
I Want Data Should Be Poped Out While Entering In Dataentry Sheet And Data Selction Should Be From Ohther Prefilled Cells. Auto Merged Post Until 24 Hrs Passes;Here Is The File
=IF(E14<=0,0,IF(N9="yes",MAX(E15*C15,30),30))
I am currently using the above formula and need to make an addition to it.
If D8 is greater than 9000 and less than 9999 then the entry will be 35 rather than 30. Any other entry in D8 would leave it at 30
I have a list of new payments received (sheet 2) along with their agreement numbers which I want to match to the list I had last month (sheet 1) to see which agreements are still paying, which have stopped and if there are any new ones.
The problem is that the the list of new payments received shows the agreement numbers with random prefixes and suffixes so my lookup returns #N/A
Sheet 1 - 24020130
Sheet 2 = 24020130FLE
My basic thinking (and I mean basic) is to do an edit/replace on sheet 2 entries and replace the FLE's with with nothing thus removing them completely then running the lookup but that doesn't tell me which are new payments received.
Then I could make sheet 1 text blue, sheet 2 text red, combine them, re-sort and manually go through the list but I'm hoping there's a sexy formula just waiting to be unleashed.
I have a spreadsheet of courses required to reach a certification. On this spreadsheet I have listed the number of hours required for each course in one column, and how many hours I have accrued in an adjoining column. Not all the hours will occur at once, so I tend to bound from cell to cell adding hours in small amounts. What I am trying to do is create a macro that will allow me to add to the existing number of hours to the newly accrued hours, without typing over what is already there.
For example…Class 1 requires five hours total, and I have two hours accrued. If I accrue two more hours (for a total of four hours) I want to update cell E2 without going in to this cell manually and changing this number. I would like to enter the additional two hours in a text box or similar function, and have that function update E2. To add to the level of difficulty, there are four levels of class. This means not only do I need to be able to select which class hours need updated, but which level of class. I have attached the spreadsheet I am working with to try to make things a little clearer.
I have a cell with a formula in it. I want to use conditional formatting on this cell if the formula result leaves it blank. Given the formula is in the cell it's never recognised as blank. If an entry is input instead the formula then obviously I don't want the conditional formatting.
What formula can I use in the conditional formatting for it to recognise the Cell formula as blank?
i'm trying to get a column to count all blanks but only if there's and entry in the cell to the left. for example i have a list of names which is picked up from my main database in column a, then in column b there's dates, non applicables and blanks. however the columns are longer than the list of names to allow for growth, so there's a lot of blanks at the bottom which i don't want to count. so is there a way to count only the blanks in column b if there's a name in column a alongside it
View 3 Replies View Relateddo Different SORT based on data entry.
I have a macro in a workbook that looks like this:
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I have a workbook that has a sheet for each month. Everytime something gets worked on in the shop, a line of information gets filled out in that months sheet. On a separate sheet in the workbook, I need to show what the top 5 things(according to how many entries there were for that item) that got worked on that month are. The info I need is all input into the same column, just different rows.
View 5 Replies View RelatedI need to know how i can select an option from a dropdown list and have it drew data from a table and place it in a certain cell based on my choice.
i have attached a sample form.
in the sample form i have two dropdown lists.
Countries and POD
What I need is when i select an option from the POD list the data on the Rate table will appear on the left side in order of course.
Attached File: test1.xlsx‎
I have the following formula in cell H2:
=AND(EXACT(G2,UPPER(G2)),(LEFT(G2)>="A")*(LEFT(G2)<="Z")*(MID(G2,2,1)>="0")*(MID(G2,2,1)<="9")
*(MID(G2,3,1)>="A")*(MID(G2,3,1)<="Z")*(MID(G2,4,1)>="0")*(MID(G2,4,1)<="9")*(MID(G2,5,1)>="A")
*(MID(G2,5,1)<="Z")*(MID(G2,6,1)>="0")*(MID(G2,6,1)<="9")*(LEN(G2)=6))
I would like to prohibit data entry in G2 if H2 reads "false" and allow data entry in G2 if H2 reads "true" .
i am trying to find a way to automatically copy information from a worksheet on my computer([list.xls]-List of accounts) to a worksheet on a shared folder([summary.xls]- accounts that have paid)
example:[list.xls]Sheet1!A:A has account numbers, C:C has account balance and D:D has notes on account.
If D:D is "paid", copy acc# to [\foldersummary.xls]Summary!A1, balance to B1 and notes to D1.
If D:D is "payment pending" do same as above but in row 2 and so on.
I need to create a Drop Down Menu that gets it's data from another group of cells. I have done this before but it has been sometime ago and now I can't remember.
View 3 Replies View RelatedI have a worksheet designed to look like a form. That worksheet pulls data from an "Application Data" worksheet using INDEX and MATCH formulas. That part works great. The user enters an Application number on row 8 and it populates all of the other cells. In fact, in cell O7 (not pictured), I have it generating the row number the data came from (based on a MATCH function).
Here's my question--if they go in and change a value in one of the other cells, they should be able to press an "Update" button. That will then kick off a macro that goes to the "Application Data" sheet, finds the row that has the Application Number (from row 8) and updates the values based on what the user entered on this form.
How do I write the statement that selects the row based on the Application Number?
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc
Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example
John Red
Julie Red
Bob Blue
John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
What I am trying to do is get the ROW 13 and ROW 18 outputs depending on inputs in ROW 2 to 5. Inputs in ROW 2 to 5 can have any value in any year. I would like to perform the calculations if the value in column U is 2 (if 1 then no action required)
I don't need ROW 10, 11, 12 separately if that is easier ...I am interested in getting the ROW 13 basically.
I'm trying to get a formula to show me the value of one cell based on the value of another to automate some internal processes. Cell J3 returns today's date, then J4 says what week number that is. J5 concatenates the two to make the look up. Column A is named range "PN", and columns C onwards are named ranges to match the column heading.
What I'm wanting is for the result in test cell 2 (J8), is to return the stock requirements for the current week, based on the result of cell J5. I can do this by using nested IF statements, but that would be 8 cells to calculate, then another one to find the cell that has a value. If there a way to get Excel to recognize the value in J5 as a range name, so it just needs the one formula?
I have a list of data and I want to identify the unique entries for both columns but the second column has to unique to the unique values in the first column.
Example List
Fruit
Color
Apple
[Code]....
i have managed to pull together some code that will deny people adding data into cells if they have 5 of the same entry. the entries are entered in a range and are matched against a single cell outside of the range. heres the
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim greycell As Range, i As Long
If Not Intersect(Target, Me.[grey]) Is Nothing Then
Application.EnableEvents = False
For Each greycell In Target
If WorksheetFunction. CountIf(Me.[grey], greycell.Value) > 5 Then
i = greycell.Interior.ColorIndex
greycell.Interior.ColorIndex = 3 'red
greycell.Select
MsgBox "no cell entry past 5", vbCritical, "ERROR"
greycell.ClearContents: greycell.Interior.ColorIndex = i
End If
Next
Application.EnableEvents = True
End If
End Sub
what i need with is adapting this code to match two ranges as i cant use the worksheet_change event twice. i need it to be as if they were seperate events but are merged together. eg:.............
I have recorded a macro to sort a range of cell based on two values that is dependent on time in another cell. I now want the macro to run automatically when refreshing the workbook with F9, so as the time changes so will the sorting. Everything works fine except the sorting doesn't refresh when F9 is refreshed.
My recorded macro is:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim X As Long, FillCT As Long
For X = 1 To 4
If Cells(Rows.count, 1).End(xlUp).Offset(0, X - 1) <> "" Then FillCT = FillCT + 1
[Code] .....
AUTOMATE TRANSPOSE 2-13-14.xlsx In the attached file, I am looking to automate the transposing of the date and numbers under each bold number. Data is truck # in bold, the engine oil change date and mileage below. I copied the data from a pivot and need the date and mileage in columns, date on top with mileage below. I can do it with paste special one truck at a time, the big chunk of data is about 2000 rows deep and was hoping the transpose paste special could be automated, I've made a few attempts on how to do it but can't get it.
View 6 Replies View RelatedI have a spreadsheet that I need one thing automated on it (for now). It is a tracking sheet for our QA coordinators. What happens is they have a list of medical charts that are incomplete, when they mark the column complete with an "x" then the cell that contains and "x" under the Team Leaders name should disappear.
I have a code similar but I don't know who to use and array in the code.
This is what I used to change the date of a fields automatically (I recieved this from someone on line here)
I am looking for a way to get a spreadsheet to automate calculations of unit costs based on variable packaging names.
I have a series of packages that are denoted by text phrases. Examples:
4/6/12
2/12/12
6/4/12
18/12
24/12
For our purposes let's say the package names above will always be in column A. Column B contains the frontline price of a case of product represented by the phrase in column A. Column C will contain the cost per unit of product - this is obtained by dividing column B by the number of each package arrangement that can be found in one case. Most of the time the number of package arrangements per case is denoted by the very first number in the package name (ie, 4/6/12 would be 4). This won't always be the case though (18/12 would be a package arrangement of 1).
I am looking for a way for the spreadsheet to do all of the following and return the results in column C: if the package name contains "4/6/12", divide column B by 4; if the package name contains "2/12/12", divide column B by 2; if the package name contains "6/4/12" divide column B by 6; if the package name contains "18/12", divide column B by 1; if the package name contains "24/12" divide column B by 24.
I m use Excel 2003 to automate the following sequence of events that I currently do manually?
AutoFilter to filter the City in column B
AutoFilter to filter the Rotation in column X
AutoFilter to filter the Positional Status in column Y
Hide columns B:W
Use the computer mouse to select a range of that includes columns A, and X to AR (inclusive).
Copy 'n' paste this selected range to worksheet: Data to Text at cell A1
Insert a new column by selecting column A and right-clicking on the column and selecting Insert
Populating the new column A starting at cell A1 with number 1 and autofilling down to the last record (1, 2, 3, 4, 5, etc...)
Delete the folowing columns: C, D, E, G, J, L, M, N, P, Q R, S, T and V
Copy 'n' paste the all the remaining data to a new documnet in MS Word 2003
Select the entire table in MS Word
From the MS Word file menu - Select Table - Convert Table to Text
In the Convert to Table to Text pop-up window - select Other radio button and type in a forward-slash "/" in the input box adjacent to the radio button (without the quotes).......................................
I need to extract for each individual dive: Onset/start of dive (when the whale has completed its surface interval and begins its descent)
Rate of Descent (meters/second)
Onset/start of bottom phase (the whale has stopped descended and begins the "foraging" phase of the dive...not necessary the deepest point reached)
Number of lunges (you can see these if you plot the data. They are lunges at depth indicative of feeding behavior)
End of bottom phase (begins to ascend)
Rate of Ascent
End of Dive (surface intervals begins)
I've attached a brief sampling of the data in case you're curious.
Over the years I have identified these points through visual inspection of Excel charts. It's very easy, but extremely tedious and not at all efficient. I am interested in expediting this whole process and am more than willing to learn programming (i.e. visual basic or the like)...but only IF it is the best approach for this application.
I have attached two dives worth of data, so we can see what the data looks like. Each data set can contain from 1 to 8 hours worth of data.
how to automate data from excel into word. This vba code takes every sheet from excel and puts it into a word document:
Code:
Sub CopyWorksheetsToWord()
' requires a reference to the Word Object library:
' in the VBE select Tools, References and check the Microsoft Word X.X object library
[Code]....
My problem is that it doesn't style the data into a table, is there any way to do this with the code I have posted? perhaps with a .Style code or something of that sort?
My problem may seem similar to "conditional sumif", but I could not solve it with that approach. The examples of sumif or sumproduct always use
E2:E25="Low"
notation, in my case I need a range on the right hand side of that comparison. I have several brands which belong to some producers. I'd like to sum the values of all brands belonging to 1 producer. The brands and their producers are listed on the same sheet. An example is attached.
I am trying to automate data import, instead of doing it manually all the time. I recorded a macro and now I am trying to edit it so that it can be used with any file.
Here's my code -
I put together a little table for one of my LAN based facilities to track their Overtime Savings as compared to each of their individual units. It works great.
What I would like to do is to export the data on a weekly basis to Access. I set up an access table to recieve the data and I can get it all to work just fine except I want the users to just click on a menu item and have the export take place in the background.
I know how to create on the fly menus and get them to accecpt commands from Excel Macros so that is not an issue.
I know how to share data in Excel from Workbook to workbook, closed or open. I'm sure it can be done Excel to Access I just can not for the life of me find anything to jumpstart me in the right direction in either application's help files. Anybody out there linking their Excel data to Access?
I recorded a macro to open the Form on the Data Menu. Sample Worksheet Attached. After starting the macro recorder I selected the Food table cell (located to the right on the worksheet). Then went to the Menu bar.... Data Forms... and Clicked new.... followed by close and then stopped the macro Recorder. It produced the following code.... which reflects a code error when run.
Sub McrEnterFood()
'
' McrEnterFood Macro
' Macro recorded 20/01/2010
Range("P1:U16").Select
ActiveSheet.ShowDataForm
End Sub