I am trying to write a macro that auto filters a worksheet automatically any time a user activates the worksheet. I already have the macro in place to autofilter the worksheet and have it linked to a push button on the worksheet, but would much prefer the worksheet to auto filter automatically if possible.
View 2 RepliesSetting up all 50 states was not so bad, and I tried a Pivot Table but I have very little experience with them and could not figure out how to show only the nonzero states. So, I looked up how to filter the pivot table and discovered I could just filter the state data without the pivot table.
So, I put all 50 state abbreviations in one column. In the next column I put countif formulas to count how many customers came from each state. (In the meantime, I learned how to use an indirect formula to pull the state ID from the first column and copy it down and have the formula advance for each row... cool!) Then, I filtered the columns on the count twice. First, in descending order; then, without the zeros.
However, the weak side of the filter is that it does not automatically update when a new state is entered. I have to go and manually filter again. So, is there a way to get the filter to update dynamically? I know that a pivot table is dynamic but I have a lot to learn and I can probably browse around and figure out how to show only the nonzero states. Once I learned that, would it dynamically update when a new state is added?
i want to generate sheet automatically from existing sheet applying auto filter on specific column. i attached the sample which 3000 rows actually i have more than one lac rows so i have to put filter on sub_div column and then copy and paste to another sheet and give the name of sheet like F21. i want to do automatically this provide vba code or function for this
View 3 Replies View RelatedHow do I go about using adding an auto filter on specific columns of a worksheet..?
I.e. I want to auto filter column "D", "G" and "I" but none of the columns in-between ("E", "F" and "H")
Currently I can only create the filter for one column or a group of columns that are next to each other)
Private Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.AutoFilterMode = False
Range("d6:g6"). AutoFilter
Range("d6:g6").AutoFilter Field:=2, Criteria1:=Range("e1"), Operator:=xlAnd, _
Criteria2:=Range("e2")
I've attached the file also.
What i intend to do is that : (1) if i enter a value in E3, the filter should only apply using E3 value (currently its applying E3 value but if E4 is kept blank, it takes that as = " " ) . Unfortunately, i need to have the and condition, so i have to find a way in spite of this condition. Any way out ??
(2) If i enter values in A) E3 & F3 B) E3, F3, G3...then it ahould make multiple filtering possible. But when i try to apply such a condition, the same problem as in point (1) occurs, it takes the and empty criteria range as = " "
How to automatically filter can filter and blue-colored cells.
View 4 Replies View RelatedIs there an easier way to use a column FILTER without using the very ugly AUTO FILTER ?
View 9 Replies View RelatedIs there a way to use the auto filter when all cells on a spreadsheet are protected. It doesnt appear to work when cells are protected.
View 9 Replies View RelatedFor some reason I have a worksheet that won't sort stuff by Autofilter any more. I built it as a customer database but for some reason today I just can't get the names to ascend or descend. there is something simple I can check for, I can post an empety sheet if needed but right now I can't really post a list of all my customers info.
View 5 Replies View RelatedUsing VBA in a code. I was using this same code for another workbook before and it worked fine.
[Code] ...
The filter works, but it is not applied. after the macro is run, I need to click "OK" on the filter for it to apply.
After posting a thread regarding sorting issues with multiple columns (under the thread heading "Bulk Sorting" I have conceded that unless I have a sort filter on every column I will not be able to keep data in respective rows when sorting.
My new plan of attack is to insert an empty row (it will be row 13) and apply auto filter across every column (not what I wanted visually but no other option).
Is there a way that I can do this at row 13 on an almost completed sheet? I may just be dumb but I can't stop the filter applying itself to row 1. If I select the whole of row 13 the auto filter or "right click - apply filter" options aren't available. If not I could start a fresh sheet. Is there a way to copy and paste a large amount of cells with different width columns into a new worksheet?
I have a spreadsheet that i am trying to filter. I have tried auto filter but
it is not working. What I have is a coumn with a part number and then 4
columns with other numbers. I am trying to pull out the part numbers that
have a 1 in any of the other 4 columns. below is a sample of my spreadsheet.
A number 1 may show up in column A for one part number and a number 1 may
show up in column C for another part number. I need to be able to put all of
the part numbers that have 1 in one of those columns together and so on. This
is for cycle counts for inventory so the 4 columns represent the week that
those part numbers need to be counted.
wk wk wk wk part #
1 13 26 39 19080
2 14 27 40 100039
4 16 29 1 101007
I ran into a problem with one of my macros the other day. It processes several data files given to us each week. This week, one of the files had Auto-Filter enabled. I had to manually disable auto-filter, and re-run my macro.
I tried recording this action, but wasn't able to. Is there a way to disable/enable Auto-Filter with VB?
if there is a way to have a running total of the auto filter feature
ie. you have 5 different values constantly being updated, can these totals be shown somewhere? maybe in another cell or on another worksheet
Sub Custom3()
Range("A785:BW1455").AutoFilter Field:=2, Criteria1:="a"
Range("A785:BW1455").AutoFilter Field:=3, Criteria2:Range ("N").value
End Sub
Is Field 2 referring to Column B? So if I want to filter on the 9th row heading (going from left to right), my Field: = 9?
In the example above, the 1st criteria revolves filtering on dates with the goal of exceeding a certain date (i.e. > 1/1/08). Is there a way to reference the cell (which is in another workbook which is already open) in the criteria?
I have a worksheet with 24k rows. Column C Contains the State, Column D contains the city.
Right now I am looking for accounts in chicago and surrounding cities..if I use Autofilter and just look for the city on the drop down..sometimes it isn't there..but if I choose the state (IL) and THEN look at the auto filtered cities..it's there.
Is there a limit to the number of unique values that an auto-filter can show?
I have a spreadsheet created in Excel 2003. All the non-entry cells are locked. When I protected the sheet I ticked the option for the auto filter to work. The problem is when I send the spreadsheet to my user - she uses Excel 2000. The auto-filter buttons do not work for her but they do work for me. Is there anyway round this? I need to have the sheet locked (apart from the entry cells) but I also need the auto filter function. I've attached the spreadsheet I'm talking about. The protection password is set to "password"
View 2 Replies View RelatedI have created a macro to use auto filter with the name specified in the vba code, can I specify a range of cell to do Sutofilter.
View 7 Replies View RelatedI tried using SUBTOTATL but no luck.
As always, I prefer without helper column(s) and/or VBA - but If not - I will, probably, have to compromise.
My data is as follows:
- Column Titles on row 9, columns A - CQ
- Data from Rows 10 - 46
- Totals on Row 47
I have set an Advanced Filter range of A9:CQ46. However, when I use the autofilter, it hides my totals row, row 47. That row is supposed to show the totals for the visible cells above it.
How can we program an auto filter a table linked to a cell. For example I have a table with 4 columns (A9:D20) and the 2nd row of the sheet is the filter item (A2, B2, C2 & D2).
Lets say column A has a list of months, column B has a list of names, column C is sales figure, column D is the customer. How can I filter let say for the total sales of Mr. X in the month of January.
I came across a code like this but I don't know how to apply it to my sheet. Of course this code is referring to a different table and links but I just need to learn how to apply this code to my sheet:
Activesheet.AutoFilterMode = False
Activesheet.Range("D2:D60").AutoFilter 1, Activesheet.Range("A2").value
AutoFilter.xlsx
I have two problems:
1) Eliminating doubles when ranking
2) Auto-filtering based on cell values
The first problem is an issue with my formula I believe (I am using a RANK + COUNTIF-1) formula (Shown in tab #2, column L of the attached document)
The second problem will need a macro, but I am not very strong with VBA. In the attached document, I am looking to be able to filter the table in tab one based on the selections I have included at the top. I was able to filter the table based on # of IDs displayed using a formula. The second filter is looking to only show the values in the table that satisfy the condition that column E must match the filter chosen (cell C3).
For example, of the filter chosen in cell C3 is "Yes", I would like the table to rank and display only those rows with a "Yes" in column E.
Attached: Excel_Help1.xlsx
I am trying to write a macro that will:
A: copy data in cell A1 from Sheet1
B: Add an auto filter in sheet2 column A = to what was copied in Cell A1 from sheet 1.
I'm trying to set up a macro to to run and control the AutoFilter in my Excel Spread Sheet. Essentially, all i want to be able to acheive is, instead of inputting the cryteria myself in the auto filter, i want the macro to select the cryteria from a specific cell.
Example...
Running the autofilter, normally you would select "equals or grater than" option and you would input a figure then click the "or" option then input "equals or less than" and a new figure and then click ok. This would sort the range; see the example macro...
Selection.AutoFilter Field:=10, Criteria1:=">=01/09/207", Operator:=xlOr _
, Criteria2:="<=31/09/2007"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
What i want to beable to do is to run a macro which will do the above but instead or requiring the user to input the range cryteria for the filter it would point to a cell to get the value from.
' test1 Macro
' Macro recorded 06/08/2007 by Nigel M Bailey
'
Selection.AutoFilter Field:=10, Criteria1:="> Cell A2", Operator:=xlOr _
, Criteria2:="< Cell A3"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
In doing this i can validate the selection field and just add a search button which then will be perfect!
I'm running Excel 2003 and I have a workbook with an Auto List in Column G. When I attempt to paste a row of data I get the following message.
The operation is not allowed. the operation is attempting to shift cells in a list on your worksheet.
To work around this, I have to convert the list to a range, copy the data and then reapply the Auto List.
Is there another way to work around this or will I have to create vba code or record a macro?
I have a range of data (up to 20,000 cells) that has up to 30 different entries. I need to apply a filter to this data to filter out all but 5 of these.
View 5 Replies View RelatedI have column A containing either "Correct" or "Incorrect".
I have another column D which also contain same values "Correct" or "Incorrect".
I applied auto filer on Column D , criteria is "Incorrect" and on Column A criteria is "Correct".
All the above is done using VBA.
Now, I want a code to convert the value in column A from "Correct" to "Incorrect", only for the rows retured by auto filter.
I have the following code which I cant figure out why isn't working for the first part. I am copying data from two sheets where the autofilter looks at blanks. The copy function on the first sheet is selecting all of the data and not the filtered data. On the second one it works fine.
View 14 Replies View RelatedI have recorded the following macros but need to fine tune them. In Field 1, I would like to be able to have criteria 1 be “=>” the value in cell “D9” instead of “160”. Likewise criteria 2 needs to be “<=” the value in cell “D10” instead of “170”. Fields 2 and 3 refer to columns “E & F” so they would be respective cell values.
View 2 Replies View RelatedThis error occurs after I wanted to use the Auto-filter function for every row. I used to separate the merged cells that used to be into single cells. After that the compiler reports error. Here is the code:
View 2 Replies View Related