How do I go about using adding an auto filter on specific columns of a worksheet..?
I.e. I want to auto filter column "D", "G" and "I" but none of the columns in-between ("E", "F" and "H")
Currently I can only create the filter for one column or a group of columns that are next to each other)
I have recorded the following macros but need to fine tune them. In Field 1, I would like to be able to have criteria 1 be “=>” the value in cell “D9” instead of “160”. Likewise criteria 2 needs to be “<=” the value in cell “D10” instead of “170”. Fields 2 and 3 refer to columns “E & F” so they would be respective cell values.
View 2 Replies View RelatedI would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
i want to generate sheet automatically from existing sheet applying auto filter on specific column. i attached the sample which 3000 rows actually i have more than one lac rows so i have to put filter on sub_div column and then copy and paste to another sheet and give the name of sheet like F21. i want to do automatically this provide vba code or function for this
View 3 Replies View RelatedI am trying to write a macro that auto filters a worksheet automatically any time a user activates the worksheet. I already have the macro in place to autofilter the worksheet and have it linked to a push button on the worksheet, but would much prefer the worksheet to auto filter automatically if possible.
View 2 Replies View RelatedI am running a auto filter macro to I need to change it to only copy column A:B and past in column C:D in the sheet called "Diary". How to change my current macro to only select column A:B and paste it. It is currently pasting the entire row.
Here is the part of my code:
[Code] .....
I want a checkbox to filter column with specific value and hide others. And also there are two checkbox, one should be automaticly unchecked if we check another checkbox.
View 1 Replies View RelatedI want to filter columns from an excel spreadsheet where the value in the cells contains/includes the String "Create".
View 3 Replies View RelatedSheet one contains a table of table from C6:AY7000
On Sheet 2, I want to create a summary of data from Sheet 1 based on 2 Criteria which applies to column I and N.
On Sheet 1, I have put in a formula to link to sheet 2 for the criteria to make things easier.
So BN3 = Sheet2C3
And BN4= Sheet2C4
I have managed to run my coding to filter the data that I correctly want to copy and paste onto sheet 2 - however I only want to copy specific columns.
This is the coding I have written to select and filter the correct data values.
Sub AddFilter()
'
' AddFilter Macro
'
Dim rCrit1 As Range, rCrit2 As Range
With Application
.EnableEvents = False
.ScreenUpdating = False
[Code] .......
This now gives me the correct data in the table.
I want to copy the visible cells from this table but only for columns e, dr, r, v, w, o, z, AD, AG, AQ, AW, AY
The copied data will then be pasted into sheet 2 starting in cells B9
I plan to attach a button on sheet 2, so when the user updates the values in C3 and C4, this will update values in BN3 and BN4 on sheet1, they can run my macro which will go to sheet 1, filter the data on what they have entered and paste the correct values.
How would I go about finding the "Number of Shirts Ordered" values in the top right?
View 1 Replies View RelatedYeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
The issue is the I want to put the condition here in my the code that only copies the desired cells if the sheet is named specifically such as "Jan", if not named as this the worksheet should not be used. The current code I am using was posted on this site in 2009: VBA to copy specified cells from all the files in a folder
My modified code is:
Option Explicit
Public strSourceFldr As String
Public EachFile As Object
Public objFSO As Object
Public objFolder As Object
Public objFile As Object
Public strSheetName As String
[Code] .........
how to filter rows AND columns in a worksheet. I filtered the one column in the spreadsheet (the main "yes, no, or n/A" for each row). Now I want to be able to filter each row. For example, if the column response is "yes" (most are), I want to filter each row to the "yes's, no's, or n/a's" for each column in that row (it's pretty long, from C to KS). I have attached a sample worksheet (the one I am working on minus confidential information).
Basically - I need to filter by a column and THEN, filter each row by the Yes's, No's or NA's in the columns associated with those rows.
I'm trying to filter a worksheet by certain columns but am not sure how to use the criteria range so a lil help would be appreciated!
for the columns: N,O,P,Q,R
I want to exclude rows with the values "N, N, N, 0, 0" under those columns.
How would i construct the criteria for that?
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have a file that has various numbers of columns, some of which i need, some of which i do not. Under these columns, there are various rows, sometimes 50, sometimes 400. I need to write something that copies only the specific columns I need and pastes it into a new worksheet.
For example, in the data file there is are columns property type, loan balance current, and amortization type. I need them to be copied with the information in the rows below them to a new worksheet, to eliminate the unnecessary information in the data file.
Need the VBA script to hide/unhide specific columns within a worksheet.
View 9 Replies View RelatedI have dates values in 3 columns.
A1 - Header - "Holidays in XXXX'
B1 - Header - "Holidays in YYYY'
C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column.
C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
I have the following code:
[Code] ....
When I run the macro, some columns are already hidden. The macro doesn't seem to autosize cells correctly. For instance, one cell in a row appears to have some contents hidden (or below the reading area of the cell). In other instances, the rows are auto-size to huge heights and widths.
I have some columns on which I have a filter, with some columns next to those that have information in them.
What I need to do is filter only columns A-F when apply filter values, but keep columns I-K fixed as A-F change when they are filtered..
Is there an easier way to use a column FILTER without using the very ugly AUTO FILTER ?
View 9 Replies View RelatedIs there a way to use the auto filter when all cells on a spreadsheet are protected. It doesnt appear to work when cells are protected.
View 9 Replies View RelatedIf filtering column C, just showing 'A's, by pressing the add row button, I want to copy the last cell in column C and pasting it in row 73, since it's the next unused cell when the worksheet is unfiltered.
View 2 Replies View RelatedHow do I filter multiple columns of information with the use of one dropdown arrow?
see the attached picture (jpg.) for a visual representation of exactly what I am trying to achieve. Excel Filtering.jpg
I have also attached an Excel Filtering Example spreadsheet for use in explaining how to create this type of stacking filter. Excel Filtering Example.xlsx
For some reason I have a worksheet that won't sort stuff by Autofilter any more. I built it as a customer database but for some reason today I just can't get the names to ascend or descend. there is something simple I can check for, I can post an empety sheet if needed but right now I can't really post a list of all my customers info.
View 5 Replies View RelatedUsing VBA in a code. I was using this same code for another workbook before and it worked fine.
[Code] ...
The filter works, but it is not applied. after the macro is run, I need to click "OK" on the filter for it to apply.
After posting a thread regarding sorting issues with multiple columns (under the thread heading "Bulk Sorting" I have conceded that unless I have a sort filter on every column I will not be able to keep data in respective rows when sorting.
My new plan of attack is to insert an empty row (it will be row 13) and apply auto filter across every column (not what I wanted visually but no other option).
Is there a way that I can do this at row 13 on an almost completed sheet? I may just be dumb but I can't stop the filter applying itself to row 1. If I select the whole of row 13 the auto filter or "right click - apply filter" options aren't available. If not I could start a fresh sheet. Is there a way to copy and paste a large amount of cells with different width columns into a new worksheet?
I have a spreadsheet that i am trying to filter. I have tried auto filter but
it is not working. What I have is a coumn with a part number and then 4
columns with other numbers. I am trying to pull out the part numbers that
have a 1 in any of the other 4 columns. below is a sample of my spreadsheet.
A number 1 may show up in column A for one part number and a number 1 may
show up in column C for another part number. I need to be able to put all of
the part numbers that have 1 in one of those columns together and so on. This
is for cycle counts for inventory so the 4 columns represent the week that
those part numbers need to be counted.
wk wk wk wk part #
1 13 26 39 19080
2 14 27 40 100039
4 16 29 1 101007
I ran into a problem with one of my macros the other day. It processes several data files given to us each week. This week, one of the files had Auto-Filter enabled. I had to manually disable auto-filter, and re-run my macro.
I tried recording this action, but wasn't able to. Is there a way to disable/enable Auto-Filter with VB?
