So, in column A I have a list of dates, I would like that in column B would be automatically inserted the date in column A + 60 days.
Example:
Column A | Column B
29.10.2011 | 29.12.2011
05.11.2011 | 05.01.2012
07.11.2011 | 07.01.2012
08.11.2011 | 08.01.2012
09.11.2011 | 09.01.2012
10.11.2011 | 10.01.2012
When I insert a date in column A the I would press TAB in column B would appear the date desired.
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
Have have a excel spreadsheets with 2 columns. One with the employees name and one with the date that their warning expires. I would like the employees name to be automatically removed after the date expires. How do I do this.
View 1 Replies View RelatedI want to automatically populate C2 with the most current date from B9:B14.
I can't seem to figure out the formula.
How to creat list box and how the day and date hilighted automatically for sunday in red col and saturday and sunday colum should hilight.
View 3 Replies View RelatedI want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Target = "January" Then
ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _
xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
[Code] .....
When a date is entered e.g 1/27/2007 The bill payment dates should all be automatically calculated under the “Date” column. Rules for the date
Rule1. e.g. 1 Month—the date should be 1 month after the date entered (as shown by the simple example 1/27/2007 one month is 2/27/2007 in the sheet)
Rule2 if the date entered is the last day of the month, the calculated date should also be the last day of the month provided it is a working day.
E.g 1/31/2007 one month is 2/28/2007. (provided 2/28 is working day)
2/28/2007 one month is 4/30/2007 (provided 4/30 is working day)
Rule3 If the calculated date based on rule1 and rule2 is a non-working day, the date is pushed back by 1 till it becomes a working day. e.g 1/27/2007 two month is 3/27/2007 if 3/27/2007 is Saturday it becomes 3/28/2007 which is a Sunday, another non-working day. So the output should be 3/29/2007
Rule4, under rule3, the date cannot be pushed to the next month. Instead, we push the date forward. In the previous example assume 3/29, 3/30 and 3/31 are all public holidays, by rule3, it will be finally pushed to 4/1. But this becomes another month. So we push forward instead to 3/26 which is Friday. The output is 3/26/2007
Definition of working dates (Monday to Friday excluding the holidays listed in the sheet).........
Private Sub txttodaysdate_change()
txttodaysdate = Format(Now, "mmm/d/yy")
End Sub
when i use this code i wnat the date to automatically appear in the text box but it doesn't I have type something into the textbox then the current date appears,.
I have a sheet(Sample.xlsx) in which weekly data is collected and this is done by using the VBA code(Present in Copy 1 and Copy 2 button in Master US.xlsm) written by me. But in my code, it inserts a new after asking two parameters, i.e. line range(i.e. row no for eg A64) and date. I want it to automatically search row containing last date and inserts row below it and this needs to be implemented in "Insert Automatically" and "Insert Date" button using VBA code in Master US.xlsm sheet.I dont have problem with second paramenter.
Logic i want to use :
Itergation of whole page
{
If (col A<>Date)&& col A=Average(i.e. contains average word)
then
inserts row above that row
And then ask for date to enter using date variable.
then inserts row above that row containing last week data in col A.
}
"Insert Automatically" in Master US.xlsm sheet is the button which takes system date and implements the above logic.
"Insert Date" in Master US.xlsm sheet is the button which ask for only date and implements the above logic.
Sheets attached.
Master US.xlsm
Sample.xlsx
I work in a factory where we create different types of units daily. Below is a list of planned production on a specific date, say today's date. This is a very crude example, with information missing, and it is important to know that there are conditions attached such as:
The types are added randomly. The amount of types is much greater meaning that each type is on it's own page with breaks between. Everything produced on this date will have a URN (unique reference number) with its first 6 digits equating to yy-mm-dd and the last two being the position of the unit in the production sequence (first=01, second=02 etc).
I have gotten it to the point where if you enter them in sequence (Type A first for example) it will lookup to see the last assigned URN and taking the quantity into account issue the correct URNs.
The issues I have are when the URNs are less than "10", there is a problem displaying the 0 before the digit which disrupts the sequence. I can provide more clear examples if required.
Type A
Date08/04/2014
QtyURN
101314040801-03
203514040804-08
462114040809
123914040810-19
Total18
Type B
Date08/04/2014
QtyURN
245114040820
290114040821
689114040822
Total3
Type C
Date08/04/2014
QtyURN
1111414040823-36
211214040821-22
675514040823-27
Total21
I have 02 separate excel workbooks
01 = source file
02 = data list
The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.
In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.
This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).
Screen shot is attached : Automatic Selection.jpg‎
I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.
Private Sub Workbook_Open()
Range("A1").End(xlDown).Select
Selection.Copy
Range("L1").Select
ActiveSheet.Paste
Range("A1").Select
Application.CutCopyMode = False
UserForm.Show
End Sub
This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.
I am trying to have some automation to my WS and what I want to do, is if a certain column (column 104) is changed, it will fill out that column with the data entered as long as the account is the same (column 5). Here is the code I tried, but realized very quickly, it puts me into a loop. This is being called by a change worksheet fuction
If Target.Column = 104 Then
If IsEmpty(Target) Then
Else
testacct = Cells(Target.Row, 5)
temptest = testacct
s_TempSwitch = Target.Value
Testoffset = 0
Do While temptest = testacct
temptest = Cells(Target.Row + Testoffset, 5)
Cells(Target.Row + Testoffset, 104).Value = s_TempSwitch
Testoffset = Testoffset + 1
Loop
End If
End If
"IN Next Sheet I want to show 28-Feb-2013 by this sheet by connecting to this sheet.
How can I do this? I have also attached a file for this in which i want to show last day of each month automatically whenever i put formula
How to order date automatically for leave balance that does not approved based on total days
View 2 Replies View RelatedI want each workbook to contain one month's worth of sheets, with a sheet containing one day's appointments. I need an easy way to name each sheet tab with the date, for example "01/08/09 Tue" for the first sheet and then all the following sheets will follow on date wise ie "02/08/09 Wed".
View 12 Replies View RelatedHere is what I want to accomplish:
I have a spreadsheet with data in cells A36 to G52. In The D column (D36 to D52) I have a date in there. I would like to have this column sort in ascending order automatically, but also have it sort the other data within the same row with it.
I have tried a couple of VBScripts that I have found in other posts that are similar, but I just get errors when trying it so I assume that I am not putting something in correctly.
Can anyone help me write this functionality? I have other data in a similar setup on the page that I also want to sort automatically but the script for this first part should be just a copy and paste, and change a couple of values....at least I am assuming so.
I made to automatically calculating by date which is time formating want to count the stem hours, but it prompted error?
Sub UpdateColG()
Dim IRow As Long
For IRow = 3 To Range("F").End(xlUp).Row
Range("G" & IRow).Value = Range("F" & IRow).Value - Range("F" & IRow - 1).Value
Next
End Sub
===================================
the logical is Range (F2-F1) returns to (G2)
sample : (F2)10:30-(F1)09:45 =(G2)00:45.
I'm looking for a way to achieve the following:
When entering data in any cell in a excel sheet I would like the previous date to automatically appear in particular cell so the cell will show the date I entered something in the cell. I want the date to be a fixed date, I don't want it to change.
On entering something in a different cell in the sheet, the date of the cell remain same.
After saving the sheet, the next time I open it the dates will still have to be the same as they were the first time.
How do I add month automatically on a date? if my begin date is 06/01/09 and I want to add 6 months to it how can I populate:
06/01/09
07/01/09
08/01/09
09/01/09
10/01/09
11/01/09
I have 2 Excel Files. In the main file I have a macro that copy/pastes data from the secondary file. The secondary file is a daily file that gets its file name changed every day (eg. 14OCT09.xls).
The last piece of the Macro goes back to the secondary file and ends with:
Windows("14OCT09.xls").activate
Range ("A1").Select
Now tomorrow, I have to manually edit the Macro and change the code to 15OCT09.xls before I run the Macro. Is there a way to automatically change this date without having to manually edit it on a daily basis?
I am trying to automatically add a date to a cell (D2 on sheet1) when there is data entered in a range of cells (C8:I59) on sheet2, so I can see the date of the last there was data entered.
View 3 Replies View RelatedThis code below is pasted from Automatically Add Date, Time or Date & Time and uses the Worksheet Change Event
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A2:A100")) Is Nothing Then
With Target(1, 2)
.Value = Date
.EntireColumn.AutoFit
End With
End If
End Sub
It automatically enters today's date into the corresponding B cell. How do I code it so that the date is automatically removed when & if I delete the corresponding A cell?
Each worksheet has 4 days on it.. and there are 4 worksheets per month ( Jan1, Jan2, Jan3, Jan4 ). I have this macro which runs ( dependant on password ) to lock all cells so they cannot be edited after. On this macro I have to enter the month to lock and it adds on the 1,2,3,4.
Sub LockCell()
Dim i As Integer
Dim ws As Worksheet
Const Pass = "password"
Dim InptPass As String
Dim Mnth As String
On Error Resume Next
InptPass = InputBox("Please Enter Password")
If InptPass <> Pass Then
MsgBox "Incorrect Password", vbCritical
Exit Sub
Else...
I'm trying to update an excel document which has a list of employees on it along with their training. Most of the training for individuals needs refreshed in the next year so wanted the table to use the date and perhaps trigger a fill colour change once they are close to needing that training. here's an example
John Smith
course 1
Completed 01/05/10
Refresher required 01/05/14
Once we get a month or two before the required date, I would like the fill colour to change to highlight that they refresher training should be organised soon.
Everyday I receive products that could be categorised into one of the five categories A, B, C, D and E. I enter these on a sheet (SHEET 1) along with an expected date of shipment, which could be any date between now and 12 months later.
In another sheet (SHEET 2), I have months in column A and each product type for each month in column B.
What I want is to write a formula in SHEET 2 so that every time an entry is made in SHEET 1, it automatically adds 1 to the respective cell in SHEET 2. For example, I received 10 products today (5*A, 2*B, 1*C, 1*D and 1*E). As soon as i made entry in SHEET 1, I wanted respective numbers to appear in SHEET 2.
I have made a daily planner for each month. The dates are on separate sheets which are titled 1st Dec 07, 2nd Dec 07 and so on.
This is also included on the actual sheet as well in the form of a heading. I want to know if it's possible to automatically rename the text on the sheet to what the sheet is called?
Or if the first sheet has a title of '1st Dec 07' how can I get the other sheets to automatically be titled in sequence so I don't have to do it manually?
I have an excel sheet that uses date formulas in order to provide data regarding the date that it brings up. My problem is that the formulas do not bring up dates unless the dates are on a weekday. Ex. I would like to look back 3 months in the past, and I do so using the formula =today()-90 (90 for 90 days, about 3 months). I would then like to input this date formula into another function (potentially an if function) so that if today-90 is a saturday or a sunday, the function will automatically bring up the date for the friday preceding it.
View 2 Replies View RelatedI have found that periodically Excel is automatically reformatting everything in large workbooks to Date Format. Initially I save these workbooks with General, Number, Currency, Text, and Date formatting within the cells. Upon opening at a later time, everything is converted to Date Format.
View 3 Replies View RelatedI am trying to create a spreadsheet that will automatically calculate a date in the future.
The future date calculated needs to take the time NOW (as the user completes a field) and determines if this is before MIDNIGHT on the following SUNDAY. If so it calculates the date as a Tuesday 2 weeks on. For example... I request a date now on 1st Jan which is a Thursday. This is before midnight Sunday and so the date calculated would be Tuesday 20th January.
If the time NOW is after MIDNIGHT Sunday and before the next TUESDAY.. ie 0001hrs on the Monday and 2359hrs on the Monday then the date returned should be Tuesday 3 weeks on.. e.g 27th.
It would also need a function that would allow the total number of referrals on a Tuesday to 20 at which point it would overspill and provide a date on the Friday of the same week.. so in the first example it would be Friday 23rd
Is this something that can be achieved with formulas and a set of dates for it to calculate from or do I need to find someone who can do it in VBA for me.