I am trying to work out average for a particular area based on a criteria.
eg:
E F
Area time
A 01:00
B 02:15
A 01:15
C 01:16
B 01:30
C 03:15
In Cell
E100 - 103 I'm trying to work up the average of each area and using the following formula.
=AVERAGE(IF($E$4:$E$61="A",F4:F61,""))
I keep getting an the following error #value!.
i changed the average to median and still get the error.
I'm trying to sort column G for any "Approved" or "Denied" outcomes then find the time difference between columns E and F then divide that difference by the number of approved or denied in column G. I've tried a number of combinations of SUMIFS, IFS, COUNTIFS, and Ave formulas but can't come up with one that works. Here's an example of what I'm trying to do:
Sum E-F if G= "Approved" or "Denied" / the number of "Approved" or "Denied" outc
I have two columns. Column A has lots of repeated values, and column B is a list of numbers. For example:
A 1
A 3
A 4
A 2
A 6
B 1
B 1
B 2
B 1
C 3
C 3
C 2
C 4
Is there any way to output the following:
A 3.2
B 1.25
C 3
Where the second column are the averages. Any Excel function or VBA method will be fine.
i have a excel spreadsheet that contains point of person. Every week a person can or can not compete. That means that there is some days that is blank wouthout points. I want to get the latest 5 points of a person and then out of that 5 i want to get the top 3 point.
View 6 Replies View RelatedI have a series of numbers in the column AB56 going downwards and in AC56 going downwards their respective counts in a data-set.
What I would like to do is find the average of the min and max, the min and max for the average calculation are both determined by looking at the count column, isolating the max, isolating the min, provided they both have a count greater than zero then averaging both results.
eg.
0.1562818960
0.1558039690
0.1553260431
0.1548481172
0.15437019 2
0.1538922643
0.1534143384
0.1529364124
[code].....
In this calculation the MAX is 0.155326043 because it has a count greater than zero, the MIN would be 0.138120697 as it has a count greater than zero, the average of both would simply be 0.1467. i.e. Average(0.155326043,0.138120697)
I have a list of ages of people who cancelled their account. I'd like to find the average age of people within each month.
So column A = age
and column B = cancel date
Let's so for January 2006 I'd like to find the average age.
Logically this is how I see it...
Average Column A (If column B >= 1/1/2006 and < 2/1/2006)
I'm trying to find the best Macro or Formula to get this done.
Sheet 1 has a list of salesperson in column "A" and the total numbers they made on Monday (in the same row, column "E"), Tuesday (In the same row, column "F"), Wednesday (In the same row, column "G"), Thurday (In the same row, column "H"), and Friday (In the same row, column "I"). I also have a sheet for each individual salesperson. I need to find a Macro or a Formula that I can use to give me the average of the numbers if "A5" = the salesperson in Sheet 3 then avarage the numbers from "E5" to "I5" and I want the results to show up in cell "D35".
I am trying to get the average of two columns
column A and Column B
Column A has text (survey type) i.e. Move In, Mid Year, Year End
Column B has the scores given on that survey type i.e. 70
I am trying to get the average of of all the Move In cells from column A
for each survey type so that I get average of all the scores in column B.
How do I average the data in column G, based on two conditions (time in column H = $H$1, month in column I = month in $I$1)
Here's the formula I came up with, but it is including blank cells in the calculation.
{ =AVERAGE (IF ($H$3:$H$100=H1, IF (MONTH ($I$3:$I$100) = MONTH(I1), $G$3:$G$100, FALSE), FALSE)) }
I have 2 columns of data in Excel which I have brought a small section of it below. As can be seen the values in the left column have a large spike (difference of more than 10) at certain points (in this case at 34). I wan to find the average of the numbers in the right column but only till the point where the large spike happens (in this case the average of the first 5 numbers). I've tried AVERAGEIF but it's not what I want. I want this to repeat for the entire column and give me the averages of each of these groups.
10
32.4
11
38.6
12.5
23
[Code] .........
Objective: to create an average variance among exact match RevCode
Example: all RevCodes with "666" should be used to make an average variance statistic
Situation: All RevCode's are not in similar group counts and this creates incorrect averages with a standard formula.
Set of Data
RevCode Observed Expected Variance RevCodeMean
666 200 220 -9.091%
666 205 220 -6.818%
666 207 220 -5.909%
777 500 355 40.845%
767 505 505 0.000%
668 100 105 -4.762%
668 105 105 0.000%
Formula that generates average variance between exact match revenue codes:
=(SUM(B2:B4)-SUM(C2:C4))/SUM(C2:C4)
The solutions can be in VBA or within the spreadsheet either way.
Here is my formula that does not return accurate results:
=IFERROR(SUM(SUMIFS(Tenure!$H:$H,Tenure!$E:$E,{"=1100","=1090"},Tenure!$C:$C,{"=12","=14","=13"},Tenure!$G:$G,"=1/1/2013",""})/SUM(COUNTIFS(Tenure!$E:$E,{"=1100","=1090"},Tenure!$C:$C,{"=12","=14","=13"},Tenure!$G:$G,"=1/1/2013",""}))),0)
I need to average column H from the sheet Tenure IF column E is 1100 or 1090 (formatted as text) and IF column C is equal to 12, 13, or 14 and IF column G is less than or equal to a date and column I if greater than or equal to a date OR if this column is blank.
I tried AVERAGEIFS, the above route and many others. For whatever reason, I have been unsuccessful, but close many times.
I need to monitor the average daily usage of a liquid tank for a customer. We fill this tank every few weeks. The formula I am looking for would ignore the fills and just count the daily usage.
View 9 Replies View RelatedI am conducting some analysis on alarm data of certain devices and am looking for creating a VBA algorithm that will do the following (refer to the table below for example data)
I want identify an asset in alarm (Column F) and based on its asset ID (Column C) and Fault Description (Column D) then find the row when the asset with the same asset ID and fault description returns to an 'ok' Asset State. After the row where the same asset ID and Fault description is found where the asset state returns to 'ok', I want to calculate the total alarm time based on the difference between when the asset ID and Fault description goes from 'Alarm' State to 'OK' state from DateandTime Column.
I want the result to be populated in a new worksheet that displays data with the following column headings as a result of the above calculations: Date, Asset ID, Asset Description, Fault Description, Alarm Time
I have added an additional column to show the type of output I am after.
There are up to 20,000 rows of data I want to perform the above calculation on.
A
B
C
D
[Code]....
Im looking to find the max or highest time in column G based on the criteria (date selected and name) So if the date is the 10/02/2014 in G10 it would look up that date and the name and bring back the time in column H. I have put an example answer in H12.
View 9 Replies View RelatedI am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedRefer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPGâ
I am having a little trouble with a spreadsheet I am creating, the formulas and cell formatting I should be using to enable this to work.
Here goes:
in cell E3 I have a time started (e.g 12:45 pm), In F3 i have time finished (e.g 2:30 pm)
So, what i'm wanting is the time taken in G3 and also, i have the amount of units that is entered manually in H3. I would like I3 to show the time taken per unit.
I am trying to average time in col C. I do not want to count zero or time more than 2 minutes 00:02:00
I tried teh following formula. I do not think this is even close.
=AVERAGEIFS("c3:c50000;c3:c50000;â>0â;"C2:C23";â>0:02:00")
I am struggling to find a formula to calculate hour:minutes between the following:
Cell
A1= 04:00
B2= 17:00
I am wanting to calculate the hours between 06:00 and 16:00 and then the hours between 16:00 and 06:00 the next day
ie: 06:00-16:00 = 12;
16:00 - 0600 = 3
how to find the average times of two different sets of groups. There are the baseline times and intervention times. Both groups have three subtopics: Time Fell Asleep, Woke Up, and Duration (how many hours I slept). I am not sure how to find the average of each subtopic. Here are the times....
Baseline times:
Fell AsleepWoke UpDuration
2:30 AM10:00 AM7:30 hrs
4:30 AM12:30 PM8:00 hrs
[Code]....
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Set rng = ActiveCell.CurrentRegion
Application.StatusBar = _
"Current SUM is: " & _
Application.WorksheetFunction.Sum(rng) & " " & _
"Current AVERAGE is: " & _
Application.WorksheetFunction.Average(rng)
End Sub
I now have the following problems:
I get a errot when i select cells with no number
Run-time error 1004
Unable to get Average property of the WorksheetFunction class
The sum and average stay in the status bar.
The code gets confused after i selected different columns.
I would like the code to work only when i select a range of cells.
Is it possible to move the text in the status bar more to the right?
I need to find the average time it takes students to take exams . I use the following formula =text(end time - start time, "h:mm"). I am able to calculate the amount of time it takes a student to take the exam. Now I need a formula to calculate the average time students take to complete a test. I have over 80 times i need to average. Whenever i try a formula I keep getting 0.
View 9 Replies View RelatedI need get an average call time. I have column C that is the time call started and column D is time call ended. What would I need to get the average call time for the entire sheet? I'll attach a copy of my spreadsheet for you to look at.
View 4 Replies View RelatedI have some data, consisting of two columns. The 1st column consists of time values in the form hh:mm:ss, and the 2nd column consists of a pressure reading, taken every couple of seconds. I wish to find the average pressure from the start time, to a 2nd time, then the average pressure from this 2nd time to a 3rd time, then the the av. pres. from this 3rd time to a 4th time, and so on. The time i want to take the average over varies, sometimes 3 minutes (i.e. ~180 pressure readings), sometimes 4, sometimes 5 minutes. I have to take the average over different ranges dozens of times -
View 2 Replies View RelatedI worked on a countifs function, but i needed a average of column N.
the countif formula is
A2 = current month
=COUNTIFS(
'Location'!J3:J999,">="&$A2,
'Location!J3:J999,"<="&EOMONTH($A2,0),
'Location'!M3:M999,"Name")
With the exceptions from above i need to get a average from column N.
I have 2 rows of data
1. title
2. value
eg
Row 1: Title1, Title2, Title1, Title4, Title2, Title1
Row 2: 2 , 3 , 0 , 1 , 2 , 6
In the above I am looking for the average of Title1, where the value is greater than 0. There are 3 occurances of Title1, but only 2 have values. The answer i am after is Sum is 8, average is 4 (ie 8/2 and not 8/3)
Ceate a formula for weighted averages according to criteria?
I want to know what was the average price I bought a product at on today's date. The average price needs to be weighted against the quantity of product sold.
I have information I'm trying to evaluate. Average Close time. but I need to evaluate it for each month. Forinstance if my average close time was B. and the close date was c. I would need the average(b:b) but only from fields that had a close date of July in column C. is this possible? I hate to have to break up the data set 12 times. (i'm reporting individually for each month of the year so we can see trends.)
View 12 Replies View RelatedI would like is the average of numbers that are on certain sheets with a certain criteria. I have an excel example that might explain more.