Average Over Time Range
Jan 3, 2008
I have some data, consisting of two columns. The 1st column consists of time values in the form hh:mm:ss, and the 2nd column consists of a pressure reading, taken every couple of seconds. I wish to find the average pressure from the start time, to a 2nd time, then the average pressure from this 2nd time to a 3rd time, then the the av. pres. from this 3rd time to a 4th time, and so on. The time i want to take the average over varies, sometimes 3 minutes (i.e. ~180 pressure readings), sometimes 4, sometimes 5 minutes. I have to take the average over different ranges dozens of times -
View 2 Replies
ADVERTISEMENT
May 2, 2014
Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
View 5 Replies
View Related
Oct 21, 2009
[for excel 2000]
Hi chaps, I have a spreadsheet of lap times that I'm trying to generate an average time from. data looks a bit like this (in time format hh:mm:ss) :
01:23:34
01:44:23
01:56:34
01:23:56
-you get the idea. problem is, when calculating an average I get either #DIV/0!,#VALUE! or 00:00:00 depending on the approach I use (the column is definitely time format hh:mm:ss), so far I've tried:
=AVERAGE(H4:H433)
=AVERAGE(IF(H4:H433,H4:H433))
-and so on, none work all give a variation of the aforementioned errors. I've tried changing the column format to number, copying all the data to a new sheet, still no joy. This should be very simple, any idea what am I missing?
View 9 Replies
View Related
Jul 9, 2014
Please find the attached 2010 version excel file <For a given date Time Range average .xlsx>.
I want to calculate the average value (Column C) for the given date (Column A) and given time range (Column B).
Values to be plotted in the color cells yellow and light pink / magenta.
Voting Results.xlsx
View 4 Replies
View Related
Jun 11, 2014
I am having a little trouble with a spreadsheet I am creating, the formulas and cell formatting I should be using to enable this to work.
Here goes:
in cell E3 I have a time started (e.g 12:45 pm), In F3 i have time finished (e.g 2:30 pm)
So, what i'm wanting is the time taken in G3 and also, i have the amount of units that is entered manually in H3. I would like I3 to show the time taken per unit.
View 2 Replies
View Related
Oct 30, 2012
I am trying to average time in col C. I do not want to count zero or time more than 2 minutes 00:02:00
I tried teh following formula. I do not think this is even close.
=AVERAGEIFS("c3:c50000;c3:c50000;”>0”;"C2:C23";”>0:02:00")
View 1 Replies
View Related
Aug 6, 2014
how to find the average times of two different sets of groups. There are the baseline times and intervention times. Both groups have three subtopics: Time Fell Asleep, Woke Up, and Duration (how many hours I slept). I am not sure how to find the average of each subtopic. Here are the times....
Baseline times:
Fell AsleepWoke UpDuration
2:30 AM10:00 AM7:30 hrs
4:30 AM12:30 PM8:00 hrs
[Code]....
View 3 Replies
View Related
May 2, 2007
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Set rng = ActiveCell.CurrentRegion
Application.StatusBar = _
"Current SUM is: " & _
Application.WorksheetFunction.Sum(rng) & " " & _
"Current AVERAGE is: " & _
Application.WorksheetFunction.Average(rng)
End Sub
I now have the following problems:
I get a errot when i select cells with no number
Run-time error 1004
Unable to get Average property of the WorksheetFunction class
The sum and average stay in the status bar.
The code gets confused after i selected different columns.
I would like the code to work only when i select a range of cells.
Is it possible to move the text in the status bar more to the right?
View 9 Replies
View Related
Mar 16, 2004
I need to find the average time it takes students to take exams . I use the following formula =text(end time - start time, "h:mm"). I am able to calculate the amount of time it takes a student to take the exam. Now I need a formula to calculate the average time students take to complete a test. I have over 80 times i need to average. Whenever i try a formula I keep getting 0.
View 9 Replies
View Related
Aug 4, 2007
I need get an average call time. I have column C that is the time call started and column D is time call ended. What would I need to get the average call time for the entire sheet? I'll attach a copy of my spreadsheet for you to look at.
View 4 Replies
View Related
Dec 10, 2013
1st problem concerns entering data as text and it being converted to time. I have found the formula 00:00 which does an excellant job of converting. However, when I want to subtract, (=a2-a1) for example, it treats the time as a number. Sometimes it works, but if the hours are different, say 23:30- 22:10, it will subtract 2330-2210! Is there a way to make this work?
2nd problem, related to the first is when I try to avg a column of times, I get a similar effect.
View 1 Replies
View Related
Jan 22, 2009
This code help me in typing the date and time in any cell of column (B) automatically just in case I enter somthing in any adjacent cell of column (A)
View 6 Replies
View Related
Mar 16, 2009
I would like to create an average function that will take an average of the Column labeled "Gap Time (Hours/Min/Sec)". I only want it to take the average for this for each new start date. These values will change daily so I was hoping that someone may help me write a function that will work when data changes instead of manually taking the average every time data is entered.
View 5 Replies
View Related
Jul 3, 2013
I'm trying to sort column G for any "Approved" or "Denied" outcomes then find the time difference between columns E and F then divide that difference by the number of approved or denied in column G. I've tried a number of combinations of SUMIFS, IFS, COUNTIFS, and Ave formulas but can't come up with one that works. Here's an example of what I'm trying to do:
Sum E-F if G= "Approved" or "Denied" / the number of "Approved" or "Denied" outc
View 12 Replies
View Related
Sep 24, 2010
I am trying to calculate the average Talk Time into Minutes and Seconds. Every time I have tried, I get the wrong average.
For example, if I have a total of 53 calls and the total talk time is 4:19:05, what would the average talk per call be? I tried doing everything in seconds (this would give me a total of 15545 seconds) but the total I was getting is 4:89.
What would the formula be to get the correct average time?
View 5 Replies
View Related
Feb 29, 2012
I am trying to work out average for a particular area based on a criteria.
eg:
E F
Area time
A 01:00
B 02:15
A 01:15
C 01:16
B 01:30
C 03:15
In Cell
E100 - 103 I'm trying to work up the average of each area and using the following formula.
=AVERAGE(IF($E$4:$E$61="A",F4:F61,""))
I keep getting an the following error #value!.
i changed the average to median and still get the error.
View 2 Replies
View Related
Apr 7, 2013
I have a database of over 10,000 entries. I am trying to get the average time for four specific entries (department, test 1, test 2, test 3). I did an averageifs for the tests individually and calculated the average time individually.
The three tests comprise of the department.
Average of test 1 = 40.8
Average of test 2 = 39.9
Average of test 3 = 94.8
Average of dept using the averageifs is 41.3
Average of dept by taking the average of the values above is 58.8
Why is that discrepancy there?
View 6 Replies
View Related
May 22, 2014
Given:
6:21
3:04
2:29
0:48
These represent time it takes for a fax to send. I'm trying to find the average time it takes for these faxes to send. Using the built in @AVERAGE option does produce a number albeit an incorrect number. Wondered if I could convert these to decimal numbers then covert the result back to time - when trying that I don't get an average but rather a time of day - say 5:55:30PM.
View 2 Replies
View Related
Nov 12, 2007
I'm trying to average some time figures labled Avg Time below:
I don't know how to average mm:ss data to give accurate results.
5:09 5:14 5:17 and 5:39 should = an average of about 5:20 but I can't figure out how to use a formula to give me that result. Once I do, I'll apply that to a multitude of other parts of a larger chart.
Drive-in Name: ******, NJ
Drive-in #: 5770Day 1Day 2Day 3Day 4Day 5Day 6Day 7Weekly Totals
Open Date:7-Nov8-Nov9-Nov10-Nov11-Nov12-Nov13-Novand Averages
Sales$12,406.54$13,682.66$14,749.75$15,262.44 $56,101.39
Transactions1,1911,2451,2501,2314,917
Average Check$10.42$10.99$11.80$12.40 $11.41
Sales Per Labor Hour (SPLH)0
Tray Time
Reply Time
Avg Time5:095:145:175:39 0:00
View 9 Replies
View Related
Feb 16, 2014
I have a set of 7 years daily rainfall data. I need to calculate the daily average of rainfall from this 7 years data set. I don't wanted to calculate it by for example copying and pasting the first day rainfall of each year rainfall to a new sheet and average it for all the days. I need to calculate it all at a time.
View 1 Replies
View Related
Apr 28, 2014
I am looking for a way to calculate the average time, over a number of times.
So basically, would have different times in 24 hour hh:mm:ss, all in column i.
I have tried =AVERAGE(i2:i18) and it doesn't work.
I have also tries Ctrl/Shift enter as an array, it didn't work.
I tries to format cells as time and number, it didn't work!
View 1 Replies
View Related
Aug 17, 2006
In A2:A9 are text "time" numbers which may cross midnight
1941
1852
0130
2347
0242
2326
0028
2257
Looking for formulas to place in A10:A11
which can return the average & median of the times in the same text "time" format
View 9 Replies
View Related
Oct 2, 2012
how to calculate average talk time in excel.
View 9 Replies
View Related
Feb 23, 2008
have the follwing worksheet"
Date Rate Qty
2:06:56 PM 199.5 116
2:06:49 PM 199.5 343
2:06:40 PM 199.5 226
2:06:28 PM 199.5 48
2:06:20 PM 199.4 162
2:06:11 PM 199.5 95
2:06:04 PM 199.4 449
2:05:58 PM 199.6 1488
2:05:40 PM 199.5 9
2:05:40 PM 199.5 9
2:05:37 PM 199.4 161
2:05:28 PM 199.6 101
2:05:23 PM 199.35 4605....................................
I would like to calculate the weighed average rate( rate*qty/ total qty durig a period) for different periods say 2.00 pm to 2.01 pm, 2.01pm to 2.02 pm etc. Is there a way to do this by using database(dsum,daverage) functions. What will be the content of the criterion range? Or is there any other way of solving this.
View 2 Replies
View Related
Apr 25, 2008
How do I average the data in column G, based on two conditions (time in column H = $H$1, month in column I = month in $I$1)
Here's the formula I came up with, but it is including blank cells in the calculation.
{ =AVERAGE (IF ($H$3:$H$100=H1, IF (MONTH ($I$3:$I$100) = MONTH(I1), $G$3:$G$100, FALSE), FALSE)) }
View 6 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Apr 3, 2014
In our sql server table, we have a field of type DATETIME. This field is populated by a vendor product with the elapsed time of an event.
We created a SQL Server view of this column and other columns of info joined together from several tables.
Then we create in Excel 2010 a new spreadsheet with a data connection to the SQL Server, instance, and view that we created.
Excel 2010 displays each of the columns in our view.
The elapsed time column appears as "dd hh:mm:ss". However, when we click on a cell to look at its formatting, Excel lists it as general.
We want to calculate the average time in this column.
We go down below the data, click on a cell, and insert =Average(C2:C17215) and we get an error saying dividing by zero.
We have 17,000+ rows of data, so there is no divide by zero math going on here. Each row in this column has data, so there are no blank cells.
We have spent some time web searching. We then tried various methods of calculating this. Nothing has worked. In most cases, we get the divide by zero. We tried some solutions that mention using an array forumula, but that just changed the error to an invalid value error.
View 1 Replies
View Related
Jul 28, 2009
I am working on a Productivity Log and can't figure out a way to count unique values, and also average the time per assignment.
Assignment with the action code A - should take 2 hrs to complete, all other action codes should take 20 minutes.
I need to show how many of each action codes were done for the day, and what was the average time taken to complete each. Even better, how much for A action codes, and how much for all other.
View 3 Replies
View Related
Mar 6, 2014
I am trying to calculate the average start time for a machine over a period. However the machine start time varies from 10:00 pm to past midnight. I have tried reviewing past posts but cannot seem to find a similar query.
View 13 Replies
View Related
Sep 19, 2012
I need to calculate average response time, the problem is that it should be based only on "core hours" and that's between 7am - 6pm.
How to create function that will exclude "out ot hours" time (6pm-7am) from the calculation.
View 3 Replies
View Related
